Atropisomerism of phosphorus-containing N-aryl carbamates. Experimental and computational data

Studies by ¹H NMR spectroscopy and X-ray diffraction analysis revealed hindered rotation of the aromatic substituent about the C_Ar—N bond in ortho-substituted (except for o-fluorine-substituted) phosphorus-containing carbamates. The energy barriers to rotation (G _c ) and coalescence temperatures (T _c) determined by the coalescence method increase with increasing volume of the ortho substituent. Conformations resulting from rotation of the ortho-substituted aryl group about the C_Ar—N bond were analyzed by quantum-chemical methods, potential curves were constructed, and differences between the conformational energies and the heights of rotation barriers were estimated. The theoretical rotation barriers change in parallel with the experimental values of G _c ; however, the theoretical values are much smaller in magnitude.     

Reduction of the pertechnetate anion with bidentate phosphine ligands

The reduction of ammonium pertechnetate with bis(diphenylphosphino)methane (dppm), and with diphenyl-2-pyridyl phosphine (Ph(2)Ppy), has been investigated. The neutral Tc(II) complex, trans-TcCl(2)(dppm)(2) (1), has been isolated from the reaction of (NH(4))[TcO(4)] with excess dppm in refluxing EtOH/HCl. Chemical oxidation with ferricinium hexafluorophosphate results in formation of the cationic Tc(III) analogue, trans-[TcCl(2)(dppm)(2)](PF(6)) (2). The dppm ligands adopt the chelating bonding mode in both complexes, resulting in strained four member metallocycles. With excess PhPpy, the reduction of (NH(4))[TcO(4)] in refluxing EtOH/HCl yields a complex with one chelating Ph(2)Ppy ligand and one unidentate Ph(2)Ppy ligand, mer-TcCl(3)(Ph(2)Ppy-P,N)(Ph(2)Ppy-P) (3). The cationic Tc(III) complexes, trans-[TcCl(2)(Ph(2)P(O)py-N,O)(2)](PF(6)) (4) and trans-[TcCl(2)(dppmO-P,O)(2)](PF(6)) (5) (Ph(2)P(O)py = diphenyl-2-pyridyl phosphine monoxide and dppmO = bis(diphenylphosphino)methane monoxide), have been isolated as byproducts from the reactions of (NH(4))[TcO(4)] with the corresponding phosphine. The products have been characterized in the solid state and in solution via a combination of single-crystal X-ray crystallography and spectroscopic techniques. The solution state spectroscopic results are consistent with the retention of the bonding modes revealed in the crystal structures.     

The `cyclophene' [2.2.2](1,2,4)cyclophan‐9‐ene

In the title compound, C₁₈H₁₆, the [2.2]paracyclophane geometry is restrained to a considerable extent despite the introduction of the extra C=C bridge; typical paracyclophane features, such as the elongated C—C bridges, are still observed. However, the bridgehead atoms of the C=C bridge are forced into unusually close proximity [2.657 (3) Å], which in turn causes the rings to be rotated to an interplanar angle of 13.7 (2)°. The packing involves hexagonally close‐packed layers of molecules parallel to the xy plane, corresponding to the known `7,11' pattern of paracyclophanes, but without significant short intermolecular contacts.     

Liquid chromatography/electrospray ionisation mass spectrometric investigations of imidazoline corrosion inhibitors in crude oils

The so-called imidazolines (2-alkyl-1-[ethylalkylamide]-2-imidazolines and 2-alkyl-1-ethylamine-2-imidazolines) are a group of surface-active compounds, complex mixtures of which are used by various industries as surfactants and corrosion inhibitors. Although their industrial synthesis was reported over 100 years ago, few methods for the determination of individual imidazolines in mixtures, including industrial matrices such as crude oils, have been reported. Here we demonstrate that spiking of crude oils with synthetic imidazolines followed by solid-phase extraction and liquid chromatography/electrospray ionisation multistage mass spectrometry (LC/ESI - MS(n)) allows an estimation of low (<10) parts per million concentrations of individual imidazolines in crude oils. Whilst non-optimised at present, the method is a significant advance and may prove useful not only for improving an understanding of the mechanisms of industrial imidazoline synthesis and for monitoring downhole and topside oilfield operations, but also for the determination of the fate of imidazoline-based oilfield corrosion inhibitors and surfactants in the environment.     

C—H...π interactions in five ethynyl‐substituted [2.2]paracyclophanes: further examples of the `7,11' packing pattern

The monosubstituted derivative 4‐ethynyl[2.2]paracyclophane, C₁₈H₁₆, (I), and the four disubstituted isomers, 4,12‐, (II), 4,13‐, (III), 4,15‐, (IV), and 4,16‐diethynyl[2.2]paracyclophane, (V), all C₂₀H₁₆, show the usual distortions of the [2.2]paracyclophane framework. The crystal packing is analyzed in terms of C—H...π interactions, some with H...π as short as 2.47 Å, in which the cyclophane rings and/or the triple‐bond systems may act as acceptors. For compounds (I) and (IV), the known `7,11'‐type cyclophane packing is observed, with a herring‐bone pattern of molecules in a layer structure.     

Practical and theoretical considerations in the gas chromatography/combustion/isotope ratio mass spectrometry delta(13)C analysis of small polyfunctional compounds

Carbohydrates and proteins are among the most abundant naturally occurring biomolecules and so suitable methods for their reliable stable isotope analysis by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) are required. Due to the non-volatile nature of these compounds they require hydrolytic cleavage to their lower molecular weight subunits and derivatisation prior to GC/C/IRMS analysis. The addition of carbon to the molecules and any kinetic isotopic fractionation associated with derivatisation must be accounted for in order to provide meaningful stable isotope values and estimates of propagated errors. To illustrate these points amino acid trifluoroacetate/isopropyl esters and alditol acetates were prepared from authentic amino acids and monosaccharides, respectively. As predicted from the derivatisation reaction mechanisms, a kinetic isotope effect was observed which precludes direct calculation of delta(13)C values of the amino acids and monosaccharides by simple mass balance equations. This study shows that the kinetic isotope effect associated with derivatisation is both reproducible and robust, thereby allowing the use of correction factors. We show how correction factors can be determined and accurately account for the addition of derivative carbon. As a consequence of the addition of a molar excess of carbon and the existence of a kinetic isotope effect during derivatisation, errors associated with determined delta(13)C values must be assessed. We illustrate how such errors can be quantified (for monosaccharides +/-1.3 per thousand and for amino acids between +/-0.8 per thousand and +/-1.4 per thousand). With the magnitude of the errors for a given delta(13)C value of a monosaccharide or amino acid quantified, it is possible to make reliable interpretations of delta(13)C values, thereby validating the determination of delta(13)C values of amino acids as TFA/IP esters and monosaccharides as alditol acetates.     

Possible role of relativistic effects in the plasticity of the coordination geometry of cadmium(II). A voltammetric study of the stability of the complexes of cadmium(II) with 12-crown-4,15-crown-5 and 18-crown-6 in aqueous solution and the structures of [Cd(benzo-18-crown-6)(NCS)(2)] and [K(18-crown-6)][Cd(SCN)(3)

A differential pulse voltammetric study of complexes of Cd(II) and Pb(II) with crown ethers is reported. Measured log K(1) values for Cd(II) with 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane), 15-crown-5 (1,4,7,10,13-pentaoxacyclopentadecane), and 12-crown-4 (1,4,7,10-tetraoxacyclododecane) are respectively 2.53 (+/-0.06), 1.97 (+/-0.07), and 1.72 (+/-0.08) and for Pb(II) with 18-crown-6 is 4.17 (+/-0.03), all at 25 degrees C in 0.1 M LiNO(3). Cd(II) is smaller than is usually associated with strong bonding with crown ethers. The high log K(1) values for Cd(2+) with crown ethers found here are discussed in terms of distortion of Cd(II) by relativistic effects. The resulting plasticity of the coordination geometry of the Cd(II) ion allows it to meet the metal ion size requirements of all the crown ethers, allowing high log K(1) values to occur. Crystal structures for [Cd(bz-18-crown-6)(SCN)(2)] (1) (bz-18-crown-6 = benzo-1,4,7,10,13,16-hexaoxacyclooctadecane) and [K(18-crown-6)][Cd(SCN)(3)] (2) are reported. 1 was triclinic, space group P1, a = 8.5413(2), b = 10.0389(2), and c = 13.4644(2) A, alpha = 94.424(1), beta = 102.286(1), and gamma = 93.236(1) degrees, Z = 2, and final R = 0.023. 2 was orthorhombic, space group Cmc2(1), a = 14.7309(3), b = 15.1647(3), and c = 10.6154(2) A, Z = 4, and final R = 0.020. In 1, the Cd occupies the cavity of the bz-18-crown-6 with long average Cd-O bond lengths of 2.65 A and is N-bonded to the thiocyanates with short average Cd-N bonds of 2.12 A. In [Cd(bz-18-crown-6)(SCN)(2)], the linear coordination involving the Cd and the two N-bonded thiocyanate groups in 1 is discussed in terms of the role of relativistic effects in the tendency to linear coordination geometry in group 12 metal ions. In 2 Cd forms a polymeric structure involving thiocyanate bridges between Cd atoms and K(+) occupies the cavity of the crown ether. 2 highlights the fact that cadmium is almost never S-bonded to thiocyanate except in bridging thiocyanates.     

High-Resolution continuum-source atomic absorption spectrometry in an inductively coupled plasma with photodiode array detection

Atomic absorption spectrometry (AAS) is a well established technique using flames and graphite furnaces. An inductively coupled plasma (ICP), however, is an attractive alternative atom/ion reservoir. A high-resolution continuum-source atomic absorption spectrometer with a photodiode array detector and an ICP as the atomization/ionization reservoir is described. Multi-wavelength capability permits the simultaneous determination of several elements by their atomic and/or ionic transitions. Each acquired spectrum is averaged for 10 s to improve the signal-to-noise ratios. Detection limits are calculated for 14 elements and compared with literature values.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

Synthesis of s-triazolocycloalkyl-, s-triazolobenzocycloalkyl-, and s-triazolocycloalkylhydrothiadiazines

The reaction of cyclic-α-haloketones with 5-subslituted-4-amino-4H-1,2,4-triazole-3-lhiols gave s-triãzolocycloalkylhydrothiadiazines and s-triazolobenzocycloalkylthiadiazines. Reduetion of the 5,5a-imine bond of the s-triazoloeycloalkylthiadiazines gave s-triazolocycloalkylhydrothia-diazines.