The effect of packing density of cellulose plugs on streaming potential phenomena

An experimental investigation on streaming potentials of porous plugs of cellulose in both the linear and the non-linear range is described. The variation of the electrokinetic coefficients as a function of fibre concentration in the porous pad has been studied, using solutions of different concentration of Congo Red dye as a permeant. The trend observed for changes of both linear electrokinetic coefficientL ₂₁ and non-linear coefficientL ₂₁₁ as packing density,c _F, increases, is somewhat analogous, the similarity suggesting some proportionality between both coefficients. The electroviscous effect accounts for the decrease ofL ₂₁₁ with the increase ofc _F. The coefficientL ₂₂₁ was found to be always negative and, in absolute value, to decrease with increasingc _F. Second-order coefficients have been interpreted in terms of modifications of “generalized conductivities” produced by the changes of thermodynamic forces.     

Thermochemical properties of benzoic acid derivatives VIII. Enthalpies of combustion and formation of o-, m-, and p- t-butylbenzoic acids

The enthalpies of formation in the crystalline state at 298.15 K of o-, m-, and p-t-butyl-benzoic acids have been determined by static-bomb calorimetry. Vapour-pressure determinations were made by the Knudsen-effusion technique and the sublimation enthalpies at the mean temperatures of the measurement ranges have been derived for the three acids. The values obtained are:

     

993.

Thermal characterization of UHMWPE stabilized with natural antioxidants     

M. Peltzer  J. R. Wagner  A. Jiménez 《Journal of Thermal Analysis and Calorimetry》2007,89(2):493-497

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

994.

The preparation of a new "safety catch" ester linker for solid-phase synthesis     

Beech CL  Coope JF  Fairley G  Gilbert PS  Main BG  Plé K 《The Journal of organic chemistry》2001,66(7):2240-2245

A new "safety catch" linker for esters has been synthesized on polystyrene resin. This 2-tert-butoxyphenol resin 10 may be acylated to give a relatively stable ester that will allow nucleophilic chemistry without reaction at the linking ester group. Removal of the tert-butyl group with acid unmasks a highly reactive 2-hydroxyphenyl ester that reacts readily with nucleophiles to cause release of the product from the resin. This sequence has been exemplified by acylating the resin with various bromo acids, carrying out nucleophilic displacements with thiols, phenols, or amines, activating the ester with trifluoroacetic acid and cleaving from the resin with amines to give the (nucleophile) substituted carboxamides in high yield and purity. Kinetic studies with a model ester revealed half-lives for reaction with morpholine of 119 h for the tert-butoxyphenyl ester and 1 min for the corresponding phenol.     

995.

Polarized basis sets of Slater-type orbitals: H to Ne atoms     

Ema I  García De La Vega JM  Ramírez G  López R  Fernández Rico J  Meissner H  Paldus J 《Journal of computational chemistry》2003,24(7):859-868

We present three Slater-type atomic orbital (STO) valence basis (VB) sets for the first and second row atoms, referred to as the VB1, VB2, and VB3 bases. The smallest VB1 basis has the following structure: [3, 1] for the H and He atoms, [5, 1] for Li and Be, and [5, 3, 1] for the B to Ne series. For the VB2 and VB3 bases, both the number of shells and the number of functions per shell are successively increased by one with respect to VB1. With the exception of the H and Li atoms, the exponents for the VB1 bases were obtained by minimizing the sum of the Hartree-Fock (HF) and frozen-core singles and doubles configuration interaction (CISD FC) energies of the respective atoms in their ground state. For H and Li, we minimized the sum of the HF and CISD FC energies of the corresponding diatoms (i.e., of H(2) or Li(2)) plus the ground-state energy of the atom. In the case of the VB2 basis sets, the sum that was minimized also included the energies of the positive and negative ions, and for the VB3 bases, the energies of a few lowest lying excited states of the atom. To account for the core correlations, the VBx (x = 1, 2, and 3) basis sets for the Li to Ne series were enlarged by one function per shell. The exponents of these extended (core-valence, CV) basis sets, referred to, respectively, as the CVBx (x = 1, 2, and 3) bases, were optimized by relying on the same criteria as in the case of the VBx (x = 1, 2, and 3) bases, except that the full CISD rather than CISD FC energies were employed. We show that these polarized STO basis sets provide good HF and CI energies for the ground and excited states of the atoms considered, as well as for the corresponding ions.     

996.

Micellar liquid chromatography: suitable technique for screening analysis     

Ruiz-Angel MJ  Caballero RD  Simó-Alfonso EF  García-Alvarez-Coque MC 《Journal of chromatography. A》2002,947(1):31-45

The screening capability of micellar liquid chromatography (MLC) is discussed using the reported chromatographic data of several sets of compounds (amino acids, beta-blockers, diuretics, phenethylamines, phenols, polynuclear aromatic hydrocarbons, steroids and sulfonamides) and new results (sulfonamides and steroids). The chromatographic data are treated with an interpretive optimisation resolution procedure to obtain the best separation conditions. Usually, the pH and the concentration of surfactant (sodium dodecyl sulfate, SDS, or cetyltrimethylammonium bromide) for the optimal mobile phase were 2.5-3 and < 0.12 M, respectively. The nature and concentration of organic solvent depended on the polarity of the eluted compounds: a low volume fraction of propanol (approximately 1%, v/v) was useful to separate the amino acids, with log P(o/w) < -1 (where P(o/w) is the octanol-water partition coefficient). A greater concentration of this solvent (approximately 5-7%) was needed for compounds in the range -1 < log P(o/w) < 2, as with the studied diuretics and sulfonamides, and a high concentration of propanol (approximately 15%) or a low concentration of butanol (< 10%) had to be used for less polar compounds with 1 < log P(o/w) < 3, such as the beta-blockers. Pentanol (< 6%) was more suitable for the even less polar compounds with log P(o/w) > 3, such as the steroids. For basic drugs such as the phenethylamines (0 < log P(o/w) < 1.7), eluted with a micellar eluent of anionic SDS, propanol was too weak. A study is also shown for mixtures of sulfonamides (log P(o/w) = -1.2 to 1.7) and steroids (log P(o/w) = 3.0-8.1) eluted from conventional C18 columns with SDS mobile phases containing acetonitrile and 1-pentanol, respectively, which are compared with classical acetonitrile-water and methanol-water mixtures. The results complement a previous study on beta-blockers (log P(o/w) = -0.03 to 2.8) and reveal that MLC is a very competitive technique for the screening of compounds against conventional RPLC, due to its peculiar behaviour with regard to the selectivity and elution strength. The concentration of organic solvent needed to obtain sufficiently low retention times (even for highly hydrophobic steroids with log P(o/w) = 7-8) is also appreciably smaller for MLC, which reduces the environmental impact of the mobile phases.     

997.

Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles     

Laura M. Bruno  José L. de Lima Filho  Eduardo H. de M. Melo  Heizir F. de Castro 《Applied biochemistry and biotechnology》2004,113(1-3):189-199

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

998.

Extraction of macro- and microamounts of lanthanides by D2EHPA     

V. Jedináková  V. Bílek  Z. Dvořák  B. Doležal 《Journal of Radioanalytical and Nuclear Chemistry》1990,139(1):135-142

The effect of macroconcentration (Ma) lanthanide extraction on the microcomponent (Mi) extraction by D2EHPA was investigated. The investigation corroborated that the macrocomponent suppresses the microcomponent extraction. The extractability of Mi decreases with increasing Ma concentration and with increasing proton lanthanide number in macroconcentrations. Semi-empirical relations were derived describing lanthanide extraction in lanthanide macro- and microconcentrations as a function of the extraction of lanthanide macroconcentrations. Under the conditions discussed, these relations can be used to estimate for any lanthanide the distribution ratios for the lanthanide applied as a macrocomponent and for Eu applied as a microcomponent.     

999.

Kinetic determination of tellurium based on its inhibitory effect on the palladium(II)-catalysed reaction between pyronine G and hypophosphite ion     

C Sánchez-Pedre?o  M I Albero  M Soledad García  A Saez 《The Analyst》1990,115(9):1257-1260

A kinetic method for the determination of Te based on its inhibitory effect on the PdII-catalysed reaction between pyronine G and H2PO2- is described. The influence of experimental variables on the rate of the process and the potential interfering effect of a large number of ions has been studied. Under the selected experimental conditions: 6 x 10(-5) M pyronine G; 0.6 M H2PO2-; pH 2.6, adjusted with Britton-Robinson buffer; 0.80 microgram ml-1 of PdII; and a temperature of 22 +/- 0.2 degrees C, Te was determined in the concentration range 0.08-0.85 microgram ml-1. The method was applied to the determination of Te in waters and lead concentrates.     

1000.

Applications of the dicarbollylcobaltate(III) anion in the water/nitrobenzene extraction system     

Makrlík E  Va Nura P 《Talanta》1985,32(5):423-429

The fundamental properties of the polyhedral sandwich dicarbollylcobaltate(III) anion {[pi-(3)-1,2-B(9)C(2)H(11)](2)Co(III)}(-) are given, together with results for extraction of alkali-metal, alkaline-earth metal and some other cations (e.g., H(+), Pb(2+), Pd(2+) and Ce(3+)) into nitrobenzene and corresponding analytical applications. Considerable attention is paid to charge-transfer through the water-nitrobenzene interface in the presence of this hydrophobic anion.     

[首页] « 上一页 [95] [96] [97] [98] [99] 100 下一页 » 末  页»

	$\text{ΔH}{}_{\mathrm{f}}{}^{\mathrm{o}}\text{(c, 298.15 K)/kJ mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{s}}\text{/kJ mol}{}^{\mathrm{?1}}$
o-t-butylbenzoic acid	476.2 ± 1.9	99.8 ± 0.4	(at 314.6 K)
m-t-butylbenzoic acid	504.3 ± 1.6	103.0 ± 0.5	(at 326.5 K)
p-t-butylbenzoic acid	502.9 ± 1.7	103.8 ± 0.4	(at 334.1 K)

Thermal characterization of UHMWPE stabilized with natural antioxidants

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

The preparation of a new "safety catch" ester linker for solid-phase synthesis

A new "safety catch" linker for esters has been synthesized on polystyrene resin. This 2-tert-butoxyphenol resin 10 may be acylated to give a relatively stable ester that will allow nucleophilic chemistry without reaction at the linking ester group. Removal of the tert-butyl group with acid unmasks a highly reactive 2-hydroxyphenyl ester that reacts readily with nucleophiles to cause release of the product from the resin. This sequence has been exemplified by acylating the resin with various bromo acids, carrying out nucleophilic displacements with thiols, phenols, or amines, activating the ester with trifluoroacetic acid and cleaving from the resin with amines to give the (nucleophile) substituted carboxamides in high yield and purity. Kinetic studies with a model ester revealed half-lives for reaction with morpholine of 119 h for the tert-butoxyphenyl ester and 1 min for the corresponding phenol.     

Polarized basis sets of Slater-type orbitals: H to Ne atoms

We present three Slater-type atomic orbital (STO) valence basis (VB) sets for the first and second row atoms, referred to as the VB1, VB2, and VB3 bases. The smallest VB1 basis has the following structure: [3, 1] for the H and He atoms, [5, 1] for Li and Be, and [5, 3, 1] for the B to Ne series. For the VB2 and VB3 bases, both the number of shells and the number of functions per shell are successively increased by one with respect to VB1. With the exception of the H and Li atoms, the exponents for the VB1 bases were obtained by minimizing the sum of the Hartree-Fock (HF) and frozen-core singles and doubles configuration interaction (CISD FC) energies of the respective atoms in their ground state. For H and Li, we minimized the sum of the HF and CISD FC energies of the corresponding diatoms (i.e., of H(2) or Li(2)) plus the ground-state energy of the atom. In the case of the VB2 basis sets, the sum that was minimized also included the energies of the positive and negative ions, and for the VB3 bases, the energies of a few lowest lying excited states of the atom. To account for the core correlations, the VBx (x = 1, 2, and 3) basis sets for the Li to Ne series were enlarged by one function per shell. The exponents of these extended (core-valence, CV) basis sets, referred to, respectively, as the CVBx (x = 1, 2, and 3) bases, were optimized by relying on the same criteria as in the case of the VBx (x = 1, 2, and 3) bases, except that the full CISD rather than CISD FC energies were employed. We show that these polarized STO basis sets provide good HF and CI energies for the ground and excited states of the atoms considered, as well as for the corresponding ions.     

Micellar liquid chromatography: suitable technique for screening analysis

The screening capability of micellar liquid chromatography (MLC) is discussed using the reported chromatographic data of several sets of compounds (amino acids, beta-blockers, diuretics, phenethylamines, phenols, polynuclear aromatic hydrocarbons, steroids and sulfonamides) and new results (sulfonamides and steroids). The chromatographic data are treated with an interpretive optimisation resolution procedure to obtain the best separation conditions. Usually, the pH and the concentration of surfactant (sodium dodecyl sulfate, SDS, or cetyltrimethylammonium bromide) for the optimal mobile phase were 2.5-3 and < 0.12 M, respectively. The nature and concentration of organic solvent depended on the polarity of the eluted compounds: a low volume fraction of propanol (approximately 1%, v/v) was useful to separate the amino acids, with log P(o/w) < -1 (where P(o/w) is the octanol-water partition coefficient). A greater concentration of this solvent (approximately 5-7%) was needed for compounds in the range -1 < log P(o/w) < 2, as with the studied diuretics and sulfonamides, and a high concentration of propanol (approximately 15%) or a low concentration of butanol (< 10%) had to be used for less polar compounds with 1 < log P(o/w) < 3, such as the beta-blockers. Pentanol (< 6%) was more suitable for the even less polar compounds with log P(o/w) > 3, such as the steroids. For basic drugs such as the phenethylamines (0 < log P(o/w) < 1.7), eluted with a micellar eluent of anionic SDS, propanol was too weak. A study is also shown for mixtures of sulfonamides (log P(o/w) = -1.2 to 1.7) and steroids (log P(o/w) = 3.0-8.1) eluted from conventional C18 columns with SDS mobile phases containing acetonitrile and 1-pentanol, respectively, which are compared with classical acetonitrile-water and methanol-water mixtures. The results complement a previous study on beta-blockers (log P(o/w) = -0.03 to 2.8) and reveal that MLC is a very competitive technique for the screening of compounds against conventional RPLC, due to its peculiar behaviour with regard to the selectivity and elution strength. The concentration of organic solvent needed to obtain sufficiently low retention times (even for highly hydrophobic steroids with log P(o/w) = 7-8) is also appreciably smaller for MLC, which reduces the environmental impact of the mobile phases.     

Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

Extraction of macro- and microamounts of lanthanides by D2EHPA

The effect of macroconcentration (Ma) lanthanide extraction on the microcomponent (Mi) extraction by D2EHPA was investigated. The investigation corroborated that the macrocomponent suppresses the microcomponent extraction. The extractability of Mi decreases with increasing Ma concentration and with increasing proton lanthanide number in macroconcentrations. Semi-empirical relations were derived describing lanthanide extraction in lanthanide macro- and microconcentrations as a function of the extraction of lanthanide macroconcentrations. Under the conditions discussed, these relations can be used to estimate for any lanthanide the distribution ratios for the lanthanide applied as a macrocomponent and for Eu applied as a microcomponent.     

Kinetic determination of tellurium based on its inhibitory effect on the palladium(II)-catalysed reaction between pyronine G and hypophosphite ion

A kinetic method for the determination of Te based on its inhibitory effect on the PdII-catalysed reaction between pyronine G and H2PO2- is described. The influence of experimental variables on the rate of the process and the potential interfering effect of a large number of ions has been studied. Under the selected experimental conditions: 6 x 10(-5) M pyronine G; 0.6 M H2PO2-; pH 2.6, adjusted with Britton-Robinson buffer; 0.80 microgram ml-1 of PdII; and a temperature of 22 +/- 0.2 degrees C, Te was determined in the concentration range 0.08-0.85 microgram ml-1. The method was applied to the determination of Te in waters and lead concentrates.     

Applications of the dicarbollylcobaltate(III) anion in the water/nitrobenzene extraction system

The fundamental properties of the polyhedral sandwich dicarbollylcobaltate(III) anion {[pi-(3)-1,2-B(9)C(2)H(11)](2)Co(III)}(-) are given, together with results for extraction of alkali-metal, alkaline-earth metal and some other cations (e.g., H(+), Pb(2+), Pd(2+) and Ce(3+)) into nitrobenzene and corresponding analytical applications. Considerable attention is paid to charge-transfer through the water-nitrobenzene interface in the presence of this hydrophobic anion.