Efficient oxidation of benzylic alcohols with [hydroxy(tosyloxy)iodo]benzene under microwave irradiation

An efficient method for the oxidation of benzylic alcohols with [hydroxy(tosyloxy)iodo]benzene under solvent-free microwave irradiation conditions is described.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

p21Cip/WAF1 activation is an important factor for the ERK pathway dependent anti-proliferation of colorectal cancer cells

p21Cip/WAF1, an important regulator of cell proliferation, is induced by both p53- and extracellular signal regulated kinase (ERK) pathways. The induction of p21Cip/WAF1 occurs by prolonged activation of the ERKs caused by extracellular stimuli, such as zinc. However, not all the cells appeared to respond to ERK pathway dependent p21Cip/WAF1 induction. Here we investigated the cause of such difference using colorectal cancer cells. p21Cip/WAF1 induction and concomitant reduction of bromodeoxyuridine (BrdU) incorporation were observed by zinc treatment within HT-29 and DLD-1. However, HCT-116 cells with high endogenous p21Cip/WAF1 levels did not show any additional increment of p21Cip/WAF1 levels by zinc treatment and did maintain high BrdU incorporation level. The p21Cip/WAF1 induction by zinc depended upon prolonged activation of extracellular signal regulated kinase (ERK) was not observed in HCT-116 cells. The percentage of BrdU positive cells was 50% higher in p21Cip/WAF1 -/- HCT-116 cells compared to p21Cip/WAF1 +/+ HCT- 116 cells, and no cells induced p21Cip/WAF1 incorporated BrdU in its nucleus, yet confirming the importance of p21Cip/WAF1 induction in anti- proliferation. These results again support that p21Cip/WAF1 induction is a determinant in the regulation of colonic proliferation by the ERK pathway.     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Interleukin-1beta stimulates matrix metalloproteinase-2 expression via a prostaglandin E2-dependent mechanism in human chondrocytes

IL-1beta is known promote cyclooxygenase-2 (COX- 2) and matrix metalloproteinase-2 (MMP-2) expression. This study focuses on the characterization of the signaling cascade associated with IL-1beta-induced matrix metalloproteinase-2 (MMP-2) regulation in human chondrocytes. The decrease in collagen levels in the conditioned media was prevented by a broad spectrum MMP inhibitor, suggesting that IL-1beta promotes the proteolytic process leading to MMP-2 activation. IL-1beta-related MMP-2 expression was found to be dependent on prostaglandin E2 (PGE2) production. In addition, the induction of COX-2 and MMP-2 was inhibited by the pretreatment of chondrocytes with a SB203580 or Ro 31-8220, indicating the involvement of protein kinase C (PKC) or p38 mitogen-activated protein kinase (MAPK). However, there is no cross-talk between PKC and p38 MAPK in the IL-1beta-induced MMP-2 activation. Taken together, these results demonstrated that IL-1beta induces MMP-2 expression through the PGE2-dependent mechanism in human chondrocytes.     

Octasilsesquioxane Chemistry II. Hydrosilylation Reaction of Octa(hydrido)silsesquioxane with Unsaturated Substrates and Product Properties

The hydrosilylation reaction of octa(hydrido)silsesquioxane with ω‐halo‐1‐alkenes and other unsaturated substrates allows attachment of 8 long‐chain functionalized alkyls on the cubic Si₈O₁₂ skeleton. Pt/C and H₂PtCl₆ have been adopted as the catalysts, the yields being 74–98% for compounds 2–9 . For terminal alkenes, the hydrosilylation follows the anti‐Markonikov's rule. The morphological state of 2–9 ranges from viscous liquid to crystalline materials. The pyrolysis results indicate that 7 , a material of hard spherical core and soft flexible shell, may likely act as nanometer‐size ball bearings up to more than 400 °C. The X‐ray structure of 9 reveals that the molecule is required to possess a center of symmetry crystallographically. The linear arms on 9 , except for two of them, are virtually all‐trans in conformation, not counting the ω‐C‐Cl bond.     

Computational study of conformational preferences of thioamide-containing azaglycine peptides

The effect of thioamide substitution on the conformational stability of an azaglycine-containing peptide, For-AzaGly-NH2 (1), was investigated for the sake of finding possible applications by using ab initio and DFT methods. As model compounds, For-[psiCSNH]-AzaGly-NH2 (2), For-AzaGly-[psiCSNH]-NH2 (3), and For-[psiCSNH]-AzaGly-[psiCSNH]-NH2 (4) were used. Two-dimensional phi-psi potential energy surfaces (PESs) for 2-4 were calculated at the B3LYP/6-31G*//HF/6-31G* level in gas (epsilon = 1.0) and in water (epsilon = 78.4) by applying the isodensity polarizable continuum model (IPCM) method. On the basis of these PESs, the minimum energy conformations for 2-4 were characterized at the B3LYP level with 6-31G*, 6-311G**, and 6-31+G** basis sets. The remarkable structural effect of thioamide substitution for 2-4 is that beta-strand structure is observed as a global or local minimum. The minima of 2-4 are also compared with those for glycine and thioamide-containing glycine peptides. Our theoretical results demonstrate that compounds 2-4 would be used to design controllable secondary structures.