Laminar film condensation on a horizontal disk

Heat and Mass Transfer - The problem of two-dimensional, steady film condensation on a finite-size, isothermal horizontal disk is studied for the case in which a cold plate faces upwards. The...     

Focusing and waveguiding of Lamb waves in micro-fabricated piezoelectric phononic plates

This paper presents results on the numerical and experimental studies of focusing and waveguiding of the lowest anti-symmetric Lamb wave in micro-fabricated piezoelectric phononic plates. The phononic structure was based on an AT-cut quartz plate and consisted of a gradient-index phononic crystal (GRIN PC) lens and a linear phononic plate waveguide. The band structures of the square-latticed AT-cut quartz phononic crystal plates with different filling ratios were analyzed using the finite element method. The design of a GRIN PC plate lens which is attached with a linear phononic plate waveguide is proposed. In designing the waveguide, propagation modes in square-latticed PC plates with different waveguide widths were studied and the results were served for the experimental design. In the micro-fabrication, deep reactive ion etching (Deep-RIE) process with a laboratory-made etcher was utilized to fabricate both the GRIN PC plate lens and the linear phononic waveguide on an 80 μm thick AT-cut quartz plate. Interdigital transducers were fabricated directly on the quartz plate to generate the lowest anti-symmetric Lamb waves. A vibro-meter was used to detect the wave fields and the measured results on the focusing and waveguiding of the piezoelectric GRIN PC lens and waveguide are in good accordance with the numerical predictions. The results of this study may serve as a basis for developing an active micro plate lens and related devices.     

A novel titanium dioxide-polydimethylsiloxane plate for phosphopeptide enrichment and mass spectrometry analysis

The phosphorylation of proteins is a major post-translational modification that is required for the regulation of many cellular processes and activities. Mass spectrometry signals of low-abundance phosphorylated peptides are commonly suppressed by the presence of abundant non-phosphorylated peptides. Therefore, one of the major challenges in the detection of low-abundance phosphopeptides is their enrichment from complex peptide mixtures. Titanium dioxide (TiO₂) has been proven to be a highly efficient approach for phosphopeptide enrichment and is widely applied. In this study, a novel TiO₂ plate was developed by coating TiO₂ particles onto polydimethylsiloxane (PDMS)-coated MALDI plates, glass, or plastic substrates. The TiO₂-PDMS plate (TP plate) could be used for on-target MALDI-TOF analysis, or as a purification plate on which phosphopeptides were eluted out and subjected to MALDI-TOF or nanoLC-MS/MS analysis. The detection limit of the TP plate was ∼10-folds lower than that of a TiO₂-packed tip approach. The capacity of the ∼2.5 mm diameter TiO₂ spots was estimated to be ∼10 μg of β-casein. Following TiO₂ plate enrichment of SCC4 cell lysate digests and nanoLC-MS/MS analysis, ∼82% of the detected proteins were phosphorylated, illustrating the sensitivity and effectiveness of the TP plate for phosphoproteomic study.     

Contrast enhanced maximum intensity projection ultrasound imaging for assessing angiogenesis in murine glioma and breast tumor models: A comparative study

The purpose of this study was to prospectively compare noninvasive, quantitative measures of vascularity obtained from four contrast enhanced ultrasound (US) techniques to four invasive immunohistochemical markers of tumor angiogenesis in a large group of murine xenografts. Glioma (C6) or breast cancer (NMU) cells were implanted in 144 rats. The contrast agent Optison (GE Healthcare, Princeton, NJ) was injected in a tail vein (dose: 0.4 ml/kg). Power Doppler imaging (PDI), pulse-subtraction harmonic imaging (PSHI), flash-echo imaging (FEI), and Microflow imaging (MFI; a technique creating maximum intensity projection images over time) was performed with an Aplio scanner (Toshiba America Medical Systems, Tustin, CA) and a 7.5 MHz linear array. Fractional tumor neovascularity was calculated from digital clips of contrast US, while the relative area stained was calculated from specimens. Results were compared using a factorial, repeated measures ANOVA, linear regression and z-tests. The tortuous morphology of tumor neovessels was visualized better with MFI than with the other US modes. Cell line, implantation method and contrast US imaging technique were significant parameters in the ANOVA model (p < 0.05). The strongest correlation determined by linear regression in the C6 model was between PSHI and percent area stained with CD31 (r = 0.37, p < 0.0001). In the NMU model the strongest correlation was between FEI and COX-2 (r = 0.46, p < 0.0001). There were no statistically significant differences between correlations obtained with the various US methods (p > 0.05). In conclusion, the largest study of contrast US of murine xenografts to date has been conducted and quantitative contrast enhanced US measures of tumor neovascularity in glioma and breast cancer xenograft models appear to provide a noninvasive marker for angiogenesis; although the best method for monitoring angiogenesis was not conclusively established.     

Characterization of Nano‐porous TiO2 Film Prepared by Sol‐gel Process and Its Application to Dye‐sensitized Solar Cell

In this paper, effects of ethylene glycol (EG) and indium tin oxide (ITO) solution on the morphology, porosity, and roughness of TiO₂ film prepared by sol‐gel process were investigated and discussed. Initially, the addition of EG were used to control the viscosity of the solution and it was found to increase the pore size of TiO₂ film. The various TiO₂ films were investigated and characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) and then assembled to dye‐sensitized solar cell (DSSC) to measure the photoelectric conversion efficiency. The optimum efficiencies of 1.32% with J_sc and V_oc of 2.99 mA/cm² and 0.80 V, respectively, were obtained by the TiO₂ film prepared from a solution containing 20 wt% EG.     

1.3 m m InGaAsN/ GaAs Lasers Grown by MOCVD Using TBAs and DMHy Sources

We have demonstrated InGaAsN/ GaAs single quantum well (SQW) lasers grown by MOCVD using TBAs and DMHy sources. For un-buffer-strained InGaAsN/ GaAs system, our SQW lasers of 1.3 m m range is among the best in terms of transparency and threshold current density.     

Probing the organic-mineral interface at the molecular level in model biominerals

It is widely known that macromolecules, such as proteins, can control the nucleation and growth of inorganic solids in biomineralizing organisms. However, what is not known are the complementary molecular interactions, organization, and rearrangements that occur when proteins interact with inorganic solids during the formation of biominerals. The organic-mineral interface (OMI) is expected to be the site for these phenomena, and is therefore extraordinarily interesting to investigate. In this report, we employ X-ray absorption near edge (XANES) spectromicroscopy to investigate the electronic structure of both calcium carbonate mineral crystals and polypeptides, and detect changing bonds at the OMI during crystal growth in the presence of polypeptides. We acquired XANES spectra from calcium carbonate crystals grown in the presence of three mollusk nacre-associated polypeptides (AP7N, AP24N, n16N) and in the presence of a sea urchin spicule matrix protein, LSM34. All these model biominerals gave similar results, including the disruption of CO bonds in calcite and enhancement of the peaks associated with C-H bonds and C-O bonds in peptides, indicating ordering of the amino acid side chains in the mineral-associated polypeptides and carboxylate binding. This is the first evidence of the mutual effect of calcite on peptide chain and peptide chain on calcite during biomineralization. We also show that these changes do not occur when Asp and Glu are replaced in the n16N sequence with Asn and Gln, respectively, demonstrating that carboxyl groups in Asp and Glu do participate in polypeptide-mineral molecular associations.     

Empirical study and prediction of liquids retention on structured polymer surfaces

Liquids' contact angle hysteresis and critical retention volumes on five commonly used plastics with surface structures were studied. The chevron‐like groove structures, which are orthogonally arranged, make the liquid–solid contact line elongated while the droplet found staying in the Wenzel state. Various dimensions of surface structures were represented by contact length ratio σ. Advancing and receding contact angles of liquids on polymer surfaces with various conditions were reported. Reduced hysteresis H, which links between advancing and receding contact angles, was also studied and found to extend its availability on structured surfaces. The research found that surface structures have linear effects on liquids' advancing contact angles in the range of σ = 1.0 to 1.42. Linear regression analysis was hence proposed to predict advancing contact angles, and the results indicate that approximate 80% of data points have less than 6% error. An empirical model, which adopts liquid–solid surface tension as the source of liquids' retention force, was proposed to estimate liquids' critical retention volumes on inclined surfaces. The proposed model found good agreements with existing experiment data and demonstrated its superiority over previous ones. The present model provides an approach to predict liquids' storage/repellency on structured surfaces when the advancing contact angles are predictable. Copyright © 2016 John Wiley & Sons, Ltd.