Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

The Use of Various Chromatographic Techniques for the Determination of Phenylurea Herbicides and Their Corresponding Anilines in Environmental Samples,II. Applications

Abstract

In earlier work, various strategies have been developed for the trace-level determination of phenylurea herbicides and the anilines which are their main degradation products. They include catalytic hydrolysis of the phenylureas on silica, liquid chromatographic fractionation of complex mixtures of herbicides and anilines, derivatization of anilines and herbicides with electron-capture-sensitive reagents, and final analysis by means of capillary gas chromatography. In the present paper, the application of these principles to trace-level analysis of surface water, soil and crop samples is demonstrated.     

Complex Forming Ability of a Family of Isolated Cyclosophoraoses with Ergosterol and Its Monte Carlo Docking Computational Analysis

Neutral cyclosophoraoses (unbranched cyclic -1,2-d-glucans) produced by the Rhizo-bium meliloti 2011 were prepared by size exclusion and anion-exchange chromatographic techniques. The degree of polymerization (DP) of isolated cyclosophoraoses was determined by matrix associated laser desorption/ionization mass spectrometry (MALDI/MS) techniques. A family of purified neutral cyclosophoraoses (DP 17–27) was used as a host for the inclusion complexation with hardly soluble ergosterol. High performance liquid chromatographic (HPLC) analysis showed that it induced much enhanced solubility of ergosterol compared to -cyclodextrin. In order to understand the molecular basis of the complex forming ability of cyclosophoraoses, a Monte Carlo (MC) docking-minimization method was used for host-guest complex formation of cyclosophoraoses or -cyclodextrin with ergosterol. From the MC simulation we propose the `hand-shake' mechanism for complexation of cyclosophoraoses with ergosterol.     

Calix[4]arenes Bridged with Two Different Crown Ether Loops: Influence of Crown Size on Metal Ion Recognition

A series of calix[4]arene-bis-crownethers were synthesized in a fixed 1,3-alternateconformation with good yields by the reaction of amonocyclic calixcrown ether with multi-ethyleneglycoldi-p-toluenesulfonate in the presence of cesiumcarbonate. In the preparation of the monocycliccalixcrown ethers (1 and 2), the use ofpotassium carbonate as a base provided the best yieldregardless of the template concept. In two phaseextraction and competitive transport experiments forligand-metal complexation, calix[4]arene biscrown(5) provided the best selectivity for potassiumion. When a calixbiscrown ether (4) bearingdifferent sized crown ether loops coordinates to K⁺and Cs⁺, respectively, the changes of peak splittingpatterns and chemical shift on ¹H NMR spectra aredependent on the complexed metal ion species.     

Resolution optimisation in micellar electrokinetic chromatography using empirical models

Theoretical and empirical models can be used to model the migration or separation characteristics in micellar electrokinetic chromatography in order to optimise the resolution. In this paper only empirical models were used, because it is easier and more straightforward to obtain these models. Several empirical approaches for the optimisation of the resolution were compared in order to determine which response should be modelled preferably. The use of models of the effective mobility in combination with average plate numbers proved to be the most suitable approach to optimisation of the resolution, because the relative prediction errors of the models of the effective mobility were a factor of 2-4 smaller than the relative prediction errors of the models of the apparent mobility. Moreover for the least separated peak pair the resolutions based on the models of the apparent and effective mobility showed relative prediction errors that were approximately a factor of 2 smaller than the relative prediction errors of the resolutions based on the models of the resolution and separation factor. The predictions of the separation factor based on the different models generally showed lower prediction errors than the predictions of the corresponding resolutions. Although the relative prediction errors were large, particularly for closely migrating compounds, the empirical approach will probably lead to the optimum separation buffer composition.     

Capillary electrochromatography of basic compounds using octadecyl-silica stationary phases with an amine-containing mobile phase

The capillary electrochromatographic (CEC) analysis of basic compounds on octadecyl-silica stationary phases (Hypersil ODS and Spherisorb ODS I) was studied. A basic drug (fluvoxamine) and one of its possible impurities were used as test compounds. With an eluent of acetonitrile-phosphate buffer (pH 7.0), the compounds could be baseline-separated; however, broad and tailing peaks were obtained. To minimise detrimental interactions with residual silanol groups, the pH of the mobile phase was lowered to 2.5, but the plate numbers were still quite low (<2.6x10(4) plates/m). Addition of a masking agent (hexylamine or triethylamine) to the mobile phase resulted in much better peak efficiencies (ca. 1x10(5) plates/m). Therefore, the influence of the amine concentration and pH of the mobile phase on the CEC performance (peak width, peak tailing, electroosmotic flow, selectivity) was investigated in detail. Highest efficiencies (2.8x10(5) plates/m) could be obtained with the Spherisorb column, while the Hypersil column offered a better selectivity. Furthermore, the results show that the residual silanol groups are (at least partly) responsible for the separation of the basic compounds and that the amount of injected sample has an unusually large effect on the peak efficiency. The usefulness of the system for impurity profiling was demonstrated with a mixture containing fluvoxamine and its stereoisomer (a possible impurity) at the 0.1% level. The general effectiveness of amine additives in CEC was illustrated by the separation of a mixture of five structurally different basic drugs yielding plate numbers in the 1x10(5)-3x10(5) plates/m range. Comparison with capillary electrophoretic analysis revealed a unique selectivity of the CEC system which is based on both electrophoretic mobility and chromatographic partitioning.     

Large Porphyrin Squares from the Self‐Assembly of meso‐Triazole‐Appended L‐Shaped meso–meso‐Linked ZnII–Triporphyrins: Synthesis and Efficient Energy Transfer

meso‐Triazolyl‐appended Zn^II–porphyrins were readily prepared by Cu^I‐catalyzed 1,3‐dipolar cycloaddition of benzyl azide to meso‐ethynylated Zn^II–porphyrin (click chemistry). In noncoordinating CHCl₃ solvent, spontaneous assembly occurred to form tetrameric array ( 3 )₂ from meso–meso‐linked diporphyrins 3 , and dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ from the L ‐shaped meso–meso‐linked triporphyrins 4 and 5 . The structures of these assemblies were examined by ¹H NMR spectra, absorption spectra, and their gel permeation chromatography (GPC) retention time. Furthermore, the structures of the dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ were probed by small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) measurements in solution using a synchrotron source. Excitation‐energy migration processes in these assemblies were also investigated in detail by using both steady‐state and time‐resolved spectroscopic methods, which revealed efficient excited‐energy transfer (EET) between the meso–meso‐linked Zn^II–porphyrin units that occurred with time constants of 1.5 ps^?1 for ( 3 )₂ and 8.8 ps^?1 for ( 5 )₄.     

Stabilization of the Charge‐Separated States of Covalently Linked Zinc Porphyrin–Triphenylamine–[60]Fullerene

Spectroscopic, redox, computational, and electron transfer reactions of the covalently linked zinc porphyrin–triphenylamine–fulleropyrrolidine system are investigated in solvents of varying polarity. An appreciable interaction between triphenylamine and the porphyrin π system is revealed by steady‐state absorption and emission, redox, and computational studies. Free‐energy calculations suggest that the light‐induced processes via the singlet‐excited porphyrin are exothermic in benzonitrile, dichlorobenzene, toluene, and benzene. The occurrence of fast and efficient charge‐separation processes (≈10¹² s^?1) via the singlet‐excited porphyrin is confirmed by femtosecond transient absorption measurements in solvents with dielectric constants ranging from 25.2 (benzonitrile) to 2.2 (benzene). The rates of the charge separation processes are much less solvent‐dependent, which suggests that the charge‐separation processes occur at the top region of the Marcus parabola. The lifetimes of the singlet radical‐ion pair (70–3000 ps at room temperature) decrease substantially in more polar solvents, which suggests that the charge‐recombination process is occurring in the Marcus inverted region. Interestingly, by utilizing the nanosecond transient absorption spectral technique we can obtain clear evidence about the existence of triplet radical‐ion pairs with relatively long lifetimes of 0.71 μs (in benzonitrile) and 2.2 μs (in o‐dichlorobenzene), but not in toluene and benzene due to energetic considerations. From the point of view of mechanistic information, the synthesized zinc porphyrin–triphenylamine–fulleropyrrolidine system has the advantage that both the lifetimes of the singlet and triplet radical‐ion pair can be determined.     

Formation of Metal‐Assisted Stable Double Helices in Dimers of Cyclic Bis‐Tetrapyrroles that Exhibit Spring‐Like Motion

Bidipyrrin‐bridged macrocycles, prepared from Ni^II‐bridged dipyrrin‐based nanorings by intramolecular oxidative biaryl coupling reactions, yielded [2+4]‐type Zn^II‐assisted stable twisted‐ring dimers comprising two double helices. These [2+4]‐type metal complexes can be optically resolved by chiral HPLC and exhibit tunable electronic and optical properties as a result of spring‐like motions. The double helices behave as glue to connect two macrocycles and as the screws of hinges to form thermally responsive synchronized spring systems.