Highly Selective and Low Damage Etching of GaAs/AlGaAs Heterostructure using Cl2/O2 Neutral Beam

Highly selective and low damage etching of the GaAs cap layer on AlGaAs is essential in fabricating GaAs/AlGaAs high electron mobility transistors. The GaAs on AlGaAs was etched using a low energy Cl₂/O₂ neutral beam and the Schottky device characteristics fabricated on the exposed AlGaAs were compared with those fabricated after the etching using wet etching and a Cl₂/O₂ ion beam. Using a low energy Cl₂/O₂ ion beam or a Cl₂/O₂ neutral beam, highly selective etching of the GaAs cap layer to AlGaAs similar to wet etching could be achieved through the formation of Al₂O₃ on the exposed AlGaAs during the etching. When the electrical characteristics of the Schottky devices were compared, the devices fabricated after the etching using the neutral beam showed the best electrical characteristics such as electrical stability, low leakage current, higher barrier height, etc. by showing low damage to the exposed AlGaAs surface.     

Tuning the band-gap energy of TiO2-xCx nanoparticle for high performance photo-catalyst

We describe a method tuning the band-gap energy (E_g) of visible light sensitive TiO_2-xC_x nanoparticle. E_g tends to become smaller with the increase in the amount of carbon dopant in TiO_2-xC_x nanoparticle due to the increase in excess electrons. Photo-catalytic oxidative activity, however, did not depend on only the value of E_g, but also the energy level of valence band. TiO_1.96C_0.04 nanoparticle having E_g of 2.6 eV showed outstanding performance in oxidative decomposition of phenol under the irradiation of visible light.     

Sensitivity enhancement of CE and CE-MS for the analysis of peptides by a dynamic pH junction

An analytical method of CE-MS and CE with an online preconcentration technique induced by a dynamic pH junction, addition of organic solvent and large volume injection was developed for sensitive determination of peptides in biological samples. Leucine enkephalin, methionine enkephalin, dynorphin A, β-endorphin and angiotensin II were used as model peptides. The optimal online preconcentration conditions were obtained at a sample matrix consisting of 100?mM borate buffer (pH 10.0) with 50% v/v acetonitrile and a BGE containing 1?M formic acid at pH 2.0, along with a 25-cm injection length. Under the optimized conditions, a 4.0×10(3)-1.1×10(4)-fold increase in peak intensity was achieved without degrading the peak shape. This online preconcentration method was applied to analyze the intracellular angiotensin II within the peptides extracted from HL1 cells and approximately increase of 1×10(4)-fold sensitivity was achieved compared to normal condition. Thus, the developed method could be applied to the analysis of various peptides for peptidomics study in biological samples.     

Synthesis of poly(p‐phenylenediamine‐ co‐o‐aminophenol)/multi‐walled carbon nanotube composites by emulsion polymerization

Organic–inorganic composites composed of electrically conducting copolymer p‐phenylenediamine‐ co‐o‐aminophenol and carboxylic acid functionalized multi‐walled carbon nanotubes [poly(pPD‐co‐oAP)/c‐MWNTs] were prepared via in situ emulsion pathway using sodium dodecyl sulphate (SDS) as an emulsifier and potassium persulphate as an oxidant. Acid functionalized MWNTs were used as cores in the formation of tubular shells of the composites. TEM and FESEM analysis showed that a tubular layer of coated copolymer film of several nanometer thicknesses is present on the c‐MWNTs surfaces. FT‐IR spectra endorsed the formation of composites. TGA results indicated that the decomposition temperatures of composites were higher than the bare copolymer. UV‐visible absorption spectra of diluted colloidal dispersion of composites were similar to those of the bare copolymer. The composites were also confirmed by XRD and XPS. Room‐temperature conductivity increases with an increasing fraction of c‐MWNTs. Copyright © 2009 John Wiley & Sons, Ltd.     

S-Adenosyl-L-methionine ameliorates TNF��-induced insulin resistance in 3T3-L1 adipocytes

An association between inflammatory processes and the pathogenesis of insulin resistance has been increasingly suggested. The IκB kinase-β (IKK-β)/ nuclear factor-κB (NF-κB) pathway is a molecular mediator of insulin resistance. S-Adenosyl-L-methionine (SAM) has both antioxidative and anti-inflammatory properties. We investigated the effects of SAM on the glucose transport and insulin signaling impaired by the tumor necrosis factor α (TNFα) in 3T3-L1 adipocytes. SAM partially reversed the basal and insulin stimulated glucose transport, which was impaired by TNFα. The TNFα-induced suppression of the tyrosine phosphorylation of the insulin receptor substrate-1 (IRS-1) and Akt in 3T3-L1 adipocytes was also reversed by SAM. In addition, SAM significantly attenuated the TNFα-induced degradation of IκB-α and NF-κB activation. Interestingly, SAM directly inhibited the kinase activity of IKK-β in vitro. These results suggest that SAM can alleviate TNFα mediated-insulin resistance by inhibiting the IKK-β/NF-κB pathway and thus can have a beneficial role in the treatment of type 2 diabetes mellitus.     

Hypergolic N,N‐Dimethylhydrazinium Ionic Liquids

N,N‐Dimethylhydrazinium dicyanamide and nitrocyanamide ionic liquids (ILs) were prepared by quaterization of N,N‐dimethylhydrazine with alkyl halides followed by metathesis reactions with silver dicyanamide or silver nitrocyanamide. The key physicochemical properties, such as melting point and decomposition temperatures, density, viscosity, heat of formation, detonation pressure and velocity, and specific impulse were measured/calculated. The impact of anions and alkyl‐substituted cations on these properties is demonstrated. Droplet tests with white‐fuming nitric acid (WFNA) as an oxidizer were utilized to show that the 14 new N,N‐dimethylhydrazinium salts are hypergolic with ignition delay (ID) times ranging from 22 to 1642 ms, thereby suggesting that some may have potential as bipropellants.     

Remarkably Efficient Photocurrent Generation Based on a [60]Fullerene–Triosmium Cluster/Zn–Porphyrin/Boron–Dipyrrin Triad SAM

A new artificial photosynthetic triad array, a [60]fullerene–triosmium cluster/zinc–porphyrin/boron–dipyrrin complex ( 1 , Os₃C₆₀/ZnP/Bodipy), has been prepared by decarbonylation of Os₃(CO)₈(CN(CH₂)₃Si(OEt)₃)(μ₃‐η²:η²:η²‐C₆₀) ( 6 ) with Me₃NO/MeCN and subsequent reaction with the isocyanide ligand CNZnP/Bodipy ( 5 ) containing zinc porphyrin (ZnP) and boron dipyrrin (Bodipy) moieties. Triad 1 has been characterized by various spectroscopic methods (MS, NMR, IR, UV/Vis, photoluminescence, and transient absorption spectroscopy). The electrochemical properties of 1 in chlorobenzene (CB) have been examined by cyclic voltammetry; the general feature of the cyclic voltammogram of 1 is nine reversible one‐electron redox couples, that is, the sum of those of 5 and 6 . DFT has been applied to study the molecular and electronic structures of 1 . On the basis of fluorescence‐lifetime measurements and transient absorption spectroscopic data, 1 undergoes an efficient energy transfer from Bodipy to ZnP and a fast electron transfer from ZnP to C₆₀; the detailed kinetics involved in both events have been elucidated. The SAM of triad 1 ( 1 /ITO; ITO=indium–tin oxide) has been prepared by immersion of an ITO electrode in a CB solution of 1 and diazabicyclo‐octane (2:1 equiv), and characterized by UV/Vis absorption spectroscopy, water contact angle, X‐ray photoelectron spectroscopy, and cyclic voltammetry. The photoelectrochemical properties of 1 /ITO have been investigated by a standard three‐electrode system in the presence of an ascorbic acid sacrificial electron donor. The quantum yield of the photoelectrochemical cell has been estimated to be 29 % based on the number of photons absorbed by the chromophores. Our triad 1 is unique when compared to previously reported photoinduced electron‐transfer arrays, in that C₆₀ is linked by π bonding with little perturbation of the C₆₀ electron delocalization.     

Non-auditory factors affecting urban soundscape evaluation

The aim of this study is to characterize urban spaces, which combine landscape, acoustics, and lighting, and to investigate people's perceptions of urban soundscapes through quantitative and qualitative analyses. A general questionnaire survey and soundwalk were performed to investigate soundscape perception in urban spaces. Non-auditory factors (visual image, day lighting, and olfactory perceptions), as well as acoustic comfort, were selected as the main contexts that affect soundscape perception, and context preferences and overall impressions were evaluated using an 11-point numerical scale. For qualitative analysis, a semantic differential test was performed in the form of a social survey, and subjects were also asked to describe their impressions during a soundwalk. The results showed that urban soundscapes can be characterized by soundmarks, and soundscape perceptions are dominated by acoustic comfort, visual images, and day lighting, whereas reverberance in urban spaces does not yield consistent preference judgments. It is posited that the subjective evaluation of reverberance can be replaced by physical measurements. The categories extracted from the qualitative analysis revealed that spatial impressions such as openness and density emerged as some of the contexts of soundscape perception.     

Development of optical fiber-based respiration sensor for noninvasive respiratory monitoring

In this study, two types of nasal-cavity-attached fiber-optic respiration sensors have been fabricated for noninvasive respiratory monitoring. One is a silver halide optical-fiber-based respiration sensor that can measure the variations of infrared radiation generated by the respiratory airflow from a nasal cavity. The other is a thermochromic-pigment-based fiber-optic respiration sensor that can measure the intensity of reflected light which changes owing to color variations of the temperature-sensing film according to the temperature difference between inspiratory and expiratory air. We have demonstrated the similarities of the respiratory signals using the fiber-optic respiration sensors and the temperature transducer of the BIOPAC? system. In addition, we verified that respiratory signals without the deterioration of the MR image can be obtained using the fiber-optic respiration sensors. It is anticipated that the proposed noninvasive fiberoptic respiration sensors will be highly effective for respiratory monitoring of a patient during MRI procedures.