New green synthesis and formulations of acyclovir prodrugs

Different green synthesis of alkyl esters of acyclovir (acyclovir prodrugs) is described. Hexanoic, decanoic, dodecanoic and tetradecanoic acyclovir esters were synthesized reacting acyclovir and the respective acid anhydride in dimethyl sulfoxide (DMSO), in solvents from renewable sources and without solvent (T=30 °C). Yields in prodrugs after 10 min of reaction were >95% using DMSO as solvent. The purification methodology was very simple, shorter and greener than previously described. The biosolvent, N,N-dimethylamide of decanoic acid, let us to obtain >95% yield at 24 h. This oily biosolvent is not dermotoxic and the reaction crude can directly be used in topic formulations. Syntheses without solvent proceeded successfully for acyclovir esters. Indeed, dodecanoate and tetradecanoate yielding >98% conversion of reactants in 30 min. In spite of requiring mild temperature (65 °C), substrate molar ratios were lowered to 1 : 1, thus conducing to a more efficient use of raw materials. The synthetic procedures were scaled up to a 300 g batch (yield 98-99% isolated ester). These esters can be used as acyclovir prodrugs in topic formulations. The esters release from an oil/water micro-emulsion and a hydrogel formulation were tested with good results.     

Oxovanadium complexes in catalytic oxidations

This contribution is an overview on recent advances (since 2000) on the application of oxovanadium complexes as catalysts or mediators for oxidations by molecular oxygen, peroxidative oxygenations (both including epoxidations), halogenations and carboxylations of aliphatic and aromatic hydrocarbons, and/or olefins, toward the syntheses of a variety of organic compounds, such as alcohols, ketones, epoxides, aldehydes, organohalides and orcarboxylic acids. Some of these systems operate in liquid media, whereas others involve VO-catalysts immobilized on solid supports.     

Improving quantitative gas chromatography-electron ionization mass spectrometry results using a modified ion source: demonstration for a pharmaceutical application

Gas chromatography-mass spectrometry is a well established analytical technique. However, mass spectrometers with electron ionization sources may suffer from signal drifts, hereby negatively influencing quantitative performance. To demonstrate this phenomenon for a real application, a static headspace-gas chromatography method in combination with electron ionization-quadrupole mass spectrometry was optimized for the determination of residual dichloromethane in coronary stent coatings. Validating the method, the quantitative performance of an original stainless steel ion source was compared to that of a modified ion source. Ion source modification included the application of a gold coating on the repeller and exit plate. Several validation aspects such as limit of detection, limit of quantification, linearity and precision were evaluated using both ion sources. It was found that, as expected, the stainless steel ion source suffered from signal drift. As a consequence, non-linearity and high RSD values for repeated analyses were obtained. An additional experiment was performed to check whether an internal standard compound would lead to better results. It was found that the signal drift patterns of the analyte and internal standard were different, consequently leading to high RSD values for the response factor. With the modified ion source however, a more stable signal was observed resulting in acceptable linearity and precision. Moreover, it was also found that sensitivity improved compared to the stainless steel ion source. Finally, the optimized method with the modified ion source was applied to determine residual dichloromethane in the coating of coronary stents. The solvent was detected but found to be below the limit of quantification.     

Nanostructure of polysaccharide complexes

The interaction of gum arabic (GA) with chitosan (Ch) of different degree of deacetylation was studied by turbidity measurements, dynamic light scattering and atomic force microscopy. The structure of the complexes was found to be directly related to the charge density of chitosan molecules. Gum arabic and chitosan with a degree of deacetylation of 75% form soluble complexes with a loosely globular structure of about 250 nm, at weight ratios up to 1.2, if the concentrations are kept low (total biopolymer concentration up to 0.06%). If chitosan has a higher charge density (degree of deacetylation of 93%), colloidal particles are formed, independently of the polymer concentration or ratio. At low concentrations and GA/Ch ratios of 1 or 1.2, the particles have diameters of 200-250 nm. The formation of soluble complexes is attributed to a chitosan lower charge density and the presence of non-charged monomers, which prevent the efficient self-assembly of the macromolecules.     

Alcohol and metal determination in alcoholic beverages through high-temperature liquid-chromatography coupled to an inductively coupled plasma atomic emission spectrometer

In the present work, an inductively coupled plasma atomic emission spectrometry (ICP-AES) system was used as a high temperature liquid chromatography (HTLC) detector for the determination of alcohols and metals in beverages. For the sake of comparison, a refractive index (RI) detector was also employed for the first time to detect alcohols with HTLC. The organic compounds studied were methanol, ethanol, propan-1-ol and butan-1-ol (in the 10-125 mg/L concentration range) and the elements tested were magnesium, aluminum, copper, manganese and barium at concentrations included between roughly 0.01 and 80 mg/L. Column heating temperatures ranged from 80 to 175 °C and the optimum ones in terms of peak resolution, sensitivity and column lifetime were 125 and 100 °C for the HTLC-RI and HTLC-ICP-AES couplings, respectively. The HTLC-ICP-AES interface design (i.e., spray chamber design and nebulizer type used) was studied and it was found that a single pass spray chamber provided about 2 times higher sensitivities than a cyclonic conventional design. Comparatively speaking, limits of detection for alcohols were of the same order for the two evaluated detection systems (from 5 to 25 mg/L). In contrast, unlike RI, ICP-AES provided information about the content of both organic and inorganic species. Furthermore, temperature programming was applied to shorten the analysis time and it was verified that ICP-AES was less sensitive to temperature changes and modifications in the analyte chemical nature than the RI detector. Both detectors were successfully applied to the determination of short chain alcohols in several beverages such as muscatel, pacharan, punch, vermouth and two different brands of whiskeys (from 10 to 40 g of ethanol/100 g of sample). The results of the inorganic elements studied by HTLC-ICP-AES were compared with those obtained using inductively coupled plasma mass spectrometry (ICP-MS) obtaining good agreement between them. Recoveries found for spiked samples were close to 100% for both, inorganic elements (with both HLTC-ICP-AES and ICP-MS) and alcohols (with both HTLC-ICP-AES and HTLC-RI hyphenations).     

A new high-performance liquid chromatographic method with evaporative light scattering detector for the analysis of phospholipids. Application to Iberian pig subcutaneous fat

A new method for the analysis of phospholipids by normal-phase HPLC is described using a silica column. Addition of ammonia and triethylamine to a gradient based on chloroform/methanol/water promoted a good and rapid separation of phospholipid classes (20 min run). The use of an evaporative light scattering detector permitted an accurate analysis of a mixture of phospholipids. Calibration curves were linear within different range for each phospholipid class. The LOD and LOQ obtained were below 0.03 and 0.05 mg kg⁻¹ for all cases, respectively. Besides, a new method for the separation of phospholipids from total lipids before HPLC analysis by a solid-phase extraction (SPE) with Si cartridges has been developed. This methodology gave a good recovery ranging from 97 to 117%. The method was validated with a standard mixture of phospholipids. This method has been applied to characterize the phospholipid fraction of subcutaneous fat from Iberian pig. Cardiolipin, phosphatidylethanolamine, phosphatidylinositol, phosphatidylserine, phosphatidylcholine, and sphingomyelin have been described for first time in these samples. The fatty acid composition of the different phospholipid classes and their HPLC electrospray ionization mass spectrometry have been used for characterizing the molecular species present in each one.     

Hydrophilic interaction liquid chromatography in food analysis

The use of hydrophilic interaction liquid chromatography (HILIC) in food analysis in the last decade is reviewed. The HILIC mechanism is briefly discussed, but main emphasis is put on the use of HILIC for separation of different food matrices. The food matrices are divided into food of animal origin and related products, vegetables, fruits and related compounds, and other food-related matrices. A list on important applications is provided for each category including experimental conditions and a brief summary of the results. The 100 references included will provide the reader a comprehensive overview and insight into HILIC applications to food analysis.     

Acid natural clinoptilolite: structural properties against adsorption/separation of n-paraffins

The employment of an acid natural clinoptilolite (AZH-1) in the adsorption and separation of n-paraffins has been evaluated. Natural clinoptilolite, NZ, was the raw material used to prepare the sodium-exchanged clinoptilolite (AZ) starting from which the AZH-1 sample was obtained by acid treatment. The structural stability of the samples after the applied treatments was demonstrated. The nitrogen adsorption experiments indicated that the acid sample has a homogeneous porous distribution and a considerable increase in the micropore volume with respect to NZ and AZ. The employment of the inverse gas chromatography at infinite dilution (IGCID) allowed studying the adsorption and separation of n-paraffin mixtures on AZH-1. It was also confirmed that the diffusion on AZH-1 took place in an unblocked structure through the A channel of ten members with minimal interactions. The IGCID results demonstrated the capacities of the acid Cuban natural zeolite in the adsorption and separation of n-paraffin mixtures.     

Molecular aspects of the interaction between plants sterols and DPPC bilayers: an experimental and theoretical approach

The effect of sterols composition in a lipid bilayer was investigated on membranes of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and mixtures with the plant sterols β-sitosterol and stigmasterol. Differential scanning calorimetry, 1,6-diphenyl-1,3,5-hexatriene (DPH) fluorescence polarization and infrared spectroscopy studies showed that both sterols changed the packing of the membrane and the hydration of the polar headgroup of the phospholipids, disordering the gel phase and, vice versa, ordering the membrane in the liquid crystalline phase. In all cases some differences among β-sitosterol and stigmasterol could be observed, being β-sitosterol slightly more efficient than stigmasterol in ordering a fluid membrane, bringing the membrane to a more packed liquid ordered phase. Molecular dynamic simulations were carried out to better characterize the distinct behavior of both sterols in a DPPC-membrane. The calculated parameters agreed quite well with the experimental results and a molecular model is proposed to explain differences in the sterols molecules and their effect on the DPPC-bilayer.