Native oxide buried InAlAs ridge waveguide laser diode

InAlAs wet thermal oxidation process was adopted to fabricate ridge waveguide laser diodes. First, applying the oxidation process on the whole etched surface of an InAlAs upper cladding layer, we formed a current blocking and optical confining layer of ridge waveguide laser diode. This is a self-aligned structure, which makes the laser diode fabrication steps much simpler and etching-depth control less important. Assessment of the fabricated laser diode revealed that current-voltage characteristics and slope efficiency did not worsen, and threshold current was reduced by the oxidation process. PACS 85.35.Be; 42.55.Px     

Effects of the Various Cooling Conditions on 1,064-nm nd:Yag Laser Treatment for Selective Photothermolysis

The purpose of this study was to find optimum treatment conditions for selective photothermolysis by evaluating internal–external heat distributions according to different cooling methods. The 1,064-nm Nd:YAG laser was transmitted into a skin-mimicking phantom with different cooling conditions, and its minimum temperatures and sub-zero times were measured. The cooling methods were classified into a total of eight conditions composed of five cryogen spray cooling conditions and three air cooling conditions. Based on the experimental results, condition 2 was selected as the optimum cooling condition for selective photothermolysis obtained from the cryogen spray cooling method.     

Multiferroic characteristics of the strained epitaxial Bi0.9Ho0.1FeO3 thin film

We fabricated high quality epitaxial Bi_0.9Ho_0.1FeO₃ thin films which exhibited the tetragonally stained structure with a c/a ratio of about 1.04. The Bi_0.9Ho_0.1FeO₃ thin film showed a good ferroelectric property with the high remanent polarization (P_r) of about 80 μC/cm². The ferromagnetic hysteresis loop with a clear remanent magnetization was shown. The coercive field and the remanent magnetization of the Bi_0.9Ho_0.1FeO₃ film are 6200 Oe and 1.7 emu/g, respectively. The abrupt conduction due to space charge limited (SCL) was revealed in leakage current density versus electric field.     

Supercapacitive electrochemical performance of graphene-containing carbon aerogel prepared using polyethyleneimine-modified graphene oxide

Graphene-containing carbon aerogel was prepared by a sol–gel polymerization of resorcinol-formaldehyde (RF) method using polyethyleneimine (PEI)-modified chemically exfoliated grapheme oxide, and its electrochemical performance as an electrode for supercapacitor was examined. The effect of PEI in the preparation of RFGO (resorcinol-formaldehyde and graphene oxide) solution on the physicochemical and electrochemical properties of graphene-containing carbon aerogel (CAPG) was investigated. For comparison, graphene-containing carbon aerogel was prepared using PEI-free graphene oxide (CAG). Graphene-free carbon aerogel (CA) was also prepared. CAPG showed the highest BET surface area (792 m²/g) and the largest pore volume (1.64 cm³/g) with well-developed porous structure. Various electrochemical measurements revealed that CAPG showed high specific capacitance (205 F/g), low equivalent series resistance (0.55 Ω), and superior capacitive behavior. The PEI-modified graphene oxide played an important role in enhancing physicochemical properties and supercapacitive electrochemical performance of CAPG.     

Photovoltaic performance of flexible Cu(In,Ga)Se2 thin-film solar cells with varying Cr impurity barrier thickness

We report the effect of Cr impurity barrier on Cu(In,Ga)Se₂ (CIGS) thin-film solar cells prepared on flexible substrates. The Cr films with varying the thickness (t_Cr) were deposited on stainless steel substrates using direct-current magnetron sputtering. The solar cell performance was improved by increasing t_Cr since the diffusion of Fe impurities from the substrate to CIGS was suppressed. Although the elemental composition, grain size, and strain of CIGS film showed little change with varying Fe content, the fill factor and the short-circuit current density increased as decreasing Fe. The Fe increased the series resistance, shunt paths, and saturation current density. The reduction of Fe caused a steeper bandgap grading in CIGS which enhances current collection due to higher electric fields in bulk CIGS. CIGS solar cells with 1000 nm-thick Cr barrier showed the best conversion efficiency of 9.05%.     

Toughening poly(lactic acid) (PLA) through in situ reactive blending with liquid polybutadiene rubber (LPB)

Abstract

Liquid polybutadiene rubber (LPB) was blended with poly(lactic acid) (PLA) through reactive and non-reactive routes to enhance the toughness of the PLA. The reactively blended PLA (PBR10) was prepared by melt blending the PLA with the LPB in the presence of dicumyl peroxide (DCP), a radical initiator, while the PB10 was just melt blended without the DCP. Fourier transform infrared (FTIR) spectra and wide-angle X-ray diffraction (WAXD) patterns were used to study the molecular structure of the blends. Properties were investigated through universal testing machine (UTM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscope (SEM) analysis, and rheological measurements. The results indicated that the radical crosslinking by the DCP could increase the compatibility between the PLA and LPB and disperse the rubber particles at the nanoscale in the PLA matrix. As a result, the toughness and melt viscosity of the PLA was significantly enhanced through the reactive blending, which is promising for the practical application of the modified PLA in the area of packaging.     

Black phosphorus saturable absorber for ultrafast mode‐locked pulse laser via evanescent field interaction

Black phosphorus, or BP, has found a lot of applications in recent years including photonics. The most recent studies have shown that the material has an excellent optical nonlinearity useful in many areas, one of which is in saturable absorption for passive mode‐locking. A direct interaction scheme for mode‐locking, however, has a potential to optically cause permanent damage to the already delicate material. Evanescent field interaction scheme has already been proven to be a useful method to prevent such danger for other 2‐dimensional nanomaterials. In this report, we have utilized the evanescent field interaction to demonstrate that the optical nonlinear characteristics of BP is sufficiently strong to use in such an indirect interaction method. The successful demonstration of the passive mode‐locking operation has generated pulses with the pulse duration, repetition rate, and time bandwidth product of 2.18 ps, 15.59 MHz, and 0.336, respectively.     

The effect of severe plastic deformation and annealing conditions on mechanical properties and restoration phenomena in an ultrafine-grains Fe-28.5%Ni steel

The effect of annealing condition on the microstructure evolution, together with mechanical properties of Fe-28.5Ni steel processed by one and six cycles of accumulative roll bonding (ARB), was explored. The evolution of microstructure was studied by means of Electron Backscattered Diffraction method. The ARB-processed specimens were annealed for 30 minutes between 500°C and 600°C, and the effect of these annealing processes was elaborated. Results showed a significantly reduced martensite phase during ARB process cycles. Moreover, a refined and stabilised ultrafine structure was obtained in 6-cycle ARB-processed specimen. Results also show that by annealing the 1-cycle specimen at 550°C, no significant microstructural change and mechanical properties variation are identified. As such, no significant microstructural change and mechanical properties variation were notified for annealing of 6-cycle ARB-processed specimen at 500°C. However, annealing at 600°C in both conditions led to a complete recrystallisation of the deformed structure. Annealing at 550°C in 6-cycle ARB-processed specimen showed partial recrystallisation as well as an abnormal grain growth characteristic. The abnormal grain growth was seen by annealing of 1-cycle ARB-processed specimen at 600°C. The changing features of dislocations were discussed in these specimens in terms of changing the dynamics of low- and high-angle grain boundaries. Tensile test results also showed a significant increase in the yield/ultimate tensile strengths with the application of ARB cycles. Although ARB process led to a rapid reduction of total elongation, full restoration during high-temperature annealing returned this value back to the initial, non-deformed, condition.