Production of l-DOPA by tyrosinase immobilized on modified polystyrene

Mushroom tyrosinase was immobilized on modified polystyrene—polyaminostyrene (PSNH) and polymethylchloridestyrene (PSCL)—to produce l-DOPA from l-tyrosine. Glutaraldehyde was used as an activating agent for the PSNH to immobilize the tyrosinase and 10% (w/v) glutaraldehyde was optimal in conferring the highest specific activity (11.96 U/g) to the PSNH. Methylchloride on the PSCL was directly linked with the tyrosinase, and 1.5 mmol of Cl/g was optimal in attaining the specific activity of 17.0 U/g. The temperature and optimal acidity were, respectively, 60°C and pH 5.5 for the PSNH, and 70°C and pH 3.0 for the PSCL. In a 50-mL batch reactor working over 36 h, the l-DOPA production rate at 30°C was 1.44 mg/(L·h) for the PSNH and 2.33 mg/(L·h) for the PSCL. The production rate over 36 h was 3.86 mg/(L·h) for the PSNH at 60°C and 5.54 mg/(L·h) for the PSCL at 70°C. Both of the immobilized enzymes showed a remarkable stability with almost no change in activity after being stored wet. The operational stability study indicated a 22.4% reduction in l-DOPA production for the PSNH and an 8.63% reduction for the PSCL over seven runs (each run was for 144h at 30°C) when the immobilized enzymes were used under turnover conditions. The immobilized tyrosinase was more stable on the PSCL than on the PSNH.     

A hybrid approach for optimal design of signalized road network

For a signalized road network with expansions of link capacity, the maximum possible increase in travel demands is considered while total delays for travelers are minimized. Using the concept of reserve capacity of signal-controlled junctions, the problem of finding the maximum possible increase in travel demand and determining optimal link capacity expansions can be formulated as optimization programs. In this paper, we present a new solution approach for simultaneously solving the maximum increase in travel demands and minimizing total delays of travelers. A projected Quasi-Newton method is proposed to effectively solve this problem to the KKT points. Numerical computations and comparisons are made on real data signal-controlled networks where obtained results outperform traditional methods.     

Multipoint parallel excitation and CCD-based imaging system for high-throughput fluorescence detection of biochip micro-arrays

We report the development and the characterization of a multipoint parallel excitation and CCD-based imaging system for high-throughput fluorescence detection of biochip micro-arrays. A two-dimensional array of (19×19) points with uniform intensity distribution, generated by a holographic array generator, was used for parallel excitation of two-dimensional micro-arrays of fluorescence samples. A CCD-based imaging system was used for high-throughput parallel detection and quantitative analysis of the fluorescence output. Micro-array samples of cyanine (Cy5) dye dots on silicon wafers and on glass substrates with varying concentration were used to evaluate the performance of the system. Results of fluorescence intensity measurements with varying concentration of dye and with different image acquisition time are presented. We have demonstrated that this novel approach will, in general, outperform the conventional approach in the excitation efficiency, the signal-to-noise ratio, and the throughput. The limitations and the potential improvements of the present method are discussed.     

Synergistic antitumor effect of curcumin and dinitrosyl iron complexes for against melanoma cells

The aim of this study was to examine whether combining curcumin, a chemoprevention agent, and dinitrosyl iron complexes (DNICs) would have a synergistic cytotoxic effect on mouse melanoma B16-F10 cells in vitro. Three synthesized DNICs-[PPN] [(NO)₂Fe(SCH₂CONHCH₃)₂] (NC01), [PPN] [(NO)₂Fe(SCH₂CON(CH₃)₂)₂] (NC02), and [Na][(NO)₂Fe(SCH₂CON(CH₃)₂)₂] (NC03) were tested in this study. In vitro DNA cleavage assay showed all three DNICs could cause plasmid DNA damage through releasing NO under UV irradiation. The cytotoxicity assay demonstrated these DNICs were toxic to B16-F10 cells in vitro, and the estimated values of LD₅₀ (24 h of incubation) of NC01 and NC02 were 1 μM, while the values of LD₅₀ of NC03 was 200 μM. No synergistic cytotoxicity effect was noted in the treatments of the combinations of curcumin and DNICs. On the contrary, in the presence of NC03, the toxicity of curcumin was reduced. Using UV-Visible spectroscopy and fluorescence microscopy, we found NC03 might interact with curcumin and reduce the accumulation of curcumin in cells. Further experiments using the pretreatment of curcumin for 4 h followed by the treatment of NC03 showed the synergistic cytotoxic effect, while, the pretreatment of NC03 followed by the treatment of curcumin did not have any effect. This study provides the basis for further investigation on the effects of combinations of curcumin and other NO donors.     

The characterization of Cr secondary oxide phases in ZnO films studied by X-ray spectroscopy and photoemission spectroscopy

X-ray absorption near-edge structure (XANES), X-ray emission spectroscopy (XES), and X-ray photoemission spectroscopy (XPS) were used to characterize the Cr secondary oxide phases in ZnO films that had been prepared using a co-sputtering method. Analysis of the Cr L_3,2-edge XANES spectra reveals that the intensity of white-line features decreases subtly as the sputtering power increases, indicating that the occupation of Cr 3d orbitals increases with Cr concentration in (Zn, Cr)O films. The O K-edge spectra show that the intensity of XANES features of (Zn, Cr)O films is lower than those of ZnO film, suggesting enhanced occupation of O 2p-derived states through O 2p-Cr 3d hybridization. The XES and XPS spectra indicate that the line shapes in the valence band of (Zn, Cr)O films are quite different from those of ZnO and that the Cr₂O₃ phase dominates the spinel structure of (Zn, Cr)O films increasingly as the Cr sputtering power is increased. Over all results suggest that the non-ferromagnetic behavior of (Zn, Cr)O films can be attributed to the dominant presence of Cr₂O₃, whereas the bulk comprise phase segregations of Cr₂O₃ and/or ZnCr₂O₄, which results them the most stable TM-doped ZnO material against etching.     

Rhodamine‐Ethylenediol,A Novel Vital Fluorescent Probe for Labelling Alkaline Phosphatase‐Rich Organelles

Zebrafish have received considerable attention as an organism‐based model in the development of pharmacological agents.^1,2 Many small molecules applied to zebrafish show important behaviours and may constitute new kinds of markers for clinical purposes.³ Analysis of these molecules can facilitate the development of useful tools for monitoring environmental changes.⁴ Many chemicals that are toxic to the environment are known to influence the sensory systems of humans⁵ and fish.⁶ One important sensory system in all fish is the lateral line organ,⁷ which is readily accessible for the assessment of environmental changes.⁸ Neuromasts, which are located on the surface of the fish body, are one of the major components of the lateral lines of the zebrafish.⁹ Copper‐enriched water is known to affect the olfactory system in fish. Therefore, small molecules that induce specific patterns in the neuromasts of zebrafish should provide an important animal model with which to explore the effects of environmental changes on the sensory system.^10,11 Recently, chemical sensors based on the rhodamine skeleton¹² have been designed to specifically detect metal ions, such as Cu(II)¹³ and Fe(III)/Hg(II),¹⁴ in zebrafish. However, there has been no report of these rhodamine derivatives used in the specific recognition of the sensory system of zebrafish. Commonly, the sensory system is studied with antibody staining assays of scarified fish. Here, we report that a new rhodamine derivative can be used as a fluorescent chemical probe to visualize the neuromasts and intestinal villi of living zebrafish. Based on the specific recognition of this area in zebrafish, we narrowed the possible enzymes targeted by this rhodamine probe to alkaline phosphatase and confirmed this with a binding assay. It is a well‐recognized challenge to develop a fluorescent chemical probe that specifically recognizes a particular enzyme. Furthermore, the transfer of phosphate groups to certain enzymes can activate their catalytic reactivity, triggering a cascade reaction in a signal transduction pathway. The alkaline‐phosphatase‐specific recognition by this rhodamine derivative may be applicable to clinical purposes.     

Exact stability regions for quartic polynomials

Given an arbitrary real quartic polynomial, we find the exact region containing the coefficients of the polynomial such that all roots have absolute values less than 1.     

Error analysis of the L2 least‐squares finite element method for incompressible inviscid rotational flows

In this article we analyze the L² least‐squares finite element approximations to the incompressible inviscid rotational flow problem, which is recast into the velocity‐vorticity‐pressure formulation. The least‐squares functional is defined in terms of the sum of the squared L² norms of the residual equations over a suitable product function space. We first derive a coercivity type a priori estimate for the first‐order system problem that will play the crucial role in the error analysis. We then show that the method exhibits an optimal rate of convergence in the H¹ norm for velocity and pressure and a suboptimal rate of convergence in the L² norm for vorticity. A numerical example in two dimensions is presented, which confirms the theoretical error estimates. © 2004 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2004     

Thermomechanical behavior of underfill/solder mask/substrate interface under thermal cycling

With the increasing application of flip-chip technology in the microelectronics industry, the adhesion strength of interfaces in flip-chip microelectronic structures has become an important issue for manufacturing and operation. In this paper we present an experimental investigation of the adhesive strength of underfill material to solder mask coated FR-4 substrate under thermal cycling. The effects of the number of thermal cycles on interfacial strength were investigated by using the button shear test. The relationship between interfacial strength and the thickness of solder mask was also examined. Furthermore, the morphologies of fracture surfaces of the test specimens were analyzed by scanning electron microscopy. The results of this study show that the interfacial strength of the underfill/solder mask/substrate joint was significantly reduced by thermal fatigue. Finally, the degradation behavior and possible mechanisms were then determined on the basis of these observations.