Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

Very high coercivities of top-layer diffusion Au/FePt thin films

The Au/FePt samples were prepared by depositing a gold cap layer at room temperature onto a fully ordered FePt layer, followed by an annealing at 800 °C for the purpose of interlayer diffusion. After the deposition of the gold layer and the high-temperature annealing, the gold atoms do not dissolve into the FePt Ll₀ lattice. Compared with the continuous FePt film, the TEM photos of the bilayer Au(60 nm)/FePt(60 nm) show a granular structure with FePt particles embedded in Au matrix. The coercivity of Au(60 nm)/FePt(60 nm) sample is 23.5 kOe, which is 85% larger than that of the FePt film without Au top layer. The enhancement in coercivity can be attributed to the formation of isolated structure of FePt ordered phase.     

PIXE analysis of the Mn-doped content in Ga1-xMnxN film grown by LP-MOVPE

Summary Department of Technical Physics, School of Physics, Peking Unive     

Hadron production near threshold

Final state interaction effects inpp→ pΛK ⁺ andpd →³Heη reactions are explored near threshold to study the sensitivity of the cross-sections to thepΛ potential and theηN scattering matrix. The final state scattering wave functions between Λ andp andη and³He are described rigorously. The Λ production is described by the exchange of one pion and aK-meson between two protons in the incident channel. Theη production is described by a two-step model, where in the first step a pion is produced. This pion then produces anη by interacting with another nucleon     

Formation of Fe i –B pairs in silicon at high temperatures

We report on the detection of Fe _i –B pairs in heavily B doped silicon using ⁵⁷Fe emission Mössbauer spectroscopy following implantation of radioactive ⁵⁷Mn⁺ parent ions (T _1/2?=?1.5 min) at elevated temperatures >?850 K. The Fe _i –B pairs are formed upon the dissociation of Fe _i –V pairs during the lifetime of the Mössbauer state (T _1/2?=?100 ns). The resulting free interstitial Fe_i diffuses over sufficiently large distances during the lifetime of the Mössbauer state to encounter a substitutional B impurity atom, forming Fe _i –B pairs, which are stable up to ～1,050 K on that time scale.     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

Electrophoretic study of the effect of ultradisperse iron powder on cotton seed proteins

The protein composition of seeds treated with a suspension of ultradisperse iron was studied using electrophoresis on PAAG. Changes were noted in the fractions with relative electrophoretic mobility (REM) 0.11 of water-soluble and REM 0.37 of buffer-soluble An-9 cotton seed proteins. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 384–385, July–August, 2006.     

Effects of ground-state correlations on 2νββ decay rates and limitations of the QRPA approach

Half-lives of the 2νββ decay are calculated in the proton-neutron QRPA for⁷⁶Ge,⁸²Se,¹⁰⁰Mo,^128,130Te,¹³⁶Xe and¹⁵⁰Nd. The strength of the particle-particle interaction, which plays a decisive role for a reliable evaluation of the half-lives, is determined from a QRPA calculation of singleβ ⁺ decays. The 2ν decay rates calculated with the interaction strength fitted in this way are strongly suppressed and found to be consistent with the existing experimental data. Effects of the ground-state correlations on the suppression are investigated. On the other hand, the present calculation indicates limitations of the QRPA approach.     

Oil Migration in Chocolate

Oil migration in filled chocolates limits shelf life due to texture changes and loss of visual appeal. Spatial and temporal oil concentration changes of a two-layer chocolate and peanut butter filling system, which models a filled chocolate, were monitored by magnetic resonance imaging. Formulations of chocolate varied with respect to particle size, milk fat content and emulsifier level. Sorption-time experimental data was used to establish the best fit diffusion coefficient for a Fickian diffusion model. On the basis of the comparison of spatial experimental data to the model, Fickian diffusion alone does not account for oil migration. Authors' address: Michael J. McCarthy, Department of Food Science and Technology, University of California, One Shields Avenue, Davis, CA 95616, USA     

Y2Rh3Ge, a rhombohedral substitution variant of the MgCu2 type

The structure of Y₂Rh₃Ge has been determined and refined from single-crystal X-ray diffraction data (R = 0.042). It is a rhombohedral, ternary, ordered variant of the cubic Laves structure type MgCu₂, with space group and c = 11.82(1)Å for the triple hexagonal cell. The c/a ratio (2.13) is significantly lower than the value for the triple hexagonal cell of the cubic lattice of the parent structure type (2.45), resulting in shorter distances between Rh and Ge atoms than between Rh atoms. The isotypy of Pr₂Rh₃Si, Er₂Rh₃Si, Pr₂Rh₃Ge, and Er₂Rh₃Ge has been established from Guinier films. The Y₂Rh₃Ge structure is compared with the binary compound YRh₂, crystallizing with the MgCu₂ structure, and with three other simple, ternary, ordered substitution derivatives of the Laves phase types MgZn₂ and MgCu₂.