Combined effects of clay modifications and compatibilizers on the formation and physical properties of melt‐mixed polypropylene/clay nanocomposites

The melt mixing technique was used to prepare various polypropylene (PP)‐based (nano)composites. Two commercial organoclays (denoted 20A and 30B) served as the fillers for the PP matrix, and two different maleated (so‐called) compatibilizers (denoted PP‐MA and SMA) were employed as the third component. The results from X‐ray diffraction (XRD) and transmission electron microscope (TEM) experiments revealed that 190 °C was an adequate temperature for preparing the nanocomposites. Nanocomposites were achieved only if specific pairs of organoclay and compatibilizer were simultaneously incorporated in the PP matrix. For example, PP/20A(5 wt %)/PP‐MA(10 wt %) and PP/30B(5 wt %)/SMA(5 wt %) composites exhibited nanoscaled dispersion of 20A or 30B in the PP matrix. Differential scanning calorimetry (DSC) results indicated that the organoclays served as nucleation agents for the PP matrix. Generally, their nucleation effectiveness increased with the addition of compatibilizers. The thermal stability enhancement of PP after adding 20A was confirmed with thermogravimetric analysis (TGA). The enhancement became more evident as a suitable compatibilizer was further added. However, for the 30B‐included composites, thermal stability enhancement was not evident. The dynamic mechanical properties (i.e., storage modulus and loss modulus) of PP increased as the nanocomposites were formed; the properties increment corresponded to the organoclay dispersion status in the matrix. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4139–4150, 2004     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Unique structural properties of the Mg-Al hydrotalcite solid base catalyst: an in situ study using Mg and Al K-edge XAFS during calcination and rehydration

The changes in the layered structure of Mg-Al hydrotalcite (Mg/ Al = 2) during heat treatment have been investigated by using in situ XAFS simultaneously at the Mg and Al K-edges. The development of unique in situ instrumentation allowed the coordination environments at both the Mg and Al centers to be monitored as a function of the temperature and heat treatment. The results of this study show that the hydrotalcite structure is highly flexible, and should lead to the further development of hydrotalcites as new solid basic catalysts. Moreover, the Mg and Al cations in the cation layers show different behavior as a function of temperature. The coordination of some octahedral Al ions decreases already at a temperature of 425 K, whereas the coordination about Mg does not show any modification at this temperature. However, hydrotalcite treated at 425 K, followed by cooling down to room temperature resulted in a complete reversal to the original octahedral Al coordination. It is proposed that Al-OH bond breakage occurs at 425 K, without the evolution of H2O. This bond is restored after cooling to room temperature. The actual dehydroxylation of hydrotalcite commences between 425 and 475 K, as indicated by a change in coordination of both the Mg and Al centers. This is accompanied by the evolution of H2O molecules and the changes are hence irreversible without the presence of excess water. Heat treatment at 725 K leads to the development of an MgO-like phase (octahedral Mg) and a mixed octahedral/tetrahedral Al phase. A subsequent rehydration at room temperature entirely restores the original coordination about the Al and Mg centers of hydrotalcite to a distance of 15 A, to which XAFS spectroscopy is sensitive.     

Feature based fuzzy matching of 2D gel electrophoresis images

Automatic alignment (matching) of two-dimensional gel electrophoresis images is of primary interest in the evolving field of proteomics. In the present study, feature-based matching techniques, in their classical and robust versions, are described, and an automatic method of fuzzy alignment (FA) is introduced. This method allows automatic matching of two gel images with different numbers of features with unknown correspondence. Performance of FA is tested on simulated and real data sets.     

Conformation and chiroptical properties of mandelic acids

Using CD data (solution, solid state, various temperatures), X-ray data and MO calculations for a number of substituted mandelic acids (phenylglycolic acids) an attempt was made to explain the different results for the relation between sign of the ¹L_b CD band and substitution pattern as described in the literature for various types of aromatic compounds. Moreover the reported sector rule has been reconsidered taking into account the sign and magnitude of the spectroscopic moments. It has been found that in any explanation of the signs of the ¹L_b CD bands of substituted aromatic compounds both the conformational behaviour and the spectroscopic moments should be taken into account.     

Liquid-liquid extraction of cadmium(II) from aqueous thiocyanate solutions with liquid anion-exchangers

An investigation has been made on the system liquid anion-exchanger-Cd(II)-NCS⁻. The influence of the acidity and thiocyanate concentration of the aqueous phase on the extraction has been studied. Using various methods of analysis, it has been shown that the complex anion present in the organic extracts is Cd(NCS) ₄ ²⁻ . Details are given concerning the removal of traces of Zn(II) from Cd(II)-containing solutions, and the quantitative separation of Cd(II) from Cr(III).     

Dye-sensitized solar cells based on composite solid polymer electrolytes

The ionic conductivity of polymer electrolytes and their interfacial contact with dye-attached TiO2 particles were enhanced markedly by the addition of amorphous oligomer into polymer electrolytes, resulting in very high overall energy conversion efficiency.     

Self-assembling structures of long-chain phenyl glucoside influenced by the introduction of double bonds

Four long-chain phenyl glucoside amphiphiles possessing a saturated or unsaturated long alkyl chain group as the self-assembling unit of a highly organized molecular architecture were synthesized. Their self-assembling properties were investigated by EF-TEM, SEM, CD, FT-IR, and XRD. Compound 2 possessing one double bond in the lipophilic portion showed twisted helical fibers, which formed a bilayered structure with a 3.59 nm period, while compound 3 showed the helical ribbons and left-handed nanotubular structures with 150-200 nm inner diameters and ca. 20 nm of wall. Very interestingly, compound 4 possessing three double bonds showed a nanotubular structure with ca. 70 nm of inner diameter through a helical ribbon, which formed a loose bilayered structure with 4.62 nm. These results indicate that self-assembling properties strongly depend on the number of cis double bonds.     

Modified sampling and analysis method for large volatility range airborne polycyclic aromatic hydrocarbons (PAH) using gas chromatography-mass spectrometry

A sampling method has been developed for the measurement for polycyclic aromatic hydrocarbons in ambient air by gas chromatography isotope dilution mass spectrometry. The method has been designed to measure the largest possible volatility range of PAHs including the abundant naphthalenes. Sample volumes were approx. 500 m³ in size at a sampling rate of approx. 18 m³/h. The sampler contained three sorption stages for the simultaneous capturing of particle bound and low and high volatile gaseous PAH, respectivley. Recoveries of sampling spikes were on average 90%. The detection limit was approx. 5 pg/m³ for the high boiling range PAH. Results obtained showed a quite steady profile for most PAH in background air in The Netherlands. Comparison of abundance ratios with literature data indicate that traffic exhausts are the major source for the PAH in the area.