Monitoring the status of T-cell activation in a microfluidic system

Leukocyte adhesion to the endothelium through surface molecules such as E-selectin and intercellular adhesion molecule-1 (ICAM-1) is a critical cellular event reflecting the physiological status of both cell types. Here we present a microfluidic system that can not only easily monitor the interaction between leukocytes and endothelial cells under physiological conditions, but also screen drug candidates for potential modulation of this interaction. Shear stress, which is an important factor for the binding of activated T cells to tumor necrosis factor-alpha (TNF-α)-treated human umbilical vein endothelial cells (HUVECs), was easily controlled by adjusting the flow rate in the microfluidic system. Whole blood of patients with systemic lupus erythematosus (SLE) who have auto-reactive T cells were infused into the activated HUVECs which subsequently showed a higher level of binding compared to a control blood sample from a person without SLE. When these autoreactive T cells were treated with immunosuppressors tacrolimus and cyclosporin A, the binding of the T cells to HUVECs was dramatically decreased. Therefore, this microfluidic system is capable of differentiating the physiological status of T cells or endothelial cells representing different disease conditions, as well as being useful for the identification of novel reagents that modulate the functions of leukocytes or endothelial cells.     

Determination of cefdinir levels in rat plasma and urine by high‐performance liquid chromatography–tandem mass spectrometry: application to pharmacokinetics after oral and intravenous administration of cefdinir

A selective and sensitive liquid chromatography tandem mass spectrometry method (LC‐MS/MS) was developed and validated for the determination of cefdinir in rat plasma and urine. Following a simple protein precipitation using methanol, chromatographic separation was achieved with a run time of 10 min using a Synergi 4 µ polar‐RP 80A column (150 × 2.0 mm, 4 µm) with a mobile phase consisting of 0.1% formic acid in water and methanol (65:35, v/v) at a flow rate of 0.2 mL/min. The protonated precursor and product ion transitions for cefdinir (m/z 396.1 → 227.2) and cefadroxil, an internal standard (m/z 364.2 → 208.0) were monitored in the multiple reaction monitoring in positive ion mode. The calibration curves for plasma and urine were linear over the concentration range 10–10,000 ng/mL. The lower limit of quantification was 10 ng/mL. All accuracy values were between 95.1 and 113.0% and the intra‐ and inter‐day precisions were <13.0% relative standard deviation. The stability under various conditions in rat plasma and urine was also found to be acceptable at three concentrations. The developed method was applied successfully to the pharmacokinetic study of cefdinir after oral and intravenous administration. Copyright © 2013 John Wiley & Sons, Ltd.     

Redox behavior of V/MgO catalyst in H2S wet oxidation at room temperature

The room temperature wet catalytic oxidation was conducted in a batch reactor with V/MgO catalyst. The XRD study of the catalyst used indicated that V/MgO could not only oxidize H2S to sulfur selectively, but also prevent the sulfidation of metal oxide effectively at the room temperature. The XPS study indicated that the H2S oxidation with V/MgO could proceed by a redox mechanism (V⁵⁺↔ V⁴⁺) and that V³⁺ formation (V⁴⁺→ V³⁺), was responsible for the deactivation of V/MgO. This revised version was published online in June 2006 with corrections to the Cover Date.     

Supercritical fluid extraction of the fluoroquinolones norfloxacin and ofloxacin from orally treated-chicken breast muscles

Supercritical fluid extraction (SFE) of the fluoroquinolones norfloxacin and ofloxacin from chicken breast muscles was examined. A liquid chromatography with fluorescence detection was used for the determination of the fluoroquinolones. Extraction conditions of the SFE were optimized by determining the extraction parameters to achieve a sufficiently high recovery of each fluoroquinolone in fortified-muscle samples. Recovery values for the extraction of the fluoroquinolones using the SFE ranged from 70 to 87%. Chickens were treated orally with each fluoroquinolone and their muscles were extracted at set time intervals for time-course determination of the fluoroquinolones in chickens. The SFE combined with liquid chromatographic analysis showed that the concentrations of the fluoroquinolones decreased gradually with time in the chicken muscles after oral treatment, giving a concentration less than 5 ng/ml in 120 h. No further sample cleanup procedures were required after the SFE. These results suggest that SFE method is an extraction method for the determination of norfloxacin and ofloxacin in chicken muscle.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

Remarkably Efficient Photocurrent Generation Based on a [60]Fullerene–Triosmium Cluster/Zn–Porphyrin/Boron–Dipyrrin Triad SAM

A new artificial photosynthetic triad array, a [60]fullerene–triosmium cluster/zinc–porphyrin/boron–dipyrrin complex ( 1 , Os₃C₆₀/ZnP/Bodipy), has been prepared by decarbonylation of Os₃(CO)₈(CN(CH₂)₃Si(OEt)₃)(μ₃‐η²:η²:η²‐C₆₀) ( 6 ) with Me₃NO/MeCN and subsequent reaction with the isocyanide ligand CNZnP/Bodipy ( 5 ) containing zinc porphyrin (ZnP) and boron dipyrrin (Bodipy) moieties. Triad 1 has been characterized by various spectroscopic methods (MS, NMR, IR, UV/Vis, photoluminescence, and transient absorption spectroscopy). The electrochemical properties of 1 in chlorobenzene (CB) have been examined by cyclic voltammetry; the general feature of the cyclic voltammogram of 1 is nine reversible one‐electron redox couples, that is, the sum of those of 5 and 6 . DFT has been applied to study the molecular and electronic structures of 1 . On the basis of fluorescence‐lifetime measurements and transient absorption spectroscopic data, 1 undergoes an efficient energy transfer from Bodipy to ZnP and a fast electron transfer from ZnP to C₆₀; the detailed kinetics involved in both events have been elucidated. The SAM of triad 1 ( 1 /ITO; ITO=indium–tin oxide) has been prepared by immersion of an ITO electrode in a CB solution of 1 and diazabicyclo‐octane (2:1 equiv), and characterized by UV/Vis absorption spectroscopy, water contact angle, X‐ray photoelectron spectroscopy, and cyclic voltammetry. The photoelectrochemical properties of 1 /ITO have been investigated by a standard three‐electrode system in the presence of an ascorbic acid sacrificial electron donor. The quantum yield of the photoelectrochemical cell has been estimated to be 29 % based on the number of photons absorbed by the chromophores. Our triad 1 is unique when compared to previously reported photoinduced electron‐transfer arrays, in that C₆₀ is linked by π bonding with little perturbation of the C₆₀ electron delocalization.     

Hypergolic N,N‐Dimethylhydrazinium Ionic Liquids

N,N‐Dimethylhydrazinium dicyanamide and nitrocyanamide ionic liquids (ILs) were prepared by quaterization of N,N‐dimethylhydrazine with alkyl halides followed by metathesis reactions with silver dicyanamide or silver nitrocyanamide. The key physicochemical properties, such as melting point and decomposition temperatures, density, viscosity, heat of formation, detonation pressure and velocity, and specific impulse were measured/calculated. The impact of anions and alkyl‐substituted cations on these properties is demonstrated. Droplet tests with white‐fuming nitric acid (WFNA) as an oxidizer were utilized to show that the 14 new N,N‐dimethylhydrazinium salts are hypergolic with ignition delay (ID) times ranging from 22 to 1642 ms, thereby suggesting that some may have potential as bipropellants.     

Metal-directed supramolecular assembly of metal(II) benzoates (M = Co,Ni, Cu,Zn, Mn,and Cd) with 4,4′-bipyridine: Effects of metal coordination modes and novel catalytic activities

Six polymeric metal(II)-benzoate complexes of formula [Co₂(O₂CPh)₄(4,4′-bpy)₂]_n (1-Co), [Ni(O₂CPh)₄(H₂O)₂(4,4′-bpy)]_n (2-Ni), [Cu₂(O₂CPh)₄(4,4′-bpy)]_n (3-Cu), [Zn₂(O₂CPh)₂(OH)₂(4,4′-bpy)₂]_n (4-Zn), [Zn₃(O₂CPh)₄(μ-OH)₂(4,4′-bpy)₂]_n (5-Zn), and [Cd₂(O₂CPh)₄(4,4′-bpy)₂]_n (6-Cd) have been synthesized and characterized (4,4′-bpy = 4,4′-bipyridine). 1-Co and 6-Cd show ladder-type double chains, 2-Ni does a helical structure, 3-Cu does a one-dimensional chain containing paddle-wheel units, 4-Zn does a zigzag chain, and 5-Zn does two-dimensional sheets. Since different structures provide different coordination geometry of each metal ion, it is clear that selection of appropriate metal ions can control the coordination geometry of each metal ion to form different crystal structures. Reactivity study of the compounds 1–7 for the transesterification of a variety of esters has shown that 4-Zn and 5-Zn are very efficient and the best among them. The catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, also catalyzed efficiently the transesterification of a variety of esters, and its reactivity is comparable to 4-Zn and 5-Zn. Moreover, the redox-active metal-containing polymers, 1-Co, 3-Cu, and 7-Mn, have shown efficient catalytic reactivities for the transesterification reactions, while 2-Ni has displayed a very slow conversion. The reactivities of the compounds used in this study are in the order of 5-Zn > 4-Zn > 6-Cd > 7-Mn ∼ 3-Cu > 1-Co > 2-Ni, indicating that the non-redox metal-containing compounds (5-Zn, 4-Zn, and 6-Cd) show better activity than the redox-active metal-containing compounds (7-Mn, 3-Cu, 1-Co, and 2-Ni). These results suggest that it is possible to tune the catalytic activities by changing from Zn to those metals such as Cd, a kinetically inert metal, or Cu, Mn, and Co, the redox-active metals.