Pressurized liquid extraction-assisted mussel cytosol preparation for the determination of metals bound to metallothionein-like proteins

The possibilities of pressurized liquid extraction (PLE) have been novelty tested to assist the cytosol preparation from wet mussel soft tissue before the determination of metals bound to metallothionein-like proteins (MLPs). Results obtained after PLE were compared with those obtained after a classical blending procedure for mussel cytosolic preparation. Isoforms MLP-1 (retention time of 4.1 min) and MLP-2 (retention time of 7.4 min) were separated by anion exchange high-performance liquid chromatography (HPLC) and the concentrations of Ba, Cu, Mn, Sr and Zn bound to MLP isoforms were directly measured by inductively coupled plasma-atomic emission spectrometry (ICP-OES) as a multi-element detector. The optimized PLE-assisted mussel cytosol preparation has consisted of one extraction cycle at room temperature and 1500 psi for 2 min. Since separation between the solid mussel residue and the extract (cytosol) is performed by the PLE system, the cytosol preparation method is faster than conventional cytosol preparation methods by cutting/blending using Ultraturrax or Stomacher devices.     

Dehydrogenation of ethylbenzene to styrene using Pt, Mo, and Pt-Mo catalysts supported on clay nanocomposites

A synthetic clay (TS-1) was modified with a nonionic surfactant (IGEPAL CO-720) and magnesium oxide. The resulting solid was used as a support of Pt, Mo, and Pt-Mo catalysts. The catalysts were prepared by wet impregnation with aqueous solutions of H(2)PtCl(6)6H(2)O and (NH(4))(6)-Mo(7)O(24)4H(2)O. In both monometallic and bimetallic catalysts, the molybdenum content was 3 wt% and the platinum content was 0.5 or 1 wt%. The surface area of the starting material was 454 m(2)/g and after the modification treatment with IGEPAL it increased up to 649 m(2)/g, while platinum and molybdenum catalysts showed surface areas between 495 and 550 m(2)/g. The reduction profiles showed different Pt and Mo species and the existence of metal-support interactions. The reduced catalysts were more active than those in the unreduced form. The most active catalysts for the ethylbenzene dehydrogenation were those of monometallic Pt (0.5 and 1 wt%) with a maximum styrene conversion around 50%. The presence of Mo species masked Pt atoms and reduced the activity.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.     

1,2-Dichlorobenzene affects the formation of the phosphoenzyme stage during the catalytic cycle of the Ca<Superscript>2+</Superscript>-ATPase from sarcoplasmic reticulum

Background

1,2-Dichlorobenzene (1,2-DCB) is a benzene-derived molecule with two Cl atoms that is commonly utilized in the synthesis of pesticides. 1,2-DCB can be absorbed by living creatures and its effects on naturally-occurring enzymatic systems, including the effects on Ca²⁺-ATPases, have been poorly studied. Therefore, we aimed to study the effect of 1,2-DCB on the Ca²⁺-ATPase from sarcoplasmic reticulum (SERCA), a critical regulator of intracellular Ca²⁺ concentration.

Results

Concentrations of 0.05–0.2 mM of 1,2-DCB were able to stimulate the hydrolytic activity of SERCA in a medium-containing Ca²⁺-ionophore. At higher concentrations (0.25–0.75 mM), 1,2-DCB inhibited the ATP hydrolysis to ~80 %. Moreover, ATP hydrolysis and Ca²⁺ uptake in a medium supported by K-oxalate showed that starting at 0.05 mM,1,2-DCB was able to uncouple the ratio of hydrolysis/Ca²⁺ transported. The effect of this compound on the integrity of the SR membrane loaded with Ca²⁺ remained unaffected. Finally, the analysis of phosphorylation of SERCA by [γ-³²P]ATP, starting under different conditions at 0° or 25 °C showed a reduction in the phosphoenzyme levels by 1,2-DCB, mostly at 0 °C.

Conclusions

The temperature-dependent decreased levels of phosphoenzyme by 1,2-DCB could be due to the acceleration of the dephosphorylation mechanism – E₂P?·?Ca₂ state to E₂ and P_i, which explains the uncoupling of the ATP hydrolysis from the Ca²⁺ transport.

     

NMR Structure of a Triangulenium‐Based Long‐Lived Fluorescence Probe Bound to a G‐Quadruplex

An NMR structural study of the interaction between a small‐molecule optical probe (DAOTA‐M2) and a G‐quadruplex from the promoter region of the c‐myc oncogene revealed that they interact at 1:2 binding stoichiometry. NMR‐restrained structural calculations show that binding of DAOTA‐M2 occurs mainly through π–π stacking between the polyaromatic core of the ligand and guanine residues of the outer G‐quartets. Interestingly, the binding affinities of DAOTA‐M2 differ by a factor of two for the outer G‐quartets of the unimolecular parallel G‐quadruplex under study. Unrestrained MD calculations indicate that DAOTA‐M2 displays significant dynamic behavior when stacked on a G‐quartet plane. These studies provide molecular guidelines for the design of triangulenium derivatives that can be used as optical probes for G‐quadruplexes.     

Extending the Gibbs tangent plane semicontinuous mixtures

The computation of phase equilibrium for semicontinuous mixtures results in a set of algebraic-functional equations which are commonly solved using the pseudocomponent approach or reducing the order of the functional equations to a set of algebraic equations by means of a Petrov–Galerkin approach. Both approaches can be taken as particular cases of the method of weighed residuals. In order to perform stability analysis of phase equilibrium, the classical tangent plane criterion algorithms can be used as the first approach. There is a lack of functional formulation for the stability criterion in the literature. In some special cases, such as mixtures containing continuous families of heavy-components, a new formulation of the tangent plane criterion is required. In the present work, functional extensions of the Gibbs tangent plane criterion are described. The use of the proposed criteria was exemplified by calculating solid–liquid phase equilibrium of a crude oil containing asphaltenes on titration with a precipitating agent, n-pentane.     

Fast production of microfluidic devices by CO2 laser engraving of wax‐coated glass slides

Glass is one of the most convenient materials for the development of microfluidic devices. However, most fabrication protocols require long processing times and expensive facilities. As a convenient alternative, polymeric materials have been extensively used due their lower cost and versatility. Although CO₂ laser ablation has been used for fast prototyping on polymeric materials, it cannot be applied to glass devices because the local heating causes thermal stress and results in extensive cracking. A few papers have shown the ablation of channels or thin holes (used as reservoirs) on glass but the process is still far away from yielding functional glass microfluidic devices. To address these shortcomings, this communication describes a simple method to engrave glass‐based capillary electrophoresis devices using standard (1 mm‐thick) microscope glass slides. The process uses a sacrificial layer of wax as heat sink and enables the development of both channels (with semicircular shape) and pass‐through reservoirs. Although microscope images showed some small cracks around the channels (that became irrelevant after sealing the engraved glass layer to PDMS) the proposed strategy is a leap forward in the application of the technology to glass. In order to demonstrate the capabilities of the approach, the separation of dopamine, catechol and uric acid was accomplished in less than 100 s.     

Experimental and Kinetic Modeling Study of C2H2 Oxidation at High Pressure

A detailed chemical kinetic model for oxidation of acetylene at intermediate temperatures and high pressure has been developed and evaluated experimentally. The rate coefficients for the reactions of C₂H₂ with HO₂ and O₂ were investigated, based on the recent analysis of the potential energy diagram for C₂H₃ + O₂ by Goldsmith et al. and on new ab initio calculations, respectively. The C₂H₂ + HO₂ reaction involves nine pressure‐ and temperature‐dependent product channels, with formation of triplet CHCHO being dominant under most conditions. The barrier to reaction for C₂H₂ + O₂ was found to be more than 50 kcal mol^?1 and predictions of the initiation temperature were not sensitive to this reaction. Experiments were conducted with C₂H₂/O₂ mixtures highly diluted in N₂ in a high‐pressure flow reactor at 600–900 K and 60 bar, varying the reaction stoichiometry from very lean to fuel‐rich conditions. Model predictions were generally in satisfactory agreement with the experimental data. Under the investigated conditions, the oxidation pathways for C₂H₂ are more complex than those prevailing at higher temperatures and lower pressures. Acetylene is mostly consumed by recombination with H to form vinyl (reducing conditions) or with OH to form a CHCHOH adduct (stoichiometric to lean conditions). Both C₂H₃ and CHCHOH then react primarily with O₂. The CHCHOH + O₂ reaction leads to formation of significant amounts of glyoxal (OCHCHO) and formic acid (HOCHO), and the oxidation chemistry of these intermediates is important for the overall reaction.     

Depurated inversion method for orbital‐specific exchange potentials

This work presents exchange potentials for specific orbitals calculated by inverting Hartree–Fock wavefunctions. This was achieved by using a Depurated Inversion Method. The basic idea of the method relies on the substitution of Hartree–Fock orbitals and eigenvalues into the Kohn–Sham equation. Through inversion, the corresponding effective potentials were obtained. Further treatment of the inverted potential should be carried on. The depuration is a careful optimization which eliminates the poles and also ensures the fullfilment of the appropriate boundary conditions. The procedure developed here is not restricted to the ground state or to a nodeless orbital and is applicable to all kinds of atoms. As an example, exchange potentials for noble gases and term‐dependent orbitals of the lower configuration of Nitrogen are calculated. The method allows to reproduce the input energies and wavefunctions with a remarkable degree of accuracy.     

Enhancing the Photocatalytic Activity of Sr4Al14O25: Eu2+, Dy3+ Persistent Phosphors by Codoping with Bi3+ Ions

The photocatalytic activity of Bismuth‐codoped Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺ persistent phosphors is studied by monitoring the degradation of the blue methylene dye UV light irradiation. Powder phosphors are obtained by a combustion synthesis method and a postannealing process in reductive atmosphere. The XRD patterns show a single orthorhombic phase Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺, Bi³⁺ phosphors even at high Bismuth dopant concentrations of 12 mol%, suggesting that Bi ions are well incorporated into the host lattice. SEM micrographs show irregular micrograins with sizes in the range of 0.5–20 μm. The samples present an intense greenish‐blue fluorescence and persistent emissions at 495 nm, attributed to the 5d–4f allowed transitions of Eu²⁺. The fluorescence decreases as Bi concentration increases; that suggest bismuth‐induced traps formation that in turn quench the luminescence. The photocatalytic evaluation of the powders was studied under both 365 nm UV and solar irradiations. Sample with 12 mol% of Bi presented the best MB degradation activity; 310 min of solar irradiation allow 100% MB degradation, whereas only 62.49% MB degradation is achieved under UV irradiation. Our results suggest that codoping the persistent phosphors with Bi³⁺ can be an alternative to enhance their photocatalytic activity.