Dielectric relaxation in single crystal NH4H2PO4 in the high-temperature regime

The dispersion curves of the dielectric response in single crystal NH₄H₂PO₄ were obtained in the radio frequency range and below the high-temperature transition at T_p−160 °C. The results reveal dielectric relaxation at low frequency, which is about 10⁵ Hz at 70 °C, and it shifts to higher frequencies (∼3×10⁶ Hz) as the temperature increases. The relaxation frequency was determined from the peak obtained in the imaginary part of the permittivity as well as from the derivative of the real part of the permittivity. The activation energy E_a=0.55 eV, obtained from the relaxation frequency is very close to that derived from the dc conductivity. We suggest that this dielectric relaxation could be due to the proton jump and phosphate reorientation that cause distortion and change the local lattice polarizability inducing dipoles like      

Birefringent filter with amplitude beats

In this work, we show a very simple birefringent filter useful to modulate a broadband light spectrum. We first show the generation of various oscillating spectra using two identical multiple-order waveplates. In particular a sinusoidal broadband spectrum with a rapid oscillation is obtained. This spectrum is amplitude modulated by adding another waveplate to the system. This waveplate has a small phase shift, and with the proper orientation generates amplitude beats on the broadband spectrum. Finally, we show how this system can be voltage controlled by means of a ferroelectric liquid crystal modulator. We experimentally demonstrate this behavior with the aid of a portable spectrophotometer, and we provide a theoretical explanation on the basis of the Jones matrix formalism.     

Modelling of optical absorption of silver NP’s produced by UV radiation embedded in mesostructured silica films

Hexagonal mesostructured films containing silver ions were obtained by sol–gel method. Brij 58 was used to produce channels into the film, which house these ions. The films were exposure to UV radiation to produced silver metallic nanoparticles. The presence of the metallic nanoparticles was determined by infrared spectroscopy and optical absorption. Besides, these nanoparticles and core–shell structures of silver–silver oxide nanoparticles were identified by high-resolution transmission electronic microscopy. From these measurements, the obtained size range for silver nanoparticles was 6.1 nm. The absorption spectrum located at 440 nm was modelled and well fitted with the Gans theory considering refractive index higher than the one coming from host matrix. This index is explained because the silver oxide shell modifies the local surrounding medium of the metallic nanoparticles.     

Three-parameter Lorentz-violating texture for neutrino mixing

A three-parameter model of neutrino oscillations based on a simple Lorentz- and CPT-violating texture is presented. The model is consistent with established data and naturally generates low-energy and neutrino–antineutrino anomalies of the MiniBooNE type. A one-parameter extension incorporates the MINOS anomaly, while a simple texture enhancement accommodates the LSND signal.     

Mineralogical analysis of auriferous ores from the El Diamante mine, Colombia

X-ray diffraction (XRD), Mössbauer spectrometry (MS), secondary ions mass spectroscopy (SIMS) and laser-ablation microprobe–inductively coupled plasma–mass spectrometry (LAM–ICP–MS) were used to study mineral samples of Colombian auriferous ores collected from the “El Diamante” mine, located in the municipality of Guachavez-Nariño, in Colombia. The samples were prepared as polished thin sections and polished sections. From XRD data, quartz, sphalerite and pyrite were detected and their respective cell parameters were estimated. From MS analyses, pyrite, arsenopyrite and chalcopyrite were identified; their respective hyperfine parameters and respective texture were deduced. Multiple regions of approximately 200 × 200 μm in each sample were analyzed with SIMS; the occurrence of “invisible gold” associated mainly with pyrite and secondarily with arsenopyrite could thus be assigned. It was also found that pyrite is of the arsenious type. Spots from 30 to 40 μm in diameter were analyzed with LAM–ICP–MS for pyrite, arsenopyrite and sphalerite; Au is “homogeneously” distributed inside the structure of the arsenious pyrite and the arsenopyrite (not as inclusions); the chemical composition indicates similarities of this “invisible gold”, forming a solid solution with arsenious pyrite and arsenopyrite. One hundred nineteen and 62 ppm of ‘invisible gold’ was quantified in 21 spots analyzed on pyrite and in 14 spots on arsenopyrite, respectively.     

Improvement of the dynamic range of a fiber specklegram sensor based on volume speckle recording in photorefractive materials

In this work, the improvement of the dynamic range of a micro displacement sensor based on fiber specklegrams holographically stored in a photorefractive BSO (Bi₁₂SiO₂₀) crystal is reported. In our experimental setup, a plastic optical fiber (POF) was used to generate a subjective speckle pattern that was recorded in the crystal using a two-wave mixing arrangement. The speckle size was controlled by modifying the diameter of a pupil aperture adjacent to a lens producing the image of the speckle. Fringe patterns were obtained at the output of the system by producing micro displacements of the fiber output end. An increase in the visibility of the fringe patterns was appreciated when the pupil aperture diameter decreased even without controlling the average modulation of the intensity of the light pattern, i.e. when the speckle length increased and the average light modulation simultaneously decreased. This behavior allowed recovering the autocorrelation functions of fringe patterns associated with displacements that initially led to decorrelation, and therefore, significantly to improve the dynamic range of the metrological system. To the best of our knowledge this is the first report about the influence of speckle size on the dynamic range of fiber specklegrams sensors recorded on photorefractive materials.     

Free-space fluorescence molecular tomography utilizing 360 degrees geometry projections

Fluorescence tomography of diffuse media can yield optimal three-dimensional imaging when multiple projections over 360 degrees geometries are captured, compared with limited projection angle systems such as implementations in the slab geometry. We demonstrate how it is possible to perform noncontact, 360 degrees projection fluorescence tomography of mice using CCD-camera-based detection in free space, i.e., in the absence of matching fluids. This approach achieves high spatial sampling of photons propagating through tissue and yields a superior information content data set compared with fiber-based 360 degrees implementations. Reconstruction feasibility using 36 projections in 10 degrees steps is demonstrated in mice.     

Anisotropic Local Hardy Spaces

In this paper we introduce and study the anisotropic local Hardy spaces h_A^p(\mathbbRⁿ)h_{A}^{p}(\mathbb{R}^{n}) 0<p≤1, associated with the expansive matrix A. We obtain an atomic characterization of the distributions in h_A^p(\mathbbRⁿ)h_{A}^{p}(\mathbb{R}^{n}). Also we describe the dual spaces of our local Hardy anisotropic spaces as anisotropic Campanato type spaces.     

The extended loop group: An infinite dimensional manifold associated with the loop space

A set of coordinates in the non-parametric loop-space is introduced. We show that these coordinates transform under infinite dimensional linear representations of the diffeomorphism group. An extension of the group of loops in terms of these objects is proposed. The enlarged group behaves locally as an infinite dimensional Lie group. Ordinary loops form a subgroup of this group. The algebraic properties of this new mathematical structure are analyzed in detail. Applications of the formalism to field theory, quantum gravity and knot theory are considered.