High Temperature Stable Maghemite Nanoparticles Sandwiched between Hectorite Nanosheets

Maghemite (γ-Fe₂O₃) is a metastable iron oxide phase and usually undergoes fast phase transition to hematite at elevated temperatures (>350 °C). Maghemite nanoparticles were synthesized by the polyol method and then intercalated into a highly swollen (>100 nm separation) nematic phase of hectorite. A composite of maghemite nanoparticles sandwiched between nanosheets of synthetic hectorite was obtained. The confinement of the nanoparticles hampered Ostwald ripening up to 700 °C and consequently the phase transition to hematite is suppressed. Only above 700 °C γ-Fe₂O₃ nanoparticles started to grow and undergo phase transition to α-F₂O₃. The structure and the phase transition of the composite was evaluated using X-ray diffraction, TEM, SEM, physisorption, TGA/DSC, and Mößbauer spectroscopy.     

In vivo MR spectroscopy and MR imaging on non-anaesthetized marine fish: techniques and first results

In vivo Magnetic Resonance Imaging (MRI) and Spectroscopy (MRS) experiments were carried out in non-anaesthetized marine fish with a maximum body length of 40 cm using a 4.7 T horizontal magnet. In flow-through animal chambers long-term investigations could be carried out for several days in a sessile benthic zoarcid species, the eelpout Zoarces viviparus, as well as in a pelagic gadid species, the cod Gadus morhua. Sea water adapted probes and optimised excitation and refocusing pulse shapes reduced the negative effects of the highly conductive medium. In both species, in vivo 31P-NMR spectra were collected within 5 minutes with a reasonable signal to noise ratio (PCr/Pi ratio > 40 in cod) and typical line widths in the range of 20 to max. 40 Hz. Magnetic resonance images were recorded in the sessile species without movement artefacts. In these fish it was even possible to measure the blood flow of different vessels with a flow compensated gradient echo sequence and to carry out localized in vivo 1H-NMR spectroscopy in different organs.     

A construction of polynomial lattice rules with small gain coefficients

In this paper we construct polynomial lattice rules which have, in some sense, small gain coefficients using a component-by-component approach. The gain coefficients, as introduced by Owen, indicate to what degree the method improves upon Monte Carlo. We show that the variance of an estimator based on a scrambled polynomial lattice rule constructed component-by-component decays at a rate of N ^{−(2α+1)+δ} , for all δ > 0, assuming that the function under consideration has bounded variation of order α for some 0 < α ≤ 1, and where N denotes the number of quadrature points. An analogous result is obtained for Korobov polynomial lattice rules. It is also established that these rules are almost optimal for the function space considered in this paper. Furthermore, we discuss the implementation of the component-by-component approach and show how to reduce the computational cost associated with it. Finally, we present numerical results comparing scrambled polynomial lattice rules and scrambled digital nets.     

Layered zinc hydroxide salts: delamination, preferred orientation of hydroxide lamellae, and formation of ZnO nanodiscs

Herein, we report our analysis of the surface modification of polystyrene (PS) when treated under ambient conditions with a common biological buffer such as phosphate buffered saline (PBS) or aqueous solutions of the ionic constituents of PBS. Attenuated total reflection Fourier transform infrared spectroscopy was used for the analysis because the resultant spectra are very sensitive to minor changes in the chemical and structural properties of PS films. In addition, ultraviolet-visible spectroscopy was applied to characterize the surface modifications of PS. Treatment with PBS resulted in the most significant chemical and structural surface modifications of the PS films, as compared with each of the solutions of the constituents of PBS, which were tested separately. A multistep mechanism for the wet modification of PS is discussed. We postulate that the observed surface modifications are the result of photo-oxidation/reduction, swelling, and conformational changes and re-arrangement of the polymer chain. The resultant surface modifications could be similar to those produced by commonly used dry processes such as plasma treatments and electron, ion or ultraviolet irradiation. We found that the modifications that occurred in PBS were more stable than those initiated by dry processes. The formation of active groups on the surface of PS can be controlled by adsorption of bovine serum albumin or thermal annealing of PS before PBS treatment. This approach provides a simple and efficient method for the surface modification of PS for biomedical applications.     

Polymethylated [Fe(η6-arene)2]2+ dications: methyl-group rearrangements and application of the EINS mechanism

Reactions between the methylated arenes ArMe(n) [where ArMe(n) = C(6)Me(n)H((6-n)), and n = 1-6] and FeCl(2) in heptane at 90 °C in the presence of anhydrous AlCl(3) give, for the arenes with n = 1-5, extensive isomerisations and disproportionations involving the methyl groups on the arene rings, and the formation of mixtures of [Fe(ArMe(n))(2)](2+) dications that defy separation into pure species. GC-MS studies of AlCl(3)/mesitylene and AlCl(3)/durene reactions in the absence of FeCl(2) (90 °C, 2 h) allow quantitative assessments of the rearrangements, and the EINS mechanism (electrophile-induced nucleophilic substitution) is applied to rationalise the phenomena. By contrast, ArMe(n) / FeCl(2) /AlCl(3) reactions in heptane for 24-36 h at room-temperature proceed with no rearrangements, allowing the synthesis of the complete series of pure [Fe(ArMen)](2+) cations in yields of 48-71%. The pure compounds are characterised by (1)H NMR spectroscopy and electrospray-ionization mass-spectrometry (ESI-MS), and the structures of [Fe(m-xylene)(2)][PF(6)](2) and [Fe(durene)(2)][PF(6)](2) are established by single-crystal X-ray diffraction analyses.     

Electronic and vibrational transition moment directions in 7-dimethylamino-3-methyl-N-methyl-d3-4-phenylethynylcarbostyril

We report the synthesis and photophysical characterization of 7-dimethylamino-3-methyl-N-methyl-d(3)-4-phenylethynylcarbostyril, a chromophore of interest as a rotator in surface-mounted molecular rotors. Measurement of UV-vis absorption and fluorescence spectra, steady state fluorescence and excitation anisotropy, and linear dichroism in the IR and UV-vis permitted a determination of absolute vibrational and electronic transition moment directions in this previously unreported chromophore. The first singlet-singlet absorption and fluorescence are polarized perpendicular to the axle of the rotator. Density functional theory calculations of electronic excitation and vibrational frequencies gave results in very good agreement with those observed. Calculated IR transition moment directions showed rather poor agreement with experiment.     

Crystallization products of risedronate with carbohydrates and their substituted derivatives

The gastrointestinal absorption of bisphosphonates is in general only about 1%. To address this problem mixtures of risedronate monosodium salt with twelve varied sugar alcohols, furanoses, pyranoses and eight gluco-, manno- and galactopyranoside derivatives as counterions were designed in an effort to prepare co-crystals/new entities with improved intestinal absorption. Crystalline forms were generated by means of kinetically and/or thermodynamically controlled crystallization processes. One hundred and fifty-two prepared samples were screened by means of FT-NIR and FT-Raman spectroscopy. No co-crystal was prepared, but noteworthy results were obtained. A new solid phase of risedronate monosodium salt generated in the presence of phenyl-β-d-galactopyranoside under thermodynamically controlled crystallization conditions was found and also characterized using solid state NMR spectroscopy, X-ray powder diffraction and differential scanning calorimetry. This new polymorph was named as form P. Interactions between risedronate monosodium salt and both carbohydrates were confirmed by means of molecular dynamics simulation. In the present study the relationships between the chemical structures of the studied compounds required for crystalline form change are discussed.     

Comparison of various easy-to-use procedures for extraction of phenols from apricot fruits

Phenols are broadly distributed in the plant kingdom and are the most abundant secondary metabolites of plants. Plant polyphenols have drawn increasing attention due to their potential antioxidant properties and their marked effects in the prevention of various oxidative stress associated diseases such as cancer. The objective of this study was to investigate a suitable method for determination of protocatechuic acid, 4-aminobenzoic acid, chlorogenic acid, caffeic acid, vanillin, p-coumaric acid, rutin, ferulic acid, quercetin, resveratrol and quercitrin from apricot samples. A high-performance liquid chromatograph with electrochemical and UV detectors was used. The method was optimized in respect to both the separation selectivity of individual phenolic compounds and the maximum sensitivity with the electrochemical detection. The lowest limits of detection (3 S/N) using UV detection were estimated for ferulic acid (3 μM), quercitrin (4 μM) and quercetin (4 μM). Using electrochemical detection values of 27 nM, 40 nM and 37 nM were achieved for ferulic acid, quercitrin and quercetin, respectively. It follows from the acquired results that the coulometric detection under a universal potential of 600 mV is more suitable and sensitive for polyphenols determination than UV detection at a universal wavelength of 260 nm. Subsequently, we tested the influence of solvent composition, vortexing and sonication on separation efficiency. Our results showed that a combination of water, acetone and methanol in 20:20:60 ratio was the most effective for p-aminobenzoic acid, chlorgenic acid, caffeic acid, protocatechuic acid, ferulic acid, rutin, resveratrol and quercetin, in comparison with other solvents. On the other hand, vortexing at 4 °C produced the highest yield. Moreover, we tested the contents of individual polyphenols in the apricot cultivars Mamaria, Mold and LE-1075. The major phenolic compounds were chlorgenic acid and rutin. Chlorgenic acid was found in amounts of 2,302 mg/100 g in cultivar LE-1075, 546 mg/100 g in cultivar Mamaria and 129 mg/100 g in cultivar Mold. Generally, the cultivar LE-1075 produced the highest polyphenol content values, contrary to Mold, which compared to cultivar LE-1075 was quite poor from the point of view of the phenolics content.     

Preparation of metallochelating microbubbles and study on their site-specific interaction with rGFP-HisTag as a model protein

The histidine-metallochelating lipid complex is one of the smallest high affinity binding units used as tools for rapid noncovalent binding of histidine tagged molecules, especially recombinant proteins. The advantage of metallochelating complex over protein-ligand complexes (e.g., streptavidine-biotin, glutathiontransferase-glutathion) consists in its very low immunogenicity, if any. This concept for the construction of surface-modified metallochelating microbubbles was proved with recombinant green fluorescent protein (rGFP) containing 6His-tag. This protein is easy to be detected by various fluorescence techniques as flow cytometry and confocal microscopy. Microbubbles (MB) composed of DPPC with various contents of metallochelating lipid DOGS-NTA-Ni were prepared by intensive shaking of the liposome suspension under the atmosphere of sulfur hexafluoride. For this purpose, the instrument 3M ESPE CapMix was used. Various techniques (static light scattering, flow cytometry, and optical microscopy) were compared and used for the measurements of the size distribution of MB. All three methods demonstrated that the prepared MB were homogeneous in their size, and the mean diameter of the MB in various batches was within the range of 2.1-2.8 μm (the size range of 1-10 μm). The presence of large MB (8-10 μm) was marginal. Counting of MB revealed that the average amount of MB prepared of 10 mg of phospholipid equaled approximately 10(9) MB/mL. Lyophilized MB were prepared with saccharose as a cryoprotectant. These MB were shown to be stable both in vitro (the estimated half-live of the MB in bovine serum at 37 °C was 3-7 min) and in vivo (mouse). The stability of the MB was affected by molar content of DOGS-NTA-Ni. DPPC-based metallochelating MB provided a clear and very contrast image of the ventricular cavity soon after the injection. Site selective and stable binding of rGFP-HisTag (as a model of His-tagged protein) onto the surface of metallochelating MB was demonstrated by confocal microscopy.