Structure and defects at Y2BaCuO5 interfaces in melt-textured YBa2Cu3Ox superconductors

Y₂BaCuO₅ (211) inclusions are prominent microstructural features found in melt-textured YBa₂Cu₃O_x (123) superconductors. These particles are of interest because the 123/211 interfaces and the interface-associated defects have been proposed to be flux pinning centers. In addition, the 211 particles are believed to be heterogeneous nucleation centers of dislocation which can increase the critical current density of 123. Unfortunately, only limited studies have been performed on these particles to ascertain their roles in flux pinning. In this investigation, 211 particles, the interfacial structure and defects in undeformed and mechanically deformed melt-textured 123 have been studied by transmission electron microscopy. It was found that there appears to be a preferred orientation between large oblong 211 particles and the 123 matrix. In addition, while the 123/211 interfaces in undeformed 123 are sharp and relatively undistorted, the interfaces in deformed 123 samples are much thicker. Also, the distribution of strained regions and dislocations around oblong 211 particles in undeformed 123 is nonuniform; the interfaces of low surface curvature are relatively free of defects while the surfaces of high curvature are abundant in dislocations. In contrast, the 123/211 interfaces in deformed 123 samples contain high density of dislocations regardless of interface curvature.     

Ferroelectric polarization switching in nylon-11

Cold-drawn Nylon-11 films, which were prepared by stretching the melt-quenched films to a draw ratio of 2.8: 1 at room temperature, were found to exhibit an electric displacement versus electric field hysteresis loop. The results confirmed that the Nylon-11 film exhibited ferroelectric behavior at or below room temperature. The coercive fields were 65, 98, 125, 160, and 215 MV/m at 20, 0, ?20, ?40, and ?60°C and the remanent polarization at ?20°C (where there was considerably less dc conduction) was 56 mC/m². Switching of the polarization was almost completed within 20 ms.     

Laser-induced breakdown of soda-lime glass microspheres using Nd:YAG laser

The Nd:YAG laser-induced breakdown of 20 μm glass microspheres was investigated using time-resolved optical shadow and Schlieren images. Time-resolved imaging showed the location of the initial breakdown and the shockwave motion over its first 400 μm of expansion. Measured shockwave velocities were in the range of 1–10 km/s and showed a linear dependency on laser fluence within 30 ns.     

Irradiation-induced reduction and luminescence properties of Sm doped in BaBPO5

Usually, Sm²⁺ ions could be reduced by heating the materials in reducing atmospheres. Exposure to ionizing radiations is also known to cause Sm³⁺→Sm²⁺ conversion. In this work, BaBPO₅ doped with the samarium ion was prepared by high temperature solid-state reaction. Sm²⁺ ions were obtained by two different reduction methods, i.e., heating in H₂ reduced atmosphere and X-ray irradiation. The measurements of X-ray diffraction (XRD), and scanning electron microscope (SEM) were investigated. It is found that the conversion of Sm³⁺→Sm²⁺ is very efficient in BaBPO₅ hosts after X-ray irradiation. Sm²⁺ ions under these two reduction methods exhibit different characteristics that were studied by measurements of luminescence and decay. The results showed that the luminescence properties of Sm²⁺ ions in BaBPO₅ were highly dependent on the sample preparation conditions.     

On eigenvalues and eigenvectors of graphs

It is known that there exists an equivalence relation between the adjacency matrix of graph theory and the Hückel matrix of Hückel molecular orbital theory. This paper presents some useful methods which allow us to systematically find eigenvalues and eigenvectors of various classes of graphs without calculating characteristic polynomials. Results obtained from this study give insight into the topological studies of molecular orbitals.Dedicated to Professor Frank Harary on the occasion of his 70th birthday.     

Output dynamics and stabilisation of a multi-mode double-clad Yb-doped silica fibre laser

The intensity dynamics of the double-clad Yb fibre laser have been characterised. Stabilisation of the fibre laser intensity by using uniform bi-directional pumping is demonstrated. For the single-end-pumped Yb fibre laser, the output becomes more stable for the shorter fibre length due to the higher threshold of stimulated Brillouin scattering, SBS, and Kerr effects and the reduction of saturated absorber effects caused by any unpumped fibre section. By additional pumping in a double-end-pumped configuration, the output power can be scaled higher before detecting high intensity pulses initiated by SBS in the Yb fibre laser due to the reduction of saturable absorption effect. It is confirmed that uniform pumping enhances the stability of the laser output.     

Study of interactions of various ionic species with solvents toward the design of receptors

In earlier studies, the interactions of isolated ionic species with various solvents were investigated using ab initio calculations. The ionic species investigated included cations (proton, hydronium, ammonium, and metal cations) and anions (single electron, hydroxide, and halide anions). However in the present study, we investigate the interactions of these ionic species with the solvent in the presence of other competing ionic species. We also elaborate on how the information obtained from these extensive studies have been employed in designing and synthesizing various kinds of novel ionophores and receptors.     

Morphology-dependent photoluminescence property of red-emitting LnOCl:Eu (Ln=La and Gd)

Three different synthetic methods, the liquid phase process in HCl solution, the solvothermal reaction, and the surfactant-assisted solvothermal reaction, were explored to selectively control the particle shape and to enhance the luminescence intensity of the PbFCl-type red-emitting oxychloride phosphors LnOCl:Eu (Ln=La and Gd). The solvothermal pressure facilitated the low-temperature crystallization of the rod-shape particles for both Ln=La and Gd. It is noted that LaOCl:Eu nanorods show highly porous particle surface and quite low photoemission intensity. In contrast, the solvothermal synthesis could highly enhance the red-emission of GdOCl:Eu with no porous surface so as to be comparable to that of commercial Y₂O₃:Eu phosphor. An addition of surfactant material during solvothermal reaction yielded a rhomboidal-shape phosphor particles with no porous surface for both Ln=La and Gd. Interestingly, the elimination of surface porosity by using a surfactant significantly increased the emission intensity of LaOCl:Eu. It is proposed that the application of solvothermal technique for the synthesis of the PbFCl-type oxychloride phosphors is very effective to selectively control the particle shape and consequently to enhance the photoemission intensity if we use an appropriate surfactant material.