Thickness dependence of thermally induced changes in surface and bulk properties of Nafion® nanofilms

Thermally induced changes in surface wettability, dewetting behavior, and proton transport of “self‐assembled” nanothin Nafion^® films (4–300 nm) on SiO₂ substrate is reported. Thermal annealing induces switching of the surface wettability of 55 nm and thinner films from hydrophilic to super‐hydrophobic. Thickness dependence of this behavior is observed with higher annealing temperature required for lower thickness films, indicating highly restrictive mobility of Nafion^® ionomer as film thickness decreases. Dewetting is only observed for 4‐nm thin film. Significant suppression in proton conductivity upon thermal annealing was noted. Similarly, two other bulk properties, water uptake and swelling, were found to decrease upon annealing. This work reports a systematic examination of the thickness dependence of thermally induced changes in both surface and bulk properties of ultra‐thin Nafion^®. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1267–1277     

A rhodium‐catalyzed route for oxidative coupling and cyclization of 2‐aminobenzyl alcohol with ketones leading to quinolines

2‐Aminobenzyl alcohol undergoes oxidative cyclization with aryl(alkyl), alkyl(alkyl) and cyclic ketones in dioxane at 80° in the presence of a catalytic amount of RhCl(PPh₃)₃ along with KOH to afford the corresponding quinolines in good yields. The catalytic pathway seems to be proceeded via a sequence involving initial oxidation of 2‐aminobenzyl alcohol to 2‐aminobenzaldehyde by a rhodium catalyst, cross aldol reaction between 2‐aminobenzaldehyde and ketones, and cyclodehydration.     

Electronically selective chemical functionalization of carbon nanotubes: correlation between Raman spectral and electrical responses

Single-walled carbon nanotubes (SWNTs) demonstrate remarkable electronic and mechanical properties useful in developing areas such as nanoelectromechanical systems and flexible electronics. However, the highly inhomogeneous electronic distribution arising from different diameters and chirality in any given as-synthesized SWNT samples imposes severe limitations. Recently demonstrated selective chemical functionalization methods may provide a simple scalable means of eliminating metallic tubes from SWNT transistors and electronic devices. Here, we report on combined electron transport and Raman studies on the reaction of 4-bromobenzene diazonium tetrafluoroborate directly with single and networks of SWNT transistors. First, Raman studies are carried out on isolated individual SWNTs grown on SiO2/Si substrates by chemical vapor deposition with and without metal contacts. Metallic tubes are found to have, on average, higher reactivity toward diazonium reagents. However, a considerable degradation of electrical properties of semiconducting tubes occurs if the reaction is carried out to the point where the conductivity of metallic tubes is significantly suppressed. Insights from single-tube studies are then applied to elucidate the electrical and the Raman responses of SWNT random network transistors of different channel lengths to chemical functionalization.     

Effects of surfactant and molecular weight of polyol on grating formation and switching of holographic PDLC

The interposition of surfactants between polymer and liquid crystal (LC) droplets was theoretically predicted by the positive spreading coefficient (0 < λ₃₁) and utilized to interpret the morphology, grating formation kinetics, diffraction efficiency, and switching of the holographic polymer dispersed liquid crystal (HPDLC), prepared from various types (octanoic acid, poly oxyethylene octyl phenyl ether, and perfluoro‐1‐butanesulfonyl fluoride) and amounts (0–9 wt%) of surfactant and molecular weights of polyol (PPG). Regardless of the surfactant type, diffraction efficiency increased with the addition and increasing amount of surfactant, a tendency consistent with increasing value of spreading coefficient, which is determined by the formulations of grating formation. In contrast, diffraction efficiency showed a maximum with the polypropylene glycol (PPG) molecular weight. Surfactant effectively reduced the anchoring energy and electrically drove the film which otherwise was not driven. Overall, surfactant with greater λ₃₁ gave smaller droplet, greater diffraction efficiency, driving voltage, contrast ratio, and smaller response time. Copyright © 2008 John Wiley & Sons, Ltd.     

Dynamic DSC Characterization of Epoxy Resin by Means of the Avrami Equation

A phenomenological approach was used to characterize the cure processes of epoxy resins (a diglycidyl ether of bisphenol A and its modifier CTBN) from dynamic experiments by DSC. Various kinetic parameters were obtained by using a modified Avrami expression. The resulting overall activation energies for the two systems agreed very well with the published data in the whole cure temperature range. In contrast with the isothermal results and the general dynamic models, a change in the exponent and the non-linear temperature dependence of the rate constant were also observed.This revised version was published online in November 2005 with corrections to the Cover Date.     

BIOLUMINESCENCE OF ACETALDEHYDE CATALYZED BY BACTERIAL LUCIFERASE

Abstract— Bioluminescence from the oxidation of acetaldehyde by bacterial luciferase of Photobacterium fischeri has been demonstrated for the first time and its efficiency has been compared with that of nonanal and other short chain aldehydes.     

Blue luminescence of nanocrystalline PbWO4 phosphor synthesized via a citrate complex route assisted by microwave irradiation

Nanocrystalline PbWO₄ phosphor powders, which have scheelite structure, were successfully synthesized at low temperatures via a modified citrate complex route assisted by microwave irradiation. Crystallization of the PbWO₄ precursor were detected at 400 °C, and entirely completed at 500 °C. Prepared PbWO₄ nanocrystallites showed primarily spherical and disperse morphology. The average crystallite sizes were between 18 and 29 nm, showing an ordinary tendency to increase with temperature. The nanocrytalline PbWO₄ phosphor powders exhibited spread-eagle shape of blue luminescence. Especially the PbWO₄ phosphor powders prepared at 600 °C showed the strongest luminescent intensity, which was due to the higher crystallinity and homogeneous particle morphology.     

The Design of Polymer‐based Nanocarriers for Effective Transdermal Delivery

This study reports a facile and practical means to non‐invasively deliver biologically active ingredients through the skin using polymer‐based nanocarriers. For this, polymer nanocapsules were fabricated with different surface charges as well as glass transition temperatures and we observed their ability to deliver the encapsulated active ingredient, coenzyme Q10, through the skin layer. Direct imaging of a probe molecule, Nile Red, and a matrix polymer labeled with fluorescence moiety, Lucifer Yellow, allowed us to demonstrate that the probe molecule readily permeates into the deep skin, while the matrix polymer stays in the stratum corneum layer due to electrostatic interactions. Quantitative characterization of the penetrating amount of coenzyme Q10 using the Frantz cell method proved that, to achieve improved delivery efficiency, the nanocapsule should have a low glass transition temperature as well as positive surface charges.

     

Crystal structure and electronic properties of 2-amino-2-methyl-1-propanol (AMP) carbamate

A crystal structure of a carbamate of 2-amino-2-methyl-1-propanol (AMP-carbamate) has been elucidated and its structural and electronic properties investigated by density functional theory calculations and natural bond orbital analyses.