The influence of cosolvent polarity on the flow properties of hydroalcoholic gels: empirical models

The aim of this study was to investigate the influence of cosolvent polarity on the rheological flow properties of aqueous and hydroalcoholic gels obtained from the Carbopol Ultrez 10 base and used for topical applications. Specifically, we have examined the effect of pH (range 4.0--7.0) on the consistency and flow properties of dispersed systems in water and mixtures--15 : 85% v/v of methanol : water, ethanol : water, n-propanol : water and n-butanol : water--at a constant polymer concentration of 0.3% w/w. The gels, which had decreasing polarity values in the jellifying medium, showed qualitatively similar flow behavior, characteristic of pseudoplastic systems, and all of the flow curves were adjusted to the Ostwald model. Sigmoidal dose response functions were calculated to describe the flow and consistency indexes as a function of pH. As a result, the influence of alcohol polarity on the polymer network has been assessed meaningfully using the empirical parameters obtained: maximum consistency index value (k(max)), pH value required for 50% development of polymer network (pH(50)), and asymptotic flow index value (n(min)) for the fully structured gels.     

High stability amperometric biosensor based on enzyme entrapment in microgels

The preparation and characterization of an amperometric glucose biosensor based on the entrapment of glucose oxidase (GOx) in a polyacrylamide microgel is described. This study proves that polyacrylamide microgels provide an excellent matrix for GOx immobilization that can be used as a biological material in amperometric biosensors. The interference produced by ascorbic and uric acid has been eliminated by including acrylic acid in the polymeric matrix. With this modification, we obtain an adequate device for glucose determination in complex samples such as blood and serum. The study of the temperature effect in the response of biosensors indicates that swelling of the microgels directly influences the enzymatic activity. Thus, the behaviour of the enzyme in the swollen microgels is similar to the enzyme in solution, but the enzyme's activation energy increases when the water content in the microgels decreases. One important property of these biosensors is their remarkable stability. After 4 months of its manufacture, there is no loss in the initial response. Furthermore, the enzymatic activity of freeze-dried microgels containing enzyme remains unaltered for at least 18 months.     

Synthesis of potential antifilarial agents 2 . methyl 2-substituted purine 8-carbamates and related compounds

A series of methyl 2-substituted purine 8-carbamates was prepared and evaluated for antifilarial activity. These purines were synthesized as aza congeners of benzimidazole carbamates which have shown significant anthelmintic activity to determine the effect that this modification might have on anthelmintic activity. The compounds were tested against the filarial infection, B. pahangi, in jirds. None of the compounds prepared in this study demonstrated antifilarial activity.     

Regioselective palladium-catalyzed alkylation of allylic halides with benzylic grignard reagents. Two-step synthesis of abietane terpenes and tetracyclic polyprenoid compounds

A highly regioselective palladium-catalyzed alpha-alkylation of allylic bromides 1a,c-e and chloride 1b with substituted and unsubstituted benzylic Grignard reagents is reported. The resulting all-trans polyenehomobenzene derivatives were obtained in excellent yields and regioselectivity. These products were easily converted to abietane-type diterpenes (10-12) and tetracyclic polyprenoid compounds (13, 14) through a Lewis acid-promoted cascade polyene cyclization reaction.     

Solubility and first hidrolysis constants of europium at different ionic strength and 303 K

The solubility of europium at 0.02M, 0.1M and 0.7M NaClO₄ ionic strength solutions was determined by a radiometric method and pEu_s-pC_H diagrams were obtained. Hydrolysis constants were also determined at the same ionic strengths by pH titration and the values found were log *₁ = -7.68±0.11, -8.07±0.10 and -8.20±0.11. The log K _sp values were -23.5±0.2, -22.7±0.2 and -21.9±0.2 for 0.02M, 0.1M and 0.7M NaClO₄ ionic strengths, respectively, at 303 K under CO₂-free conditions and the extrapolated value at zero ionic strength was log K _sp ⁰ = -24.15. The working pC_H ranges for the calculation of the hydrolysis constants were selected from the pEu_s-pC_H diagrams in the region where precipitation of europium oxide or hydroxide was less than 20%. Europium removal from aqueous solutions with zeolites was explored.     

Qualitative and quantitative sensitivity in flame photometry

Concepts of sensitivity in flame photometry are discussed. A distinction is made between sensitivity itself, concentration limits and dilution limits applied to qualitative and quantitative analysis by flame photometry. Sensitivity values, as well as the concentration limits, are considered from two different aspects: as a function of the slope of calibration curves-percentual values-and as a function of fluctutions-fluctuational values. The concepts are applied to the two main branches of flame photometry, emission and absorption.     

Elucidation of the pore structure of SBA-2 using Monte Carlo simulation to interpret experimental data for the adsorption of light hydrocarbons

We have measured the adsorption of methane and ethane to high pressure on SBA-2, a structured mesoporous silica composed of spheres connected by narrow channels. The experimental data were analyzed by carrying out Monte Carlo simulations of adsorption in pore structure models of different complexity and then adjusting the parameters of the models to match the Monte Carlo results to the experimental data. We found that a model based on single-sized spherical cavities was inadequate and that it is necessary to explicitly account for the interconnecting channels. Further, we found that despite the basic regularity of the SBA-2 structure, it is necessary to allow for a distribution of the sizes of both the cavities and the channels. These size distributions were obtained by fitting the parameters of the model to the experimental adsorption data, revealing detailed structural information not previously known for this material. The channels were found to be 5-15 A in diameter, while the cavities were 40-50 A in diameter. There is some evidence that the distribution of channel sizes leads to a percolation effect whereby the pore structure is not equally accessible to all adsorptives.     

Facilitated transport of Hg(II) through novel activated composite membranes

The results presented in this work deal with the prime application of activated composite membranes (ACMs) for the transport of Hg(II) ions in a continuous extraction–re-extraction system using di-(2-ethylhexyl)dithiophosphoric acid (DTPA) as carrier. The effects of variables such as the pH, the nature of the acid and the concentration of the casting solutions on the transport of Hg(II) are also investigated. When the ACM was prepared with a 0.5 M DTPA solution and when the feed solution contained 2.5×10^–4 M Hg(II) in 0.1 M HCl, the amount of mercury extracted was greater than 76%. The re-extracted mercury was subsequently recovered by means of a stripping phase comprising 0.3 M thiourea solution in 2 M H₂SO₄, yielding 54% of the initial amount of mercury after transport had taken place for 180 min.     

Vibrational study of the metal-adsorbate interaction of phenylacetic acid and alpha-phenylglycine on silver surfaces

Raman and SERS spectra of phenylacetic acid and alpha-phenylglycine on silver sols have been recorded at several concentrations and pH values. The alpha-phenylglycine has been also studied in D(2)O. The respective vibrational assignments have been proposed and the analysis of the SERS spectra has made it possible to conclude that phenylacetic acid links to the metal through its carboxylate group only, while alpha-phenylglycine links also through its amino group. In both cases the aromatic ring seems to be almost perpendicular to the metal surface. On the other hand, the contribution of the charge transfer (CT) mechanism to the enhancement of the SERS spectra has been calculated as well and it is found to be very important in both molecules. The band most enhanced by this mechanism is that of vibration 8a, mainly in alpha-phenylglycine.     

A simple and versatile method for the synthesis of acetals from aldehydes and ketones using bismuth triflate

Acetals are obtained in good yields by treatment of aldehydes and ketones with trialkyl orthoformate and the corresponding alcohol in the presence of 0.1 mol % Bi(OTf)3.4H2O. A simple procedure for the formation of acetals of diaryl ketones has also been developed. The conversion of carbonyl compounds to the corresponding 1,3-dioxolane using ethylene glycol is also catalyzed by Bi(OTf)3.4H2O (1 mol %). Two methods, both of which avoid the use of benzene, have been developed.