Optical properties of bulk Zn1−xCoxO magnetic semiconductors

Polycrystalline Zn_1−xCo_xO (x=0, 0.02, 0.05, 0.10 and 0.15) oxides have been synthesized by solid state reaction via sintering ZnO and Co powders in open air. X-ray diffraction analyses using Rietveld refinement indicate that a stoichiometric single phase with a wurtzite-like structure was found in Zn_1−xCo_xO samples with x up to 0.10. The elemental mapping using energy dispersive X-ray spectroscopic analyses presents a uniform distribution of Co. Optical transmittance measurements show that several extra absorption bands appear in the Co-doped ZnO, which is due to the transitions between the crystal-field-split 3d levels of tetrahedral Co²⁺ substituting Zn²⁺ ions. Raman measurements show that limited host lattice defects are induced by Co doping. Magnetization measurements reveal that the Co-doped ZnO samples are paramagnetic due to the absence of free carriers and in low temperature the dominant magnetic interaction is nearest-neighbor antiferromagnetic.     

MM-Wave Band Transversal Filter with Improved Spurious Characteristics

A spurious-suppressed transversal filter using the multiple-coupled line is proposed. The frequency characteristics of the multiple-coupled line are analyzed in detail. In order to compare the performances, the novel spurious-suppressed transversal filter using triple-coupled half-wavelength directional couplers is designed at 30 GHz. The spurious-suppression characteristics of the proposed transversal filter are verified by the full wave analysis and the measurement. The spurious response of the fabricated filter is effectively suppressed and the large attenuation is obtained in the stopband.     

A facile synthesis of simple alkaloids—synthesis of 2,3-polymethylene-4(3H)-quinazolinones and related alkaloids

An efficient procedure for preparation of the simple alkaloids, 2,3-polymethylene-4(3H)-quinazolinones, luotonin A, tryptanthrin, and rutaecarpine has been established by the reaction of lactam-HCl salts with POCl₃ followed by cyclization with methyl anthranilate.     

Native oxide buried InAlAs ridge waveguide laser diode

InAlAs wet thermal oxidation process was adopted to fabricate ridge waveguide laser diodes. First, applying the oxidation process on the whole etched surface of an InAlAs upper cladding layer, we formed a current blocking and optical confining layer of ridge waveguide laser diode. This is a self-aligned structure, which makes the laser diode fabrication steps much simpler and etching-depth control less important. Assessment of the fabricated laser diode revealed that current-voltage characteristics and slope efficiency did not worsen, and threshold current was reduced by the oxidation process. PACS 85.35.Be; 42.55.Px     

Bandgap engineering of self-assembled InAs quantum dots with a thin AlAs barrier

We investigate the effects of a thin AlAs layer with different position and thickness on the optical properties of InAs quantum dots (QDs) by using transmission electron microscopy and photoluminescence (PL). The energy level shift of InAs QD samples is observed by introducing the thin AlAs layer without any significant loss of the QD qualities. The emission peak from InAs QDs directly grown on the 4 monolayer (ML) AlAs layer is blueshifted from that of reference sample by 219 meV with a little increase in FWHM from 42–47 meV for ground state. In contrast, InAs QDs grown under the 4 ML AlAs layer have PL peak a little redshifted to lower energy by 17 meV. This result is related to the interdiffusion of Al atom at the InAs QDs caused by the annealing effect during growing of InAs QDs on AlAs layer.     

A strategy for choosing Gegenbauer reconstruction parameters for numerical stability

The Gegenbauer reconstruction method was first proposed in 1992, but in early studies no attempts were made to optimize the relevant parameters of this method. These parameters were allowed to grow proportionally with the number of nodes which, in many cases, resulted in exponential convergence for a selected range of the proportionality constants. Early studies also made clear that very large error bounds could be expected if these key parameters were not chosen carefully. Subsequent studies then pointed out that, although unrelated to the method’s analytically predictable domains of poor accuracy, round-off errors could also sabotage the method’s accuracy. The challenge of successfully implementing a Gegenbauer reconstruction then rests on understanding the performance trade-offs we can expect when choosing the key parameters in accordance with different objectives.In this study, we propose a new strategy for choosing optimal parameters in the Chebyshev-Gegenbauer reconstruction method, specifically to achieve numerical stability. This strategy is based on asymptotic analysis as well as minimization problems in one and two dimensions. The effectiveness of our approach, which could also be applied to a wider selection of polynomials is then illustrated with results from numerical experiments.     

Velocity renormalization and carrier lifetime in graphene from the electron-phonon interaction

We present a first-principles investigation of the phonon-induced electron self-energy in graphene. The energy dependence of the self-energy reflects the peculiar linear band structure of graphene and deviates substantially from the usual metallic behavior. The effective band velocity of the Dirac fermions is found to be reduced by 4%-8%, depending on doping, by the interaction with lattice vibrations. Our results are consistent with the observed linear dependence of the electronic linewidth on the binding energy in photoemission spectra.     

Kondo effect in magnetic tunnel junctions

Tunneling magnetoresistance was found to be suppressed with decreasing temperature for magnetic tunnel junctions (MTJs) oxidized under high plasma power. A strong temperature dependence of the junction resistance was observed, along with zero-bias anomalies of dynamic resistance at low temperatures. Resistance shows a logarithmic dependence on temperature, and resistance versus temperature exhibits a scaling behavior. Our experimental data can be explained in a consistent way by the Kondo effect in the MTJs with the Kondo temperature TK=20-30 K.     

Semiconductor Emitters in Entropy Sources for Quantum Random Number Generation

Random number generation (RNG) is needed for a myriad of applications ranging from secure communication encryption to numerical simulations to sports and games. However, generating truly random numbers can be elusive. Pseudorandom bit generation using computer algorithms provides a high random bit generation rate. Nevertheless, the reliance on predefined algorithms makes it deterministic and predictable once initial conditions are known. Relying on physical phenomena (such as measuring electrical noise or even rolling dice) can achieve a less predictable sequence of bits. Furthermore, if the physical phenomena originate from quantum effects, they can be truly random and completely unpredictable due to quantum indeterminacy. Traditionally, physical RNG is significantly slower than pseudorandom techniques. To meet the demand for high-speed RNG with perfect unpredictability, semiconductor light sources are adopted as parts of the sources of randomness, i.e., entropy sources, in quantum RNG (QRNG) systems. The high speed of their noise, the high efficiency, and the small scale of these devices make them ideal for chip-scale QRNG. Here, the applications and recent advances of QRNG are reviewed using semiconductor emitters. Finally, the performance of these emitters is compared and discuss their potential in future technologies.     

Oscillatory behavior of supersonic impinging jet flows

Oscillatory flows of a choked underexpanded supersonic impinging jet issuing from a convergent nozzle have been computed using the axisymmetric unsteady Navier--Stokes system. This paper focuses on the oscillatory flow features associated with the variation of the nozzle-to-plate distance and nozzle pressure ratio. Frequencies of the surface pressure oscillation and flow structural changes from computational results have been analyzed. Staging behavior of the oscillation frequency has been observed for both cases of nozzle-to-plate distance variation and pressure ratio variation. However, the staging behavior for each case exhibits different features. These two distinct staging behaviors of the oscillation frequency are found to correlate well if the frequency and the distance are normalized by the length of the shock cell. It is further found that the staging behavior is strongly correlated with the change of the pressure wave pattern in the jet shear layer, but not with the shock cell structure. Communicated by K. Takayama PACS 02.60.Cb; 47.40.−x; 47.40.Nm; 47.35.+I; 47.15.−x