The Fermi doublet V2−V3 + V4 of CH3CN as a probe of molecular interactions

The Fermi doublet V₂?V₃ + V₄ of CH₃CN in basic, inert and acidic solvents has been studied by IR and Raman spectroscopy. The values of W, the Fermi coupling coefficient, obtained from IR spectra varies with the nature of the solvent while W evaluated from Raman data remains constant at 12.5 ± 0.5 cm^?1. The similar effects of Bronsted and Lewis acids on the band frequencies and intensities is evidence that the CN group complexes with acids via the N atom “n” electron pair and not the π bond.     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Ab Initio (GIAO) Calculations of Absolute Nuclear Shieldings for Representative Compounds Containing 1(2)H, 6(7)Li, 11B, 13C, 14(15)N, 17O, 19F, 29Si, 31P, 33S,and 35Cl Nuclei

Two kinds of ab initio calculations (B3LYP and HF) using the GIAO approach have been carried out for fifteen H, three Li, three B, eleven C, seven N, nine O, four F, three Si, four P, six S and five Cl containing derivatives. The calculated absolute nuclear shieldings have been compared with experimental absolute values (either measured or estimated from relative chemical shifts) when available or with relative chemical shifts (¹¹B, ³⁵Cl). The correlations range from good to excellent and only three compounds (PN, P₂H₂, SO₂) deviate significantly.     

Chemical behavior of the biradicaloid (HO...ONO) singlet states of peroxynitrous acid. The oxidation of hydrocarbons, sulfides, and selenides

Various high levels of theory have been applied to the characterization of two higher lying biradicaloid metastable singlet states of peroxynitrous acid. A singlet minimum (cis-2) was located that had an elongated O-O distance (2.17 A) and was only 12.2 kcal/mol [UB3LYP/6-311+G(3df,2p)+ZPVE] higher in energy than its ground-state precursor. A trans-metastable singlet (trans-2) was 10.9 kcal/mol higher in energy than ground-state HO-ONO. CASSCF(12,10)/6-311+G(d,p) calculations predict the optimized geometries of these cis- and trans-metastable singlets to be close to those obtained with DFT. Optimization of cis- and trans-2 within the COSMO solvent model suggests that both exist as energy minima in polar media. Both cis- and trans-2 exist as hydrogen bonded complexes with several water molecules. These collective data suggest that solvated forms of cis-2.3H(2)O and trans-2.3H(2)O represent the elusive higher lying biradicaloid minima that were recently (J. Am. Chem. Soc. 2003, 125, 16204) advocated as the metastable forms of peroxynitrous acid (HOONO). The involvement of metastable trans-2 in the gas phase oxidation of methane and isobutane is firmly established to take place on the unrestricted [UB3LYP/6-311+G(d,p)] potential energy surface (PES) with classical activations barriers for the hydrogen abstraction step that are 15.7 and 5.9 kcal/mol lower than the corresponding activation energies for producing products methanol and tert-butyl alcohol formed on the restricted PES. The oxidation of dimethyl sulfide and dimethyl selenide, two-electron oxidations, proceeds by an S(N)2-like attack of the heteroatom lone pair on the O-O bond of ground-state peroxynitrous acid. No involvement of metastable forms of HO-ONO was discernible.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Complexes of divalent nickel and copper with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde

Summary The reactions of divalent nickel and copper salts with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde, L, yield complexes of general formulae [CuL₂X₂] (X=Cl, Br, or ClO₄), [CuL(SO₄)], [CuL(SO₄)] · 4H₂O, and NiLX₂ (X=Cl, Br, or NCS).All the complexes have been characterized by elemental analyses, magnetic measurements, e.s.r. electronic and i.r. spectral studies. The results show that the Schiff base acts as bidentate ligand through the pyridine-like imine nitrogen of imidazole ring and the azomethine nitrogen. Tentative structures of the complexes are suggested.     

A mew method of synthesis of 1,2,3,4-telrahydro-5H-5-oxo-1,4-benzodiazepines

A new one-step facile method for the synthesis of 1,12,3,4-tetrahydro5H-5-oxo-1,4-benzo-diuzepines is described. The method involves the addition of methyl anlhranilates to elhyl-enimine followed by intramolecular cyclizalion of the resulting intermediate compounds. Another attempted method starting from β-anilinoethylisocyanales is also described.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.