Adsorptive stripping voltammetry of Tartrazine at the hanging mercury drop electrode in soft drinks

Adsorptive stripping voltammetry was used for the determination of trace amounts of the dye Tartrazine (E-102) by square-wave (SWS) and differential pulse techniques (DPS). Its adsorptive voltammetric behaviour was investigated at different pH media. NH₄Cl/NH₃ buffer solution was chosen as the most suitable, taking into account the sensitivity and definition of the reduction peaks obtained. The effects of the experimental parameters on the determination are discussed. Standard deviations of 3.3% and 2.6% were obtained by SWS and DPS for 100 and 50 μg/L Tartrazine solutions, respectively (n = 10). Both methods were applied to determine the dye in several commercial soft drinks, containing very small amounts of it. Measurements were made directly in the commercial samples. A comparison of the results obtained by the proposed voltammetric methods with those of an HPLC method was also made. Good correlations between the voltammetric results and the values supplied by the manufacturer were found, whereas recoveries of the same order of magnitude were obtained by the HPLC method. Received: 23 May 1996 / Revised: 5 July 1996 / Accepted: 10 July 1996     

Inter- and intramolecular potential for the N-formylglycinamide-water system. A comparison between theoretical modeling and empirical force fields

An intramolecular NEMO potential is presented for the N-formylglycinamide molecule together with an intermolecular potential for the N-formylglycinamide-water system. The intramolecular N-formylglycinamide potential can be used as a building block for the backbone of polypeptides and proteins. Two intramolecular minima have been obtained. One, denoted as C5, is stabilized by a hydrogen bonded five member ring, and the other, denoted as C7, corresponds to a seven membered ring. The interaction between one water molecule and the N-formylglycinamide system is also studied and compared with Hartree-Fock SCF calculations and with the results obtained for some of the more commonly used force fields. The agreement between the NEMO and SCF energies for the complexes is in general superior to that of the other force fields. In the C7 region the surfaces obtained from the intramolecular part of the commonly used force fields are too flat compared to the NEMO potential and the ab initio calculations. We further analyze the possibility of using a charge distribution obtained from one conformation to describe the charge distribution of other conformations. We have found that the use of polarizabilities and generic dipoles can model most of the changes in charge density due to the different geometry of the new conformations, but that one can expect additional errors in the interaction energies that are of the order of 1 kcal/mol.     

A novel synthesis of 3-cyanoindoles and a new route to indole-3-carboxylic acid derivatives

2-Alkyl-3-cyanoindoles are obtained when 1-alkylmethyl-2-chloro-(or 2-phenylsulfonyl)-3-phenylsulfonylindoles are reacted with excess azide ion (90°/DMF). The reaction is considered to occur by a fragmentation recombination process in which the Schiff's base $\text{12}$ is of central importance. This proposal is supported by the formation of 2-substituted indole-3-carboxylates $\text{17}$ from aldehydes and the α-phenylsulfonyl-$\text{o}$-aminophenylacetic acid ester derivative $\text{16}$.     

Fluorescent behavior of B-phycoerythrin in microemulsions of aerosol OT/water/isooctane

Taking advantage of its unusual fluorescent properties, the incorporation of B-phycoerythrin (B-PE) in aerosol OT (AOT, sodium bis-(2-ethylhexyl) sulphosuccinate)/water/isooctane microemulsions was investigated by following their steady-state and time-resolved fluorescence as a function of the water-to-surfactant molar ratio, w(0). The fluorescent intensity at 575 nm increased continuously with increasing water content, saturating at a w(0) around 35 and staying practically constant at w(0)> or =40. The steady-state anisotropy showed an initial increase with increasing water content until w(0)=23 and then decreased strongly, staying practically constant when w(0)> or =40. The values of the fluorescent parameters, anisotropy and fluorescent intensity, were unchanged when the water content of the system increased in the range between w(0)=40 to 50. This implies the effective incorporation of B-PE in the microemulsion droplets with w(0)> or =40, as well as the equilibrium of the dispersion at these water/surfactant ratios, since higher water content does not affect the main surrounding microenvironment of the protein. The overall incorporation in the microemulsion droplets caused minor spectroscopic changes with respect to biliprotein in aqueous solution of 20 mM sodium phosphate buffer, pH 7.0, such as a blue absorption shift of 3 nm and an emission shift of 1.5 nm, as well as a slight increase in excitation anisotropy spectrum mainly caused by a decrease in protein mobility. Therefore, there are no important interactions between the chromophores and the AOT sulfonate head groups. Emission intensity decays followed complex kinetics in both aqueous and dispersion media. The stability with time and temperature of the biliprotein in the microemulsion was higher than in the aqueous solution. All the results can be explained in terms of B-PE inclusion in the water droplets of AOT microemulsions where the protein has similar configuration and conformation to that in aqueous solution but with the chromophores more protected.     

Determination of complex formation constants by phase sensitive alternating current polarography: Cadmium-polymethacrylic acid and cadmium-polygalacturonic acid

The use of phase sensitive alternating current polarography (ACP) for the evaluation of complex formation constants of systems where electrodic adsorption is present has been proposed. The applicability of the technique implies the previous selection of the phase angle where contribution of capacitive current is minimized. This is made using Multivariate Curve Resolution by Alternating Least Squares (MCR-ALS) in the analysis of ACP measurements at different phase angles. The method is checked by the study of the complexation of Cd by polymethacrylic (PMA) and polygalacturonic (PGA) acids, and the optimal phase angles have been ca. −10° for Cd-PMA and ca. −15° for Cd-PGA systems. The goodness of phase sensitive ACP has been demonstrated comparing the determined complex formation constants with those obtained by reverse pulse polarography, a technique that minimizes the electrode adsorption effects on the measured currents.     

Resolution of global signals using ratio differential pulse polarograms: Determination of p-nitroaniline and p-nitrotoluene in their mixture

Ratio differential pulse polarograms obtained by dividing the multianalyte and single analyte signals are proposed as a tool for resolution of global signals and quantification of the analytes from a qualitatively known mixture by differential pulse polarography (DPP) and related electroanalytical techniques. The influences of shape and position of the resolving function (DP polarograms of individual analyte) on the efficiency of resolution are discussed on simulated and experimental results. The method is applied for the determination of p-nitroaniline (NA) and p-nitrotoluene (NT) from their mixture in N,N′-dimethylformamide solutions with 0.1 M tetrabutylammonium iodide as supporting electrolyte, using an external calibration diagram and internal standard addition methods. NA and NT give one-electron DP polarographic peaks with 93 mV of peak separation and, therefore, show significant overlapping which depends on the concentration ratio of NA and NT in the mixture. The method is especially suitable for quantification of one analyte in the presence of a large excess of another analyte, because by division the component in excess is removed and the pseudo-ratio DPP of the minor component is clearly revealed in a way which is not possible by deconvolution using polynomial division or deconvolution by Fourier transforms.     

Thermochemistry of bis-arene- and arenetricarbonyl-chromium compounds containing hexamethylbenzene, 1,3,5-trimethylbenzene and naphthalene.

Microcalorimetric measurements at elevated temperatures of the heats of thermal decomposition and iodination have led to values of the standard enthalpies of formation of the following crystalline compounds (values given in kJ mol^?1) at 298K: [Cr(η⁶-1,3,5-C₆H₃(CH₃)₃)₂] = (63±12); [Cr(η⁶-C₆(CH₃)₆)₂] : -(88±12); [Cr(1,2,3,4,4a,8a-η-C₁₀H₈)₂] = (407±11); [Cr(CO)₃(1,2,3,4,4a,8a-η-C₁₀H₈)] = -(258±8). Separate measurements by the vacuum sublimation microcalorimetric technique gave the following values for the enthalpy of sublimation at 298K (kJ mol^?1) : [Cr(η⁶-1,3,5-C₆H₃(CH₃)₃)₂] = (104±1); [Cr(η⁶-C₆(CH₃)₆)₂] = (119±4); [Cr(CO)₃(1,2,3,4,4a,8a-η-C₁₀H₈)] = (107±3). From these and other data, the bond enthalpy contributions of the metal-ligand bonds in the gaseous metal complexes were evaluated as follows: [(η₆-C₆(CH₃)₆)-Cr] (155±7); [(η⁶-C₆H₃(CH₃)₃)-Cr] (151±6); [(1,2,3,4,4a, 8a-η-C₁₀H₈)-Cr](145±6) kJ mol^?1]The question of the transferability of the enthalpy contributions of chromium—ligand bonds between organochronium complexes is discussed with aid of information from structural and spectroscopic investigation. The limitations of the procedure are defined.The thermodynamic data are used to discuss various substitution, redistribution and exchange reaction of Cr(η-arene)₂ and [Cr(CO)₃(η-arene)] compounds.     

A genetic algorithm for structure-based de novo design

Genetic algorithms have properties which make them attractive in de novo drug design. Like other de novo design programs, genetic algorithms require a method to reduce the enormous search space of possible compounds. Most often this is done using information from known ligands. We have developed the ADAPT program, a genetic algorithm which uses molecular interactions evaluated with docking calculations as a fitness function to reduce the search space. ADAPT does not require information about known ligands. The program takes an initial set of compounds and iteratively builds new compounds based on the fitness scores of the previous set of compounds. We describe the particulars of the ADAPT algorithm and its application to three well-studied target systems. We also show that the strategies of enhanced local sampling and re-introducing diversity to the compound population during the design cycle provide better results than conventional genetic algorithm protocols.     

Synthesis and Characterization of Heterodinuclear IrCo, RuCo, IrNi, and RuNi Complexes Containing Pyrazolate and Pyrazolylborate Ligands

Treatment of the metallo ligands [ML(pz)(2)(Hpz)] (pz = pyrazolate; L = C(5)Me(5), M = Ir (1); L = mesitylene, M = Ru (3)) with [M'Cl{HB(3-i-Pr-4-Br-pz)(3)}] (M' = Co (4), Ni (5)) yields heterodinuclear complexes of formula [LM(&mgr;-pz)(2)(&mgr;-Cl)M'{HB(3-i-Pr-4-Br-pz)(3)}] (L = C(5)Me(5); M = Ir; M' = Co (6), Ni (7). L = mesitylene; M = Ru; M' = Co (8)). The related complex [Ru(eta(6)-p-cymene)(pz)(2)(Hpz)] (2) reacts with equimolar amounts of 4 or 5 to give mixtures of the corresponding bis(&mgr;-pyrazolato) &mgr;-chloro complexes [(eta(6)-p-cymene)Ru(&mgr;-pz)(2)(&mgr;-Cl)M'{HB(3-i-Pr-4-Br-pz)(3)}] (M' = Co (9), Ni (10)) and the triply pyrazolato-bridged complexes [(eta(6)-p-cymene)Ru(&mgr;-pz)(3)M'{HB(3-i-Pr-4-Br-pz)(3)}] (M' = Co (11), Ni (12)). Complex 1 reacts with 5 in the presence of KOH to give the IrNi complex [(eta(5)-C(5)Me(5))Ir(&mgr;-pz)(3)Ni{HB(3-i-Pr-4-Br-pz)(3)}] (13) whereas its reaction with 4 and KOH rendered the bis(&mgr;-pyrazolato) &mgr;-hydroxo complex [(eta(5)-C(5)Me(5))Ir(&mgr;-pz)(2)(&mgr;-OH)Co{HB(3-i-Pr-4-Br-pz)(3)}] (14). The molecular structure of the heterobridged IrCo complex (6) and those of the homobridged RuNi (12) and IrNi (13) complexes have been determined by X-ray analyses. Compound 6 crystallizes in the monoclinic space group P2(1)/n, with a = 10.146(5) ?, b = 18.435(4) ?, c = 22.187(13) ?, beta = 97.28(4) degrees, and Z = 4. Complex 12 is monoclinic, space group P2(1), with a = 10.1169(7) ?, b = 21.692(2) ?, c = 11.419(1) ?, beta = 112.179(7) degrees, and Z = 2. Compound 13 crystallizes in the monoclinic space group Cc, with a = 13.695(2) ?, b = 27.929(6) ?, c = 13.329(2) ?, beta = 94.11(4) degrees, and Z = 4. All the neutral complexes 6, 12, and 13 consist of linear M.M'.B backbones with two (6) or three (12, 13) pyrazolate ligands bridging the dimetallic M.M' units and three substituted 3-i-Pr-4-Br-pz groups joining M' to the boron atoms. The presence in the proximity of the first-row metal M' of the three space-demanding isopropyl substituents of the pyrazolate groups induces a significant trigonal distortion of the octahedral symmetry, yielding clearly different M'-N bond distances on both sides of the ideal octahedral coordination sphere of these metals.     

31P NMR spectroscopy as a powerful tool for the determination of enantiomeric excess and absolute configurations of alpha-amino acids

An easy method for the determination of the enantiomeric excess (ee) of mixtures of alpha-amino acids, and also for the elucidation of the absolute configuration of each component of the mixture, is reported. The method is based on the formation of diastereoisomers by reaction of the enantiomerically pure acetylacetonate derivative [Pd(acac-O,O')(P(2)-dach)]ClO(4) (4) [P(2)-dach = (1R,2R)-C(6)H(10)(NHPPh(2))(2)] with d,l-mixtures of alpha-amino acids AaH (Pd:AaH = 1:1 molar ratio, refluxing MeOH). The reaction occurs with protonation of the acac ligand and N,O-coordination of the amino acidate group, giving the corresponding [Pd(Aa-N,O)(P(2)-dach)]ClO(4) complexes l-5 and d-6. The composition of these mixtures of amino acidate complexes was analyzed by integration of the corresponding peaks (four doublets, two for each diastereomer) in their (31)P((1)H) NMR spectra. A series of 14 alpha-amino acids was studied (a, alanine; b, 2-aminobutyric acid; c, valine; d, phenylalanine; e, proline; f, leucine; g, isoleucine; h, norleucine; i, serine; j, threonine; k, methionine; l, aspartic acid; m, glutamine; n, cysteine), and excellent agreement between the expected values of ee and those obtained from integration of the (31)P((1)H) NMR spectra was obtained. Moreover, the position of the signals of each isomer is diagnostic, in such a way that the outer doublets are always due to the l-derivatives 5a-l, while the inner ones are due to the d-derivatives 6a-l, allowing the assignation of absolute configurations to each isomer in the mixture.