Selective reagent ionisation‐time of flight‐mass spectrometry: a rapid technology for the novel analysis of blends of new psychoactive substances

In this study we demonstrate the potential of selective reagent ionisation‐time of flight‐mass spectrometry for the rapid and selective identification of a popular new psychoactive substance blend called ‘synthacaine’, a mixture that is supposed to imitate the sensory and intoxicating effects of cocaine. Reactions with H₃O⁺ result in protonated parent molecules which can be tentatively assigned to benzocaine and methiopropamine. However, by comparing the product ion branching ratios obtained at two reduced electric field values (90 and 170 Td) for two reagent ions (H₃O⁺ and NO⁺) to those of the pure chemicals, we show that identification is possible with a much higher level of confidence then when relying solely on the m/z of protonated parent molecules. A rapid and highly selective analytical identification of the constituents of a recreational drug is particularly crucial to medical personnel for the prompt medical treatment of overdoses, toxic effects or allergic reactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluoridhaltige Gäste in Alumosilicaten: Tetrafluoroborate in dem Sodalithen Na8Al6Si6O24(BF4)2

In the course of investigations on optical properties resulting from the interaction of fluorides with alumosilicate host materials and rare earth guests, a well defined BF₄^– ion wasfound to be incorporated within the sodalite of composition Na₈Al₆Si₆O₂₄(BF₄)₂. The resulting cubic molecular structure, which was determined by Rietveld methods (space group P4 n, a = 906.91 pm, wRp = 0.045, Rp = 0.027), contains one anion in each sodalite cage and is, contrarily to expectations, thermally stable. NMR spectroscopic investigations indicated a fast rotatory motion of the BF₄^– tetrahedra at room temperature and agreed with the tetrahedral BF₄^– ions found in IR and Raman spectra. Preliminary attempts to obtain a luminescent material by incorporation of Eu³⁺ through aqueous ion exchange only yielded low rare earth concentrations, giving rise to characteristic red emission lines at 581 nm (⁵D₀ → ⁷F₁) and 615 nm (⁵D₀ → ⁷F₂) in a 1:2 intensity ratio. The material unexpectedly exhibited a strong broad band emission at 520 nm after calcination under Ar, which is attributed to the formation of an Eu²⁺ species. Further calcination under air partially reestablished the Eu³⁺ emission.     

Identification of acidic phosphorus-containing ligands involved in the surface chemistry of CdSe nanoparticles prepared in tri-N-octylphosphine oxide solvents

The surface ligand composition of CdSe nanoparticles prepared using technical grade tri-n-octylphosphine oxide (TOPO) was investigated using a nucleophilic ligand displacement methodology and (31)P {(1)H} NMR spectroscopy. 4-(N,N-Dimethylamino)pyridine (DMAP) and benzyltrimethylammonium propionate were added to tetrahydrofuran solutions of CdSe nanoparticles prepared in technical grade TOPO. DMAP was shown to be a sufficiently strong nucleophile to displace the more weakly coordinating ligands, TOPO, TOPSe, di-n-octylphosphinate, and n-octylphosphonate (OPA). Benzyltrimethylammonium propionate was shown to be a stronger nucleophile than DMAP in that it could displace all the aforementioned surface-bound ligands as well as a previously unidentified surface-bound phosphorus species. Independent synthesis and (31)P {(1)H} NMR spectral matching confirmed that the new species was P,P'-(di-n-octyl) dihydrogen pyrophosphonic acid (PPA). The PPA was shown to form during the nanoparticle synthesis via the dehydrative condensation of OPA. CdSe nanoparticle syntheses were performed using pure TOPO and added OPA, and subsequent displacement experiments showed that OPA and PPA were the predominant surface-bound ligands. CdSe nanoparticle syntheses were performed using pure TOPO and added PPA, and subsequent displacement experiments showed that PPA was the predominant surface-bound ligand. PPA was also shown to have the greatest affinity for the nanoparticle surface of all the ligands investigated. Thus, a model for the surface ligand composition could be developed for nanoparticles prepared using technical grade TOPO or other high-boiling solvents with added acidic phosphorus compounds.     

Ditungsten Siloxide Hydrides, [(silox)(2)WH(n)()](2) (n = 1, 2; silox = (t)BuSiO), and Related Complexes

The addition of 4.0 equiv of Na(silox) to Na[W(2)Cl(7)(THF)(5)] afforded (silox)(2)ClW&tbd1;WCl(silox)(2) (1, 65%). Treatment of 1 with 2.0 equiv of MeMgBr in Et(2)O provided (silox)(2)MeW&tbd1;WMe(silox)(2) (2, 81%). In the presence of 1 atm of H(2), reduction of 1 with 2.0 equiv of Na/Hg in DME provided (silox)(2)HW&tbd1;WH(silox)(2) (3, 70%), characterized by a hydride resonance at delta 19.69 (J(WH) = 325 Hz, (1)H NMR). Exposure of 2 to 1 atm of H(2) yielded 3 and CH(4) via (silox)(2)HW&tbd1;WMe(silox)(2) (4); use of D(2) led to [(silox)(2)WD](2) (3-d(2)). Exposure of 3 to ethylene ( approximately 1 atm, 25 degrees C) in hexanes generated (silox)(2)EtW&tbd1;WEt(silox)(2) (5), but solutions of 5 reverted to 3 and free C(2)H(4) upon standing. NMR spectral data are consistent with a sterically locked, gauche, C(2) symmetry for 1-5. Thermolysis of 3 at 100 degrees C (4 h) resulted in partial conversion to (silox)(2)HW&tbd1;W(OSi(t)Bu(2)CMe(2)CH(2))(silox) (6a, approximately 60%) and free H(2), while extended thermolysis with degassing (5 d, 70 degrees C) produced a second cyclometalated rotational isomer, 6b (6a:6b approximately 3:1). When left at 25 degrees C (4 h) in sealed NMR tubes, 6 and free H(2) regenerated 3. Reduction of 1 with 2.0 equiv of Na/Hg in DME also afforded 6a (25%). When 3 was exposed to approximately 3 atm of H(2), equilibrium amounts of [(silox)(2)WH(2)](2) (7) were observed by (1)H NMR spectroscopy (3 + H(2) right harpoon over left harpoon 7; 25.9-88.7 degrees C, DeltaH = -9.6(4) kcal/mol, DeltaS = -21(2) eu). Benzene solutions of 3 and 1-3 atm of D(2) revealed incorporation of deuterium into the silox ligands, presumably via intermediate 6. In sealed tubes containing [(silox)(2)WCl](2) (1) and dihydrogen (1-3 atm), (1)H NMR spectral evidence for [(silox)(2)WCl](2)(&mgr;-H)(2) (8) was obtained, suggesting that formation of 3 from 1 proceeded via reduction of 8. Alternatively, 3 may be formed from direct reduction of 1 to give [(silox)(2)W](2) (9), followed by H(2) addition. Hydride chemical shifts for 7 are temperature dependent, varying from delta 1.39 (-70 degrees C, toluene-d(8)), to delta 3.68 (90 degrees C). (29)Si{(1)H} NMR spectra revealed a similar temperature dependence of the silox (delta 12.43, -60 degrees C, to delta 13.64, 45 degrees C) resonances. These effects may arise from thermal population of a low-lying, deltadelta, paramagnetic excited state of D(2)(d)() [(silox)(2)W](2)(&mgr;-H)(4) (DeltaE approximately 2.1 kcal/mol, chi(7a) approximately 0.03), an explanation favored over thermal equilibration with an energetically similar but structurally distinct isomer (e.g., [(silox)(2)WH(2)](2)(&mgr;-H)(2), DeltaG degrees approximately 0.69 kcal/mol, chi(7b) approximately 0.25) on the basis of spectral arguments. Extended Hückel and ab initio molecular orbital calculations on model complexes [(H(3)SiO)(2)W](2)(&mgr;-H)(4) (staggered bridged 7a', EHMO), [(H(3)SiO)(2)WH(2)](2) (all-terminal 7b', EHMO), [(H(3)SiO)(2)W](2) (9', EHMO), (HO)(4)W(2)(H(4)) (staggered-bridged 7", ab initio), and (HO)(4)W(2)(H(4)) (bent-terminal 7, ab initio) generally support the explanation of a thermally accessible excited state and assign 7 a geometry intermediate between the all-terminal and staggered-bridged forms.     

Gas collection efficiency of annular denuders: A spreadsheet-based calculator

Denuders are widely used for atmospheric analysis. Annular denuders are especially well-suited for preconcentration of trace gases compared to simpler single tube designs. While traditionally coated annular denuders have both bounding surfaces that behave as sinks, annular denuders/membrane-based scrubbers with the same basic geometric design and with only one of the annular surfaces functioning as sink (e.g., a membrane tube whose outer surface behaves as a sink disposed within an inert jacket tube) have become common. However, the gas collection efficiency of such devices cannot be expressed as a simple equation with fixed constants and there is no presently available tool to a priori determine the denuder performance or to design denuders with specific removal efficiencies at specific sampling rates. This paper presents a simple to use “spreadsheet calculator” for concentric annular denuders of any dimension based on known solutions to analogous heat transfer problems. The results from the present spreadsheet calculator are compared with results from a commercial computational fluid dynamics package (Fluent™; this takes significant expertise and development effort to run)—the two approaches produce essentially the same results. The present spreadsheet calculator can be used easily and simply without training and will be a useful tool for denuder users and designers.     

Local-global principles for representations of quadratic forms

We prove a local-global principle for the problem of representations of quadratic forms by quadratic forms over ℤ, in codimension ≥5. The proof uses the ergodic theory of p-adic groups, together with a fairly general observation on the structure of orbits of an arithmetic group acting on integral points of a variety.     

Permeability of pure and mixed gases in silicone rubber at elevated pressures

The transport properties of silicone rubber are reported at 35°C for a series of pure gases (He, N₂, CH₄, CO₂, and C₂H₄) and gas mixtures (CO₂/CH₄ and N₂/CO₂) for pressures up to 60 atm. The effects of pressure and concentration on the permeability of various gases have been analyzed to consider plasticization and hydrostatic compression effects. Over an extended pressure and concentration range, both compression of free volume and eventual plasticization phenomena were observed for the various penetrants. In pure component studies, plasticization effects tended to dominate hydrostatic compression effects for the more condensible penetrants (C₂H₄ and CO₂) while the reverse was true for the low sorbing N₂ and He. These issues are discussed in terms of penetrant diffusion coefficients versus pressure to clarify the interplay between the opposing effects for the penetrants of markedly different solubilities. Additional insight into the somewhat complex interplay of the plasticization and hydrostatic compression effects are given by mixed gas permeation results. It was found that the permeability of nitrogen in a 10/90 CO₂/N₂ and a 50/50 CO₂/N₂ mixture was increased by the presence of CO₂ because the plasticizing nature of CO₂ is able to overcome nitrogen's compression effect.     

Identifying the radiating core of Lighthill’s source term

A decomposition of the Lighthill source term is effected which yields ten sub-terms comprising velocity, vorticity, dilatation and density fields. An analysis methodology is then developed, aimed at understanding the respective roles played by these sub-terms in the production of sound. By Direct Numerical Simulation of a temporal mixing-layer—chosen both for its simplicity and its amenability to analysis in wavenumber space—the radiating components of the different sub-terms are isolated and studied. Interesting identities are observed between specific events in the evolution of the flow and the various sub-terms of the source, and the essence of the sound production mechanism is found to comprise subtle imbalances which disrupt inherent space–time symmetries which exist between the various sub-terms.