Structure–Function Relationships in Unsymmetrical Zinc Phthalocyanines for Dye‐Sensitized Solar Cells

Let it shine! The impact of the anchoring group on photovoltaic performance by a series of phthalocyanine sensitisers (see figure) has been demonstrated.

     

Using second-order calibration to identify and quantify aromatic sulfonates in water by high-performance liquid chromatography in the presence of coeluting interferences

We used the Generalized Rank Annihilation Method (GRAM), a second-order calibration method, to quantify aromatic sulfonates in water with high-performance liquid chromatography (HPLC) when interferences coeluted with the analytes of interest. With GRAM, we can quantify in only two chromatographic analyses, one for a calibration sample and one for the unknown sample. The calculated concentrations were not statistically different to those obtained when the chromatographic separation of the unknown sample was modified in order to completely separate the analyte from the interferences before univariate calibration. With GRAM, the concentrations are determined much more quickly because a complete resolution is not required.     

Direct Injection of Plasma Samples and Micellar Chromatography of Procainamide and Its Metabolite N-Acetylprocainamide

Micellar liquid chromatography was employed for the monitoring of procainamide and its metabolite N-acetylprocainamide using a C18 column. Sodium dodecyl sulphate (SDS) and modifier concentrations were optimised in order to obtain minimum analysis time, maximum sensitivity and good resolution. The optimum chromatographic conditions were as follows: flow rate 1 mL min^?1, injection volume 20 μL, temperature at 25 °C, respectively. The mobile phase consisted of 0.05 M SDS-1% (v/v) butanol–phosphate buffer (10 mM, pH 7, 0.9%, w/v) NaCl using a detection wavelength at 280 nm. Validation studies were carried out according to the ICH guideline and included the determination of calibration curves (r ² > 0.999), intra- and inter-day precisions (CV < 3.9%), robustness and interference studies, respectively. The recoveries in spiked serum samples were adjusted. Finally, the optimized method was applied to serum samples of patients treated with antiarrhythmics, and the results were compared with those given by a reference method where a good correlation was obtained.     

Generation of anti-azoxystrobin monoclonal antibodies from regioisomeric haptens functionalized at selected sites and development of indirect competitive immunoassays

Azoxystrobin is a modern strobilurin fungicide used around the world to combat prime diseases affecting highly valuable crops. Accordingly, residues of this chemical are frequently found in food, even though mostly under maximum tolerated levels. We herein describe the development of an indirect competitive immunoassay for the determination of azoxystrobin residues. A panel of monoclonal antibodies displaying subnanomolar affinity to azoxystrobin was generated using, as immunizing haptens in mice, four functionalized derivatives carrying the same spacer arm located at different rationally chosen positions. This collection of antibodies was thoroughly characterized with homologous and heterologous antigens, and the immunoassay consisting of monoclonal antibody AZo6#49 and the coating conjugate OVA–AZb6, which displayed an IC₅₀ value of 0.102 μg L⁻¹ and a LOD of 0.017 μg L⁻¹, was eventually optimized. The response to different pH and ionic strength conditions of the specific assay was studied using a biparametric approach. In addition, the influence of Tween 20 and organic solvents over the assay parameters was also evaluated. After optimization, the developed immunochemical assay was applied to the analysis of azoxystrobin in spiked juices of relevant fruits and vegetables, showing excellent recoveries between 2 and 500 μg L⁻¹.     

A multicommutated flow system for determination of bismuth in milk shakes by hydride generation atomic fluorescence spectrometry incorporating on-line neutralization of waste effluent

A highly sensitive method was developed for determination of bismuth in milk shakes by multicommutation hydride generation atomic fluorescence spectrometry (HG-AFS) based on off-line sonication for 10 min with aqua regia 8% (v/v) and on-line waste treatment. The instrumentation and chemistry variables were studied in order to provide the best performance. The limit of detection in the original samples, established for a probability level of 99.6% (k = 3), was 1.67 ng/g Bi. The method provides a fast alternative in control analysis with a sampling throughput of 72 h as compared with 31 h obtained by the classical continuous measurement. Additionally, multicommutation reduces waste generation by a factor of 2.6. The consumption of sample, reductant, and blank, as compared with continuous mode HG-AFS, was reduced 9.6, 4.5, and 13.3 times, respectively. To confirm the accuracy of the method, recovery studies were performed, and excellent agreement between multicommutation and continuous measurement-based values was obtained. Application of the developed methodology for bismuth determination in milk shake samples from the Spanish market provided concentrations ranging from 4.2 to 15.0 ng/mL, and good comparability with data obtained by continuous measurements after microwave-assisted total digestion of samples for a 95% probability level and 12 degrees of freedom was found.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

Comparative analysis of the conformational profile of substance P using simulated annealing and molecular dynamics

The present study describes an extensive conformational search of substance P using two different computational methods. On the one hand, the peptide was studied using the iterative simulated annealing, and on the other, molecular dynamics simulations at 300 and 400 K. With the former method, the peptide was studied in vacuo with a dielectric constant of 80, whereas using the latter study the peptide was studied in a box of TIP3P water molecules. Analysis of the results obtained using both methodologies was carried out using an in-house methodology using a cluster analysis method based on information theory. Comparison of the two sampling methodologies and the different environment used in the calculations is also analyzed. Finally, the conformational motifs that are characteristic of substance P in a hydrophilic environment are presented and compared with the experimental results available in the literature.     

Preparation of Biodegradable Polylactide Microparticles via a Biocompatible Procedure

PLA MPs are prepared via a novel and toxic‐chemical‐free fabrication route using ethyl lactate, a green solvent and FDA‐approved aroma. MPs are obtained by a solution jet break‐up and solvent displacement method. Adjusting flow parameters allows the tuning of MPs size between 60 and 180 µm, with reduced polydispersity. Morphological analysis shows microporous particles with Janus‐like surface. A fluorophore is successfully loaded into the MPs during their formation step. This versatile green solvent‐based procedure is proven to be suitable for drug encapsulation and delivery applications. The method may be extended to different droplet generation techniques.

     

How good is a Broyden–Fletcher–Goldfarb–Shanno-like update Hessian formula to locate transition structures? Specific reformulation of Broyden–Fletcher–Goldfarb–Shanno for optimizing saddle points

Based on a study of the Broyden–Fletcher–Goldfarb–Shanno (BFGS) update Hessian formula to locate minima on a hypersurface potential energy, we present an updated Hessian formula to locate and optimize saddle points of any order that in some sense preserves the initial structure of the BFGS update formula. The performance and efficiency of this new formula is compared with the previous updated Hessian formulae such as the Powell and MSP ones. We conclude that the proposed update is quite competitive but no more efficient than the normal updates normally used in any optimization of saddle points. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 349–362, 1998