Fluid Flows Around Floating Bodies, I: The Hydrostatic Case

We consider the hydrostatic configuration of a body floating freely on a liquid. Under the influence of gravitational and capillary forces there exists an equilibrium solution with contact angle π/2. This solution is the minimizer of a variational problem with an obstacle condition; the corresponding free boundary consists of the curve where the capillary surface meets the floating body.     

Hypernuclear physics at \overline{\mbox{P}} anda

Samples obtained as a result of the valleriite synthesis process under different conditions (temperature and proportion Cu:Fe:Mg in the initial mixture) were investigated by ⁵⁷Fe M?ssbauer spectroscopy with attraction data of X-ray diffraction. Parameters of hyperfine interactions for valleriite were determined and crystal chemical identification of ⁵⁷Fe subspectra was carried out. It was found that valleriite was formed in samples synthesized at 150°C and 180°C and not formed in samples synthesized at 250°C.     

High speed coding for velocity by archerfish retinal ganglion cells

ABSTRACT: BACKGROUND: Archerfish show very short behavioural latencies in response to falling prey. This raises the question, which response parameters of retinal ganglion cells to moving stimuli are best suited for fast coding of stimulus speed and direction. RESULTS: We compared stimulus reconstruction quality based on the ganglion cell response parameters latency, first interspike interval, and rate. For stimulus reconstruction of moving stimuli using latency was superior to using the other stimulus parameters. This was true for absolute latency, with respect to stimulus onset, as well as for relative latency, with respect to population response onset. Iteratively increasing the number of cells used for reconstruction decreased the calculated error close to zero. CONCLUSIONS: Latency is the fastest response parameter available to the brain. Therefore, latency coding is best suited for high speed coding of moving objects. The quantitative data of this study are in good accordance with previously published behavioural response latencies.     

Synthesis of Novel Thioethers from Polyhalobutadienes and Thiols

Abstract

Substituted perchlorobutadienes were synthesized from the reactions of hexachloro-1,3-butadiene with some thiols in ethanol in the presence of sodium hydroxide. The oxidation products were obtained from the reactions of thioethers with m-chloroperbenzoic acid. The structures of the new compounds were characterized by microanalysis and spectroscopic data.

GRAPHICAL ABSTRACT      

Determination of asymmetric and symmetric dimethylarginines in human plasma by HPLC with electrochemical detection

A new HPLC method was developed and validated for the determination of asymmetric and symmetric dimethylarginines and l ‐arginine in human plasma. After SPE and evaporation of the eluate, the samples were derivatised with an o‐phthaldialdehyde reagent containing 3‐mercaptopropionic acid. The derivatives formed were analysed by isocratic RP‐HPLC with electrochemical detection at +320 mV. The mobile phase consisted of 50 mM phosphate buffer (pH 6.1) containing 10% v/v acetonitrile, the flow rate was 1 mL/min. The retention times of all compounds including monomethylarginine (internal standard) were <24 min. The LODs (S/N 3:1) were 0.012 μM for both dimethylarginines and 0.013 μM for l ‐arginine; the linearity of the method was from 0.1 to 20 μM for both dimethylarginines and from 1 to 200 μM for l ‐arginine. Absolute extraction recoveries measured for all analytes ranged from 85 to 88%.     

Calorimetric determination of the effect of additives on cement hydration process

Possibilities of a multicell isoperibolic-semiadiabatic calorimeter application for the measurement of hydration heat and maximum temperature reached in mixtures of various compositions during their setting and early stages of hardening are presented. Measurements were aimed to determine the impact of selected components?? content on the course of ordinary Portland cement (OPC) hydration. The following components were selected for the determination of the hydration behaviour in mixtures: very finely ground granulated blast furnace slag (GBFS), silica fume (microsilica, SF), finely ground quartz sand (FGQ), and calcined bauxite (CB). A commercial polycarboxylate type superplasticizer was also added to the selected mixtures. All maximum temperatures measured for selected mineral components were lower than that reached for cement. The maximum temperature increased with the decreasing amount of components in the mixture for all components except for silica fume. For all components, except for CB, the values of total released heat were higher than those for pure Portland cement samples.     

Dispersion measurements using time-of-flight remote detection MRI

Remote detection nuclear magnetic resonance and magnetic resonance imaging can be used to study fluid flow and dispersion in a porous medium from a purely Eulerian point of view (i.e., in a laboratory frame of reference). Information about fluid displacement is obtained on a macroscopic scale in a long-time regime, while local velocity distributions are averaged out. It is shown how these experiments can be described using the common flow propagator formalism and how experimental data can be analyzed to obtain effective porosity, flow velocity inside the porous medium, fluid dispersion and flow tracing of fluid.     

Determination of mercury species using thermal desorption analysis in AAS

Analytical aspects of the determination of inorganic mercury (Hg) species by thermal desorption followed by atomic absorption spectrometry (AAS) detection were investigated in this work. Characteristic Hg release curves of the following species were observed: Hg⁰, HgCl₂, HgO, HgSO₄, HgS, and the Hg bound to humic acids. Particular attention was dedicated to the thermal stability and change of bond of Hg⁰ in the following matrices: sand, kaolinite, granite, peat, power plant ash, and soil. The bond of elemental Hg in environmental materials was described on basis of this experiment. Contaminated soil samples from two locations in the Czech Republic were investigated by thermal desorption analysis. Afterwards, the contents of volatile and plant-available Hg in the studied samples were determined. The determination of Hg⁰ using the thermal method was related to the results of liquid sequential extraction. The development of Hg speciation and the stability of Hg were assessed on basis of the data obtained. Thus, the analytical procedure used is a suitable tool for the study of inorganic Hg species in contaminated soils.