A comparison between different techniques for the isolation of rosemary essential oil

Traditional hydrodistillation (HD), supercritical fluid extraction (SFE), organic solvent extraction (SE), and water microwave assisted hydrodistillation (MAHD) techniques were compared and evaluated for their effectiveness in the isolation of rosemary essential oil. The microwave assisted hydrodistillation technique was optimized in terms of both delivered power and time duration. The extracts/distillates were analyzed by GC and GC-MS. Microwave distillation, which exploits the physical action of microwaves on plants, showed a series of advantages over the other approaches: low cost, use of water in sample pre-treatment step, greatly reduced isolation time, and attainment of high quality essential oil distillate. Moreover, the absence of environmental impact of this innovative technique was also emphasized.     

Accelerating water exchange for GdIII chelates by steric compression around the water binding site

The water exchange process was accelerated for nine-coordinate, monohydrated macrocyclic GdIII complexes by inducing steric compression around the water binding site; the increased steric crowding was achieved by replacing an ethylene bridge of DOTA4- by a propylene bridge; in addition to the optimal water exchange rate, the stability of [Gd(TRITA)(H2O)]- is sufficiently high to ensure safe medical use which makes it a potential synthon for the development of high relaxivity, macromolecular MRI contrast agents.     

The effect of the “Inert” support on relative photocatalytic activity in the oxidative decomposition of alcohols on irradiated titanium dioxide composites

Reduced quantum efficiencies for the photocatalytic degradation of cyclohexanol, cyclododecanol, 2-hexanol, and benzyl alcohol are observed on TiO₂ particles included within small pore zeolitic supports suspended in acetonitrile. A modest reduction in photocatalytic activity observed with TiO₂ included within large pore zeolites and pillared clays is attributed to reflective and refractive losses of incident light. No appreciable substrate size selectivity could be observed in this series of supported TiO₂ composites. TS-1, a titanium-containing zeolite with Ti in tetrahedral lattice sites, was photoactive, although ETS-10, a titanium-containing zeolite with Ti in octahedral lattice sites, was less so. The low quantum yield residual photoactivity observed with these alcoholic substrates on unmodified zeolites may derive from surface charge transfer complexation, as suggested by diffuse reflectance absorption measurements.     

Solvent effects on substitution reactions at complexes of the [Fe(CN)5L]3- type in binary aqueous mixtures

Summary The kinetics of replacement of 4,4-bipyridine, (4,4-bipy), and 4-cyanopyridine, (4-CNpy), by cyanide in [Fe(CN)₅-(4,4-bipy)]^3-. at 298 K have been studied in binary aqueous mixtures containing different amounts of t-butanol, methanol, glycerol, ethyleneglycol and sucrose. The plots of logarithms of the limiting rate constantsversus the mole fraction of water are linear over the entire composition range studied, showing the importance of solvation phenomena. A different straight line of log (k_L/s^–1)versus X_H2O is obtained for each mixture, indicating the influence of other solvent parameters on the reaction rate. A multiparameter regression of G _exp with A (acidity vector), B (basicity vector) and G^E is used for both reactions; plots of G _calc versus G _exp are linear with slopes of near unity.     

Synthesis and 1H NMR study of 3,4-di ethyl-1,2,3,3a,4,5-hexahydro-canthinone-6

The racemic mixtures of the two epimers of 3,4-diethyl-l,2,3,3a,4,5-hexahydro-canthinone-6 (3,4-diethyl-2,3,3a,4,5,6-hexahydro-6-oxo-1H-indolo-(3,2,1 ,de) (1,5)naphtyridine) have been prepared. They were separated by crystallization of one of the synthesis intermediates. Identification of the configuration was possible by 1h NMR spectroscopy after running a 2D J-resolved spectrum of the “cis”-isomer.     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

Nuclear magnetic resonance studies of sulfur inversion in bis(cyclopentadienyl)-molybdenum and -tungsten complexes with dithioethers

The metallocene thioether derivatives [Cp₂M(MeSCH₂CH₂SMe)][PF₆]₂ (1, M = MO; 2, M = W), [Cp₂Mo(SCH₂CH₂SMe)][PF₆] (3) and [Cp₂M(SCH₂CH₂S)] (4, M = Mo; 5, M = W) exhibit temperature-dependent fluxional behavior in solution, owing to the pyramidal sulfur inversion process. The activation energies for this process were determined from proton band-shape analysis in the cases of 1 (54.9 ± 2 kJ mol⁻¹), 2 (51.2 ± 4.6 kJ mol⁻¹) and 3 (30.0 ± 3.1 kJ mol⁻¹). Extended Hückel calculations on related model complexes suggest that local inversion at the sulfur atoms, rather that an inversion of the complete S---C---C---S chain, is responsible for the observed fluxional behaviour.     

NMR characterization of new 10-membered-ring macrolactones and dihydrobenzophenazine-5-one, oxidized derivatives of benzo[a]phenazines

Peroxidation of the phenazine of beta-lapachone using m-ClC6H4CO3H-CH2Cl2 furnished a macrolactone with a rigid 10-membered ring, and the corresponding N-oxide, along with a dihydrobenzophenazine-5-one. All of the new compounds were fully characterized by spectroscopic methods, with the unambiguous assignment of the hydrogens and carbon NMR signals for the N-oxide, with the aid of 2-D NMR, mainly COSY, HMQC, HSQC and HMBC. For the other two compounds some signals could not be assigned owing to their own intrinsic features.     

Direct versus resonances mediated F+OH collisions on a new 3A" potential energy surface

A theoretical study of the F(2P) + OH(2Pi) --> HF(1Sigma+) + O(3P) reactive collisions is carried out on a new global potential energy surface (PES) of the ground 3A" adiabatic electronic state. The ab initio calculations are based on multireference configuration interaction calculations, using the aug-cc-pVTZ extended basis sets of Dunning et al. A functional representation of the PES shows no nominal barrier to reaction, contrary to previous results by others. Wave packet and quasiclassical trajectory calculations have been performed for this PES to study the F + OH(v = 0,j) reactive collision. The comparison was performed at fixed and constant values of the total angular momentum from 0 to 110 and relative translational energy up to 0.8 eV. The reaction presents a dynamical barrier, essentially due to the zero-point energy for the bending vibration near the saddle point. This determines two different reaction mechanisms. At energies higher than approximately 0.125 eV the reaction is direct, while below that value it is indirect and mediated by heavy-light-heavy resonances. Such resonances, also found in the simulations of the photodetachment spectrum of the triatomic anion, manifest themselves in the quasiclassical simulations, too, where they are associated to periodic orbits.     

Derivatives of M(η5-C5H5)2 (M = Mo,W) with alkenylpyridines and related ligands

Reactions of ligands 2-vinylpyridine 1, 4-vinylpyridine 2, 2-allylpyridine 3, 1-allylpyrazole 4, acrylonitrile 5 and allylcyanide 6 with the metallocene derivatives [Mo(η⁵-C₅H₅)₂H₃][PF₆] 7, [Mo(η⁵-C₅H₅)₂HI] 8, [W(η⁵-C₅H₅)₂H₃] [PF₆] 9, [Mo(η⁵-C₅H₅)₂H₂] 10, [M(η⁵-C₅H₅)₂Br₂], M = Mo 11, M = W 12 are described. Reaction of 7 with 1, 8 with 1, 3 with 8 and 4 with 8 gave mixtures of metallocyle isomers resulting from coordination of the nitrogen atom to molybdenum followed by internal hydrometallation; reaction of 11 with 1 gave an olefinic π complex; reaction of either 9 or 11 with 1 gave intractable oils; reactions of 8 with 2, 11 with 5, 12 with 5, 11 with 6 and 12 with 6 yielded monosubstituted products in which the ligand is N-coordinated.