The linear polarization constant of R n

Summary He present work deals with estimations of the n-th linear polarization constant c(H)_n of an n-dimensional real Hilbert space H. We provide some new lower bounds on the value of sup_║y║=1 │1,y> ... n,y>│, where x₁, ... ,x_n are unit vectors in H. In particular, the results improve an earlier estimate of Marcus. However, the intriguing conjecture c(H) _n= n^n/2 remains open.     

Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Champ de vitesse dans un échangeur à vortex en régime turbulentHeat exchanger velocity field with turbulent inlet condition

We consider the isothermal flow through a cylindrical flat chamber, a model of some particular heat exchanger, for which LDV measurements and a numerical simulation have been performed. Experimental results show the establishment of an important vortex zone, the secondary flow extending all along the chamber radius. This observation leads to an expected significant increase of the fluid mixing. Results issued from the numerical simulation appear to be in close agreement with experimental data. Nevertheless, the k–ε model used here must be improved to obtain a better approach near the vortex centre. To cite this article: S. Petitot et al., C. R. Mecanique 330 (2002) 593–599.     

Predicting automobile claims bodily injury severity with sequential ordered logit models

Despite the large cost of bodily injury (BI) claims in motor insurance, relatively little research has been done in this area. Many companies estimate (and therefore reserve) bodily injury compensation directly from initial medical reports. This practice may underestimate the final cost, because the severity is often assessed during the recovery period. Since the evaluation of this severity is often only qualitative, in this paper we apply an ordered multiple choice model at different moments in the life of a claim reported to an insurance company. We assume that the information available to the insurer does not flow continuously, because it is obtained at different stages. Using a real data set, we show that the application of sequential ordered logit models leads to a significant improvement in the prediction of the BI severity level, compared to the subjective classification that is used in practice. We also show that these results could improve the insurer’s reserves notably.     

Acetylene weak bands at 2.5 μm from intracavity Cr:ZnSe laser absorption observed with time-resolved Fourier transform spectroscopy

The spectral dynamics of a mid-infrared multimode Cr(2+):ZnSe laser located in a vacuum sealed chamber containing acetylene at low pressure is analyzed by a stepping-mode high-resolution time-resolved Fourier transform interferometer. Doppler-limited absorption spectra of C(2)H(2) in natural isotopic abundance are recorded around 4000 cm(-1) with kilometric absorption path lengths and sensitivities better than 3 10(-8) cm(-1). Two cold bands are newly identified and assigned to the ν(1)+ν(4) (1) and ν(3)+ν(5) (1) transitions of (12)C(13)CH(2). The ν(1)+ν(5) (1) band of (12)C(2)HD and fourteen (12)C(2)H(2) bands are observed, among which for the first time ν(2)+2ν(4) (2)+ν(5) (-1).     

Left, right, and inner socles of associative systems

We investigate the basic properties of the different socles that can be considered in not necessarily semiprime associative systems. Among other things, we show that the socle defined as the sum of minimal (or minimal and trivial) inner ideals is always an ideal. When trivial inner ideals are included, this inner socle contains the socles defined in terms of minimal left or right ideals. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Coherent-Path Model for Nuclear Resonant Gamma-Ray Scattering: An Overview

Hyperfine Interactions - A “coherent-path” model for nuclear-resonant scattering of gamma radiation from resonant matter has been developed and is summarized here. The solution provides...     

A simple formula for mean multiplexing delay for independent regenerative sources

Simple expressions are given for the mean delay, mean waiting time, and mean busy period length in a multiplexer. Data streams with active periods having a general distribution are permitted, and the data rate during the active periods can be random. Data can also arrive in batches. The key restrictions of the model are that the sources are independent, idle periods are exponentially distributed, and a source generates at least enough data during an active period to keep the server busy throughout the period. The exact formulas allow evaluation of the error in approximations such as a heavy traffic diffusion approximation.Both continuous and discrete time models are considered. The discrete-time model includes that studied by Viterbi and subsequently generalized by Neuts. The Pollaczek-Khinchine formula for the mean amount of work in anM/GI/1 queue is retrieved as a limiting case.Preliminary version presented at IEEE INFOCOM, San Francisco, April 1993.