Synthesis and characteristics of novel chelate fiber containing amine and amidine groups

A polyacrylonitrile (PAN) fiber was adopted for the backbone of a chelate polymer and poly(acrylo‐amidino ethylene amine) (PAEA) was prepared through a one‐step reaction between the PAN fiber and ethylenediamine (EDA). The maximum removal capacity and degree of substitution were 7.8 meq per gram of dried PAEA and 98%, respectively. The PAEA was tested as an adsorbent in single and two‐component metal aqueous solutions under changing pH. The Cu²⁺ ion accomplished maximum adsorption amount at pH 3 and the order of maximum adsorbed amounts on PAEA is Cu²⁺ > Ag⁺ > Zn²⁺ > Ni²⁺ > Pb²⁺ in molar basis. FT‐IR spectroscopy was employed to characterize the chemical bonding in metal aqueous solutions and surface morphology was examined using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Copyright © 2004 John Wiley & Sons, Ltd.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.     

Electron spin resonance studies of the radiolysis of bi-π-cyclopentadienylalkyls of molybdenum and tungsten

Exposure of (C₅H₅)₂MO(CH₃)₂ and (C₅H₅)₂W(CH₃)₂, prepared from the corresponding dichlorides, to ²⁰Co γ-rays at 77 K gave H₂C.CML₃ carbene species characterised by their ESR spectra, together with a central feature possibly due to the parent cations. Dilute solutions in CD₃OD gave features assigned to the parent anions which were converted on bleaching with visible light into methyl radicals, and H₂C.ML₃ radicals. From the magnitude of the ¹H and ¹⁸³W hyperfine coupling constants, it is deduced that the SOMO for H₂C.WL₃ radicals is strongly localised on carbon.Dilute solutions in aqueous sulphuric acid also gave species with A(2H) = 20 G, identified as the carbene derivatives, H₂C.Ml₃. These were formed on annealing, as signals assigned to HSO₄ · radicals were lost.     

Surface and bulk properties of severely fluorinated carbon fibres

The development of ultra-inert composites using fluorinated carbon fibres as the reinforcement requires fluorinated carbon fibres with a durable surface composition. Here we report the effect of direct fluorination using an F₂/N₂ mixture at 653 K on the surface and bulk properties of two types of high strength carbon fibres. These were treated up to a surface fluorine content of ∼64 at.% and a bulk fluorine content of ∼15 mass%. A colour change was observed after fluorination caused by the changes in the graphitic band structure of the carbon fibres by the introduction of carbon sp³ hybridisation. The tensile strength and Young's modulus decrease after fluorination by up to 33 and 22%, respectively. XRD shows marginal changes in the interlayer distance but the crystallite size increases. Changes in the electrical conductivity of the fluorinated carbon fibres indicate that the modification is confined to the near surface volume. Predominantly covalent C-F bonds are formed as shown by X-ray photoelectron spectroscopy (XPS) and measured zeta (ζ)-potentials. Hence the fluorinated fibres are hydrophobic and have low surface tensions. This and the large increase in fibre surface area, as determined by nitrogen adsorption, is expected to facilitate interfacial interaction between fluorinated carbon fibres and fluoropolymers.     

Antimalarial and cytotoxic activities of bicycl

Biological evaluations of bicyclo[6.4.0]dodecenone derivatives on antimalarial activity in vitro against Plasmodium falciparum and cytotoxicity against human KB cells were made. (+/-)-(1R*,4S*,7R*,8S*)-4-tert-Butyl-dimethylsiloxy-5,5-dimethyl-1-methyl-9-methylene-7-phenylsulfonylbicyclo[6.4.0]dodec-2,11-dien-10-one (15) exhibited potent antimalarial activity, whereas (+/-)-(1R*,7R*,8S*)-1-methyl-9-methylene-7-phenylsulfonylbicyclo[6.4.0]dodec-2,11-dien-10-one (14) showed significant cytotoxic activity in human KB cells. Both 14 and 15 possess, as a structural character, the exo-methylene moiety in their 6-membered ring of the 8-6 fused ring system.     

Preparation of nanoporous MgO-coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells

Sol-gel-derived Mg(OH)(2) gel was coated onto TiO(2) nanoparticles, and the subsequent thermal topotactic decomposition of the gel formed a highly nanoporous MgO crystalline coating. The specific surface area of the electrode that was prepared from the core-shell-structured TiO(2) nanoparticles significantly increased compared with that of the uncoated TiO(2) electrode. The increase in the specific surface area of the MgO-coated TiO(2) electrode was attributed to the highly nanoporous MgO coating layer that resulted from the topotactic reaction. Dye adsorption behavior and solar cell performance were significantly enhanced by employing the MgO-coated TiO(2) electrode. Optimized coating of a MgO layer on TiO(2) nanoparticles enhanced the energy conversion efficiency as much as 45% compared to that of the uncoated TiO(2) electrode. This indicates that controlling the extrinsic parameters such as the specific surface area is very important to improve the energy conversion efficiency of TiO(2)-based solar cells.     

Measurement of nitric oxide by 4,5-diaminofluorescein without interferences

The fluorescent reagent 4,5-diaminofluorescein (DAF-2) has been widely used for specific and quantitative measurements of nitric oxide (NO) in biological tissues. Recently it was reported that dehydroascorbic acid (DHA) and ascorbic acid (AA) interfere with the measurement of NO using DAF-2. A new method of assaying NO using DAF-2 eliminates these interferences; when frozen on dry ice, the NO in the original solution still diffuses and can react with an adjacent frozen block of DAF-2, but the confounding compounds such as DHA do not. Thus, placing the microliter-volume frozen blocks of solutions containing NO and the solutions of DAF-2 adjacent to each other for 30 min results in the concentration dependent formation of fluorescent product (DAF-2T) from the reaction of NO with DAF-2. The product has been characterized and the method validated using both fluorescence spectroscopy and capillary electrophoresis with laser induced fluorescence detection. With this approach, the presence of DHA and AA does not interfere with NO measurements, and product formation is inhibited in the presence of NO scavengers added to either of the solutions before freezing. The contactless DAF-2 method successfully assays NO in nitric oxide synthase-positive vertebrate and invertebrate tissues. This method allows nondestructive NO detection in biological samples that can subsequently be used for morphological and/or biochemical studies.     

Palladium-catalyzed hydrocarbonation of methyleneaziridines with carbon pronucleophiles

The reaction of methyleneaziridine 1 with carbon pronucleophiles (2, H-CR₃) proceeds smoothly in the presence of a palladium catalyst affording the corresponding hydrocarbonation products 5 in good to high yield.     

A polymer-based microfluidic device for immunosensing biochips

This paper describes the design, fabrication, and test of a PDMS/PMMA-laminated microfluidic device for an immunosensing biochip. A poly(dimethyl siloxane)(PDMS) top substrate molded by polymer casting and a poly(methyl methacrylate)(PMMA) bottom substrate fabricated by hot embossing are bonded with pressure and hermetically sealed. Two inlet ports and an air vent are opened through the PDMS top substrate, while gold electrodes for electrochemical biosensing are patterned onto the PMMA bottom substrate. The analyte sample is loaded from the sample inlet port to the detection chamber by capillary force, without any external intervening forces. For this and to control the time duration of sample fluid in each compartment of the device, including the inlet port, diffusion barrier, reaction chamber, flow-delay neck, and detection chamber, the fluid conduit has been designed with various geometries of channel width, depth, and shape. Especially, the fluid path has been designed so that the sample flow naturally stops after filling the detection chamber to allow sufficient time for biochemical reaction and subsequent washing steps. As model immunosensing tests for the microfluidic device, functionalizations of ferritin and biotin to the sensing surfaces on gold electrodes and their biospecific interactions with antiferritin antiserum and streptavidin have been investigated. An electrochemical detection method for immunosensing by biocatalyzed precipitation has been developed and applied for signal registration. With the biochip, the whole immunosensing processes could be completed within 30 min.