Fluorescent-Magnetic Nanostructures Based on Polymer-Quantum Dots Conjugates

Summary: In this study it is presented the synthesis and the characterization of Fluorescent-Magnetic Nanostructures based on polymer-quantum dots conjugates. Polyvinyl alcohol (PVA) was used as the capping-ligand for the preparation of Cd_xMn_1-xS semiconductor nanocrystals via aqueous colloidal chemistry. Different substitution ratios of Cd²⁺ by Mn⁺² ions were investigated aiming at the formation of stable nanoparticles with photo-luminescent and semi-magnetic properties. UV-visible spectroscopy (UV-vis), photoluminescence spectroscopy (PL), Electric Paramagnetic Resonance Spectroscopy (EPR), and transmission electron microscopy (TEM) were used to characterize the formation and the relative stability of Cd_xMn_1-xS nanoparticles. The results have showed the influence of the Mn²⁺partially replacing Cd²⁺ in the optical behavior of the quantum dots (QDs) produced. In addition, the Cd_xMn_1-xS QDs have evidenced luminescent and semi-magnetic properties. Thus, the biocompatible water-soluble polymer was effective as ligand for synthesizing and stabilizing QDs conjugates with properties allowing them to be potentially applied as imaging and labeling probes in the biomedical field.     

Statistical Experimental Design for Obtaining Nanocellulose from Curaua Fiber

Summary: This study focuses on the methodology to obtain nanocellulose from vegetal fibers. An experimental planning was carried out for the treatment of curaua fibers and parameters were estimated, having the concentration of H₂SO₄, hydrolysis time, reaction temperature and time of applied sonication as independent variables for further statistical analysis. According to the estimated parameters, the statistically significant effects were determined for the process of obtaining nanocellulose. With the results obtained from the thermogravimetric analysis (TGA) it was observed that certain conditions led to cellulose with degradation temperatures near or even above that of the untreated cellulose fibers. The crystallinity index (I_C) obtained after fiber treatment (by X-ray diffraction technique) was higher than that of the pure fiber. Treatments with high acid concentrations led to higher IC. After the statistical experimental design, mixtures of polypropylene with fibers prepared after different treatments were performed in a mini-extruder. It was possible to observe a sharp increase in the mechanical properties through the dynamic mechanical thermal analysis (DMTA).     

3D Printing of Poly(3-hydroxybutyrate) Porous Structures Using Selective Laser Sintering

Summary: Poly(3-hydroxybutyrate) (PHB) 3D porous cubes were successfully built with Selective Laser Sintering (SLS), one of the many existing 3D printing technologies. The resulting cubes presented shape and dimensions very close to the corresponding virtual model. Moreover, they were resistant to handling without presenting any visible damage. The PHB powder did not present variation in thermal properties and chemical composition after 32.15 hours of SLS process as observed by proton nuclear resonance (¹H NMR) and differential scanning calorimetry (DSC) analysis, indicating that it can be re-utilized to print additional structures without affecting the reproducibility of the process.     

Preparation and Cytotoxicity of Poly(Methyl Methacrylate) Nanoparticles for Drug Encapsulation

Summary: This work aimed to produce poly(methyl methacrylate) nanoparticles for use in drug encapsulation. The polymer nanoparticles were produced using miniemulsion polymerization technique. Monomer miniemulsion showed moderate stability and polymer average particle size was about 90 nm. PMMA nanoparticles were tested for toxicity in human leukemic cell strain K562 and they did not show any adverse effect on cell viability. Therefore, poly(methyl methacrylate) nanoparticles are suitable to encapsulate antitumor agents.     

苯乙烯/聚氯乙烯接枝膜的热稳定性研究

用自由基悬浮聚合法合成了苯乙烯 /聚氯乙烯接枝膜 ,并对产物热处理 ,然后进行紫外 -可见光谱 ,红外光谱 ,热失重分析。结果表明接枝苯乙烯后的聚氯乙烯膜热稳定性得到了提高。同时 ,讨论了热稳定性机理。     

Absolute configuration of strictosidinic acid

The absolute configuration of strictosidinic acid, (2S,3R,4S)‐3‐ethenyl‐2‐(β‐d ‐glucopyranosyloxy)‐4‐{[(1S)‐2,3,4,9‐tetrahydro‐1H‐pyrido[3,4‐b]indol‐1‐yl]methyl}‐3,4‐dihydro‐2H‐pyran‐5‐carboxylate, was determined from its sodium chloride trihydrate, poly[[diaqua((2S,3R,4S)‐3‐ethenyl‐2‐(β‐d ‐glucopyranosyloxy)‐4‐{[(1S)‐2,3,4,9‐tetrahydro‐1H‐pyrido[3,4‐b]indol‐2‐ium‐1‐yl]methyl}‐3,4‐dihydro‐2H‐pyran‐5‐carboxylate)sodium] chloride monohydrate], {[Na(C₂₆H₃₂N₂O₉)(H₂O)₂]Cl·H₂O}_n. The strictosidinic acid molecule participates in intermolecular hydrogen bonds of the O—H...O and O—H...Cl types. The solid‐state conformation was observed as a zwitterion, based on a charged pyridine N atom and a carboxylate group, the latter mediating the packing through coordination with the sodium cation.     

Can Aromaticity Coexist with Diradical Character? An Ab Initio Valence Bond Study of S2N2 and Related 6π‐Electron Four‐Membered Rings E2N2 and E42+ (E=S,Se, Te)

A series of 6π‐electron 4‐center species, E₂N₂ and E₄²⁺ (E=S, Se, Te) is studied by means of ab initio valence bond methods with the aims of settling some controversies on 1) the diradical character of these molecules and 2) the radical sites, E or N, of the preferred diradical structure. It was found that for all molecules, the cumulated weights of the two possible diradical structures are always important and close to 50 %, making these molecules comparable to ozone in terms of diradical character. While the two diradical structures are degenerate in the E₄²⁺ dications, they have on the contrary strongly unequal weights in the E₂N₂ neutral molecules. In these three molecules, the electronic structure is dominated by one diradical structure, in which the radical sites are the two nitrogen atoms, while the other diradical structure is much less important. The ordering of the various VB structures in terms of their calculated weights is confirmed by the relative energies of individual VB structures. In all cases, the major diradical structure (or both diradical structures when they are degenerate) is (are) the lowest one(s), while the covalent VB structures lie higher in energy. The vertical resonance energies are considerable in S₂N₂ and S₄²⁺, about 80 % of the estimated value for benzene, and diminish as one goes down the periodic table (S→Se→Te). This confirms the aromatic character of these species, as already demonstrated for S₂N₂ on the basis of magnetic criteria. This and the high weights and stabilities of one or both diradical structures in all systems indicates that aromaticity and diradical character do not exclude each other, contrary to what is usually claimed. Furthermore, it is shown that the diradical structures find their place in a collective electron flow responsible for the ring currents in the π system of these species.     

Thermodynamic characterization of the mixture (1-butanol + iso-octane): Densities,viscosities, and isobaric heat capacities at high pressures

The densities at high pressures of 1-butanol and iso-octane were measured in the range (0.1 to 140) MPa at seven different temperatures, from (273.15 to 333.15) K, and their mixtures were measured in the range (0.1 to 50) MPa at four different temperatures, from (273.15 to 333.15) K. The measurements were performed in a high-pressure vibrating tube densimeter. The pressure–volume–temperature behavior of these compounds and their mixtures was evaluated accurately over a wide range of temperatures and pressures. The data were successfully correlated with the empirical Tamman–Tait equation. The experimental data and the correlations were used to study the behavior and the influence of temperature and pressure on the isothermal compressibility and the isobaric thermal expansivity.Also, the isobaric heat capacities were measured over the range (0.1 to 25) MPa at two different temperatures (293.15 and 313.15) K for the pure compounds and their mixtures. The measurements were performed in a high-pressure automated flow calorimeter. The excess molar heat capacities were assessed for the mixture and a positive deviation from the ideality was obtained.     

Fluorene: An extended experimental thermodynamic study

This work reports new experimental thermodynamic results on fluorene. Vapor pressures of both crystalline and liquid phases were measured using a pressure gauge (capacitance diaphragm manometer) and Knudsen effusion methods over a wide temperature range (292.20 to 412.16) K yielding accurate determination of enthalpy and entropy of sublimation and of vaporization. The enthalpy of sublimation was also determined using Calvet microcalorimetry. The enthalpy of fusion was derived from vapor pressure results and from d.s.c. experiments. Static bomb calorimetry was used to determine the enthalpy of combustion of fluorene from which the standard enthalpy of formation in the crystalline phase was calculated. The enthalpy of formation in the gaseous phase was calculated combining the result derived for the crystalline phase with the enthalpy of sublimation.     

Tuning the hemilabile behaviour of a thioether–pyrazole ligand on Pd(II) complexes with diphosphines

The coordination mode of thioether–pyrazole ligand, 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane (bdtp) and 1,8-bis-(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) ligands, in Pd(II) complexes containing a diphosphine ligand is determined by subtle changes in size of the bridge between the two phosphorus atoms. The ¹H NMR and ³¹P{¹H} NMR at variable temperature in acetonitrile solution prove that the hemilabile character of the bdtp ligand depend on the diphosphine ligand. Thus, while in [Pd(bdtp)(dppe)](BF₄)₂ [1](BF₄)₂ the thioether group not participate in the Pd(II) coordination sphere, two isomers with different coordination (P₂N₂ vs P₂NS) are in equilibrium in [Pd(bdtp)(dppp)](BF₄)₂ [2](BF₄)₂ acetonitrile solution. For complexes [Pd(bddo)(dppe)](BF₄)₂ [3](BF₄)₂ and [Pd(bddo)(dppp)](BF₄)₂ [4](BF₄)₂, only the coordination N,N is observed.