Protein—Protein Interactions in Aqueous Ammonium Sulfate Solutions. Lysozyme and Bovine Serum Albumin (BSA)

Osmotic pressures have been measured to determine lysozyme—lysozyme,BSA—BSA, and lysosyme—BSA interactions for protein concentrations to 100 g-L^–1in an aqueous solution of ammonium sulfate at ambient temperature, as a functionof ionic strength and pH. Osmotic second virial coefficients for lysozyme, forBSA, and for a mixture of BSA and lysozyme were calculated from theosmotic-pressure data for protein concentrations to 40 g-L^–1. The osmotic second virialcoefficient of lysozyme is slightly negative and becomes more negative withrising ionic strength and pH. The osmotic second virial coefficient for BSA isslightly positive, increasing with ionic strength and pH. The osmotic second virialcross coefficient of the mixture lies between the coefficients for lysozyme andBSA, indicating that the attractive forces for a lysozyme—BSA pair areintermediate between those for the lysozyme—lysozyme and BSA—BSA pairs. For proteinconcentrations less than 100 g-L^–1, experimental osmotic-pressure data comparefavorably with results from an adhesive hard-sphere model, which has previouslybeen shown to fit osmotic compressibilities of lysozyme solutions.     

Calix[4]arenes Bridged with Two Different Crown Ether Loops: Influence of Crown Size on Metal Ion Recognition

A series of calix[4]arene-bis-crownethers were synthesized in a fixed 1,3-alternateconformation with good yields by the reaction of amonocyclic calixcrown ether with multi-ethyleneglycoldi-p-toluenesulfonate in the presence of cesiumcarbonate. In the preparation of the monocycliccalixcrown ethers (1 and 2), the use ofpotassium carbonate as a base provided the best yieldregardless of the template concept. In two phaseextraction and competitive transport experiments forligand-metal complexation, calix[4]arene biscrown(5) provided the best selectivity for potassiumion. When a calixbiscrown ether (4) bearingdifferent sized crown ether loops coordinates to K⁺and Cs⁺, respectively, the changes of peak splittingpatterns and chemical shift on ¹H NMR spectra aredependent on the complexed metal ion species.     

Gas chromatography‐mass spectrometric method for the screening and quantification of illicit drugs and their metabolites in human urine using solid‐phase extraction and trimethylsilyl derivatization

A simple and rapid GC‐MS method has been developed for the screening and quantification of many illicit drugs and their metabolites in human urine by using automatic SPE and trimethylsilylation. Sixty illicit drugs, including parent drugs and their metabolites that are possibly abused in Korea, can be monitored by this method. Among them, 24 popularly abused illicit drugs were selected for quantification. Very delicate optimizations were carried out in SPE, trimethylsilylation derivatization, and GC/MS to enable such remarkable achievements. Trimethylsilylated analytes were well separated within 21 min by GC‐MS. In the validation results, the LOD of all the analytes were in the range of 2–75 ng/mL. The LOQ of the quantified analytes were in the range of 5–98 ng/mL. The linearity (r²) of the quantified analytes ranged 0.990–1.000 in each concentration range between 10 and 1000 ng/mL. The mean recoveries ranged from 62 to 126% at three different concentrations of each analyte. The inter‐day and inter‐person accuracies were within ?13.3～14.9%, and ?10.1～13.0%, respectively, and the inter‐day and inter‐person precisions were less than 12.9%. The method was reliable and efficient for the screening and quantification of abused illicit drugs in routine urine analysis.     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

Synthesis and properties of phenothiazylene vinylene‐based polymers: New organic semiconductors for field‐effect transistors and solar cells

A series of new phenothiazylene vinylene‐based semiconducting polymers, poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene] ( P1 ), poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐1,4‐phenylene vinylene] ( P2 ), and poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐2,5‐thienylene vinylene] ( P3 ), have been synthesized via a Horner‐Emmons reaction. FTIR and ¹H NMR spectroscopies confirmed that the configurations of the vinylene groups in the polymers were all‐trans (E). The weight‐averaged molecular weights (M_w) of P1 , P2 , and P3 were found to be 27,000, 22,000, and 29,000, with polydispersity indices of 1.91, 2.05, and 2.25, respectively. The thermograms for P1 , P2 , and P3 each contained only a broad glass transition, at 129, 167, and 155 °C, respectively, without the observation of melting features. UV–visible absorption spectra of the polymers showed two strong absorption bands in the ranges 315–370 nm and 450–500 nm, which arose from absorptions of the phenothiazine segments and the conjugated main chains. Solution‐processed field‐effect transistors fabricated from these polymers showed p‐type organic thin‐film transistor characteristics. The field‐effect mobilities of P1 , P2 , and P3 were measured to be 1.0 × 10^?4, 3.6 × 10^?5, and 1.0 × 10^?3 cm² V^?1 s^?1, respectively, and the on/off ratios were in the order of 10² for P1 and P2 , and 10³ for P3 . Atomic force microscopy and X‐ray diffraction analysis of thin films of the polymers show that they have amorphous structures. A photovoltaic device in which a P3 /PC₇₁BM (1/5) blend film was used as the active layer exhibited an open‐circuit voltage (V_OC) of 0.42 V, a short circuit current (J_SC) of 5.17 mA cm^?2, a fill factor of 0.35, and a power conversion efficiency of 0.76% under AM 1.5 G (100 mW cm^?2) illumination. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 635–646, 2010     

Surface molecular degradation of 3D glass polymer composite under low earth orbit simulated space environment

Epoxy resin reinforced with 3D parabeam glass fibre was subjected to low earth orbit (LEO) simulation conditions comprising ultra high vacuum, temperature cycling (TC), and ultraviolet (UV) radiation and atomic oxygen (AO) bombardment. Inspection of the same composite using only a selection of these hazardous conditions provided comparison measures to identify the effect of each condition on the surface degradation of the resin composite. Each of the individually selected conditions showed a different degradation mechanism that is accelerated by the presence of other conditions. X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and scanning electron microscopy (SEM) were used to provide surface information. The resin composite samples suffered surface oxidation that increased the oxygen content to 17.24% in comparison with the untreated sample (only 14.2%). The samples that were treated with AO showed higher C-O and CO functional groups on the surface in comparison with the rest of the samples (as indicated by XPS). Molecular information (from ToF-SIMS) showed that surface oxidation differs with different conditions and in comparison with the use of all conditions. All treated samples were shown to suffer significant chain scission and loss of volatiles as a result of the LEO conditions. The extent of the chain scission reaction for each condition can be indicated by the extent of the reduction of the relative concentration of the aliphatic hydrocarbon ions. The relative intensity of the C₄H₁₁N₄O₂⁺ ion showed that AO bombardment accelerated the oxidation of the surface. The AO effect is doubled when UV and TC are also present. SEM results indicated that sample surfaces were eroded and roughened upon exposure to LEO conditions. Presence of AO and UV in the LEO conditions introduced white deposits onto the surface, believed to be crosslinked formations.     

First synthesis of 2′-oxabicyclo[3.1.0]hexyl nucleosides with a north conformation

The first synthesis of 2′-oxabicyclo[3.1.0]hexyl nucleosides, a novel class of bicyclonucleosides, with a north conformation was successfully accomplished starting from (S)-epichlorohydrin via a tandem alkylation-lactonization, a less steric hindrance-dependent silylation in equilibrium and a coupling reaction with nucleobases under Vorbruggen conditions. Addition of acetic acid prevented a benzoyl group from migrating during desilylation with TBAF. ¹H NMR and X-ray crystallographic analysis indicated that the anomeric effect worked on the β-2′-oxabicyclo[3.1.0]hexyl nucleosides.     

Aspirin attenuates the anti-inflammatory effects of theophylline via inhibition of cAMP production in mice with non-eosinophilic asthma

Theophylline is commonly used to treat severe asthma and chronic obstructive pulmonary disease (COPD) characterized by non-eosinophilic inflammation. Acetyl salicylic acid (ASA) is one of the most widely used medications worldwide, but up to 20% of patients with asthma experience aggravated respiratory symptoms after taking ASA. Here we evaluated the adverse effect of ASA on the therapeutic effect of theophylline in mice with non-eosinophilic asthma. A non-eosinophilic asthma mouse model was induced by airway sensitization with lipopolysaccharide-containing allergen and then challenged with allergen alone. Therapeutic intervention was performed during allergen challenge. Theophylline inhibited lung inflammation partly induced by T_h1 immune response. ASA attenuated the beneficial effects of theophylline. However, co-administration of the ASA metabolite salicylic acid (SA) showed no attenuating effect on theophylline treatment. The therapeutic effect of theophylline was associated with increase in cAMP levels, which was blocked by co-treatment of theophylline and ASA. ASA co-treatment also attenuated the anti-inflammatory effects of a specific phosphodiesterase 4 inhibitor. These results demonstrate that ASA reverses anti-inflammatory effects of theophylline, and that ASA exerts its adverse effects through the inhibition of cAMP production. Our data suggest that ASA reverses lung inflammation in patients taking theophylline, although clinical evidence will be needed.