Trace-Level Determination of Phenol by Liquid Chromatography with On-Line Precolumn Technology and Fluorescence Detection

Abstract

A strongly basic anion-exchange resin is used for the trace enrichment and automated sample handling of phenol, with subsequent determination by reversed-phase liquid chromatography with fluorescence detection. Because of the presence of high concentrations of ionic compounds in the water samples tested, phenol is first trapped on a relatively long precolumn filled with a highly hydrophobic packing material; during this step, (in) organic anions which are not retained, are flushed to waste. In the next step, phenol is desorbed from this column at high pH and sorbed in a small zone (“peak compression”) on a short precolumn containing the anion exchanger.

In the analysis of tap and river water samples, the detection limit was found to be 10ppt (1:10¹¹).     

Molecular dynamics simulation study on graphene-nanoribbon-resonators tuned by adjusting axial strain

A tunable graphene-nanoribbon (GNR)-resonator was investigated via classical molecular dynamics simulations. Resonance frequencies increased with increasing externally applied gate-force and axial-strain, and could be tuned above several hundred GHz. Tunable resonance frequencies achieved from the gate force were higher than those achieved from the axial-strain. The operating frequencies of GNR-resonators without axial-strain or with small axial-strains were most widely tuned by the gate, and almost linearly increased with increasing mean deflection. As the axial strain increased, the tunable ranges of the GNR-resonators were exponentially decreased, although the operating frequencies increased. GNR-resonators without axial-strain could be applied to wide-range-tuners, whereas GNR-resonators with high axial-strain could be applied to high-frequency-fine-tuners.     

ESR Studies of λ-Irradiated Poly[3,3-bis(chloromethyl)oxetane]

Poly[3,3-bis(chloromethyl)] oxetane in vacuo, after λ-irradiation at 77°K and room temperature, showed ESR spectra consisting of a triplet (hfs of 22.0G) and a doublet (hfs of 17.8G), respectively. The triplet ESR spectrum is attributed to the -CH₂-C(CH₂Cl)-CH₂ -O- radical and the doublet ESR spectrum is attributed to the -CH₂-C(CH₂Cl)₂-CH-O- radical. The G values for formation of radicals are estimated to be 0.3 and 0.5 at 298 and 77°K, respectively.     

New discrimination method combining hit quality index based spectral matching and voting

A new discrimination method, called hit quality index (HQI)-voting, that uses the HQI for discriminant analysis has been developed. HQI indicates the degree of spectral matching between two spectra as known. In this method, a library sample yielding the highest HQI value for an unknown sample was initially searched and a group containing this sample was chosen as the group for the unknown sample. When overall spectral features of two groups are quite close to each other, many library samples with similar HQI values could be available for an unknown sample. In this situation, the simultaneous consideration of multiple votes (several library samples with close HQI values) for final decision would be more robust. In order to evaluate the discrimination performance of HQI-voting, three different near-infrared (NIR) spectroscopic datasets composed of two sample groups were used: (1) domestic and imported sesame samples, (2) domestic and imported Angelica gigas samples, and (3) diesel and light gas oil (LGO) samples. For the purpose of comparison, principal component analysis–linear discriminant analysis (PCA–LDA), partial least squares–discriminant analysis (PLS–DA) as well as k-nearest neighbor (k-NN) were also performed using the same datasets and the resulting accuracies were compared. The discrimination performances improved with the use of HQI-voting in comparison with those resulted from PCA–LDA and PLS–DA. The overall results support that HQI-voting is a comparable discrimination method to that of existing factor-based multivariate methods.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

Naphthalene and benzene levels in microenvironments associated with potential exposure: new and old apartments with moth repellents,and cabins of passenger cars

A lesser degree of information is available with respect to microenvironments associated with potential exposure to naphthalene, in comparison with other volatile organic compounds. The current study investigated the levels of benzene as well as naphthalene, both in the indoor and outdoor air of apartments and in the cabins of passenger cars. Two groups of 20 apartment buildings (20 new and 20 old) were chosen on the basis of the selection criteria (apartment location and size). In addition, 10 actual commuters were recruited for this study. The equal number of drivers was recruited for the study for comparison of two types of fuels for vehicles (five drivers of gasoline-fuelled and five drivers of diesel-fuelled passenger cars). Indoor naphthalene concentrations were similar between old and new apartments, while the benzene concentrations in new apartments were significantly higher than those of old apartments. The naphthalene concentrations in bedrooms, where wardrobes with moth repellent (MRs) were placed, were significantly higher than those for living rooms where no MRs were present. In turn, these indoor concentrations were significantly higher than outdoor levels. It is noteworthy that the mean and median values of naphthalene measured in the bedrooms exceeded the USEPA RfC (inhalation reference concentration) of 3?µg?m^?3, and the living room values were close to the RfC, while the residential benzene levels exceeded the European benzene limit of 5?µg?m^?3. In contrast, the maximum outdoor levels were well below that of the RfC. The use of passenger cars appeared to be a significant daily activity for both naphthalene and benzene exposure. The naphthalene-to-benzene ratios varied with the type of microenvironments. Both the indoor naphthalene and benzene concentrations in the present study were much higher than those of other studies.