Multistage homotopy perturbation method for nonlinear reaction networks

In this paper, we present the multistage homotopy perturbation method for finding the solution of the chemical kinetics with nonlinear reactions. We develop a general scheme for finding the analytic solution of chemical reaction networks and apply it to motivating chemical examples such as the enzyme kinetics model and the Brusselator model. We illustrate the numerical result for the models and show the accuracy of the method.     

Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Palladium‐catalyzed carbonylative cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with primary amines leading to N‐alkylmaleimides

Cyclic β‐bromo‐α,β‐unsaturated carboxylic acids are carbonylatively cyclized with primary amines under carbon monoxide pressure in MeCN in the presence of a catalytic amount of PdCl₂(PPh₃)₂ to give N‐alkylmaleimides. Copyright © 2012 John Wiley & Sons, Ltd.     

Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.     

The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

Misalignment tolerance analysis and fabrication for highly efficient parallel optical-electrical convertor module

A compact, highly efficient, and passively assembled parallel optical-electrical convertor module (POECM) for active optical cable application is proposed. This paper presents our POECM structure, optical design simulation results, fabrication process, and data transmission test results, in sequence. The POECM has a compact size of \(18.5\hbox {mm} \times 10\hbox {mm} \times 2.8\hbox {mm}\) . We confirm a data rate of total throughput at 21.6 Gbps ( \(5.4\hbox {Gbps} \times 4\) channels) with a bit error rate of less than \(10^{-12}\) .     

Controlled water flooding of polymer electrolyte fuel cells applying superhydrophobic gas diffusion layer

Water transport is critical to the successful implementation of polymer electrolyte fuel cells (PEFC), especially in long-term and dynamic operation in automotives. Liquid water appears in the fuel cells not only from the water generated at the cathode catalyst layer but also as a result of condensation of water vapor from the humidified gases. In this study, we report a simple approach to prepare a superhydrophobic gas diffusion layer by chemical vapor deposition of polydimethylsiloxane without significant change in pore size of gas diffusion layer unlike other approach adding hydrophobic agent such as polytetrafluoroethylene. A superhydrophobic coating on the GDL can be obtained, leading to exceptionally enhanced power performance and stability of PEFC especially at a high current where water transport becomes more critical.     

Kondo effect in magnetic tunnel junctions

Tunneling magnetoresistance was found to be suppressed with decreasing temperature for magnetic tunnel junctions (MTJs) oxidized under high plasma power. A strong temperature dependence of the junction resistance was observed, along with zero-bias anomalies of dynamic resistance at low temperatures. Resistance shows a logarithmic dependence on temperature, and resistance versus temperature exhibits a scaling behavior. Our experimental data can be explained in a consistent way by the Kondo effect in the MTJs with the Kondo temperature TK=20-30 K.