金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

Pogostone Enhances the Antibacterial Activity of Colistin against MCR-1-Positive Bacteria by Inhibiting the Biological Function of MCR-1

The emergence of the plasmid-mediated colistin resistance gene mcr-1 has resulted in the loss of available treatments for certain severe infections. Here we identified a potential inhibitor of MCR-1 for the treatment of infections caused by MCR-1-positive drug-resistant bacteria, especially MCR-1-positive carbapenem-resistant Enterobacteriaceae (CRE). A checkerboard minimum inhibitory concentration (MIC) test, a killing curve test, a growth curve test, bacterial live/dead assays, scanning electron microscope (SEM) analysis, cytotoxicity tests, molecular dynamics simulation analysis, and animal studies were used to confirm the in vivo/in vitro synergistic effects of pogostone and colistin. The results showed that pogostone could restore the bactericidal activity of colistin against all tested MCR-1-positive bacterial strains or MCR-1 mutant–positive bacterial strains (FIC < 0.5). Pogostone does not inhibit the expression of MCR-1. Rather, it inhibits the binding of MCR-1 to substrates by binding to amino acids in the active region of MCR-1, thus inhibiting the biological activity of MCR-1 and its mutants (such as MCR-3). An in vivo mouse systemic infection model, pogostone in combination with colistin resulted in 80.0% (the survival rates after monotherapy with colistin or pogostone alone were 33.3% and 40.0%) survival at 72 h after infection of MCR-1-positve Escherichia coli (E. coli) ZJ487 (blaNDM-1-carrying), and pogostone in combination with colistin led to one or more order of magnitude decreases in the bacterial burdens in the liver, spleen and kidney compared with pogostone or colistin alone. Our results confirm that pogostone is a potential inhibitor of MCR-1 for use in combination with polymyxin for the treatment of severe infections caused by MCR-1-positive Enterobacteriaceae.     

Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Klein–Nishina Effect and the Cosmic Ray Electron Spectrum

Radiative energy losses are very important in regulating the cosmic ray electron and/or positron(CRE) spectrum during their propagation in the Milky Way. Particularly, the Klein–Nishina(KN) effect of the inverse Compton scattering(ICS) results in less efficient energy losses of high-energy electrons, which is expected to leave imprints on the propagated electron spectrum. It has been proposed that the hardening of CRE spectra around 50 GeV observed by Fermi-LAT, AMS-02, and DAMPE could be due to the KN effect. We show in this work that the transition from the Thomson regime to the KN regime of the ICS is actually quite smooth compared with the approximate treatment adopted in some previous works. As a result, the observed spectral hardening of CREs cannot be explained by the KN effect. It means that an additional hardening of the primary electrons spectrum is needed. We also provide a parameterized form for the accurate calculation of the ICS energy-loss rate in a wide energy range.     

The behavior of technetium in technetium-scrubbing stage of PUREX process

Technetium decontamination factor as a function of the acidity, flow ratio, scrubbing stage number was investigated by counter-current cascade experiments or mixer-settler batch tests. Results showed that the acidity of the scrubbing acid has little influence on the decontamination factor of technetium when the acidity was kept in the range of 4.5–6 M. The most effective method to increase the decontamination factor is to lower the feed-to-acid flow ratio. Keeping other condition same the factor increased to 10.3 from 3.1 when feed-to-acid ratio changed to 4 from 5.6. The loss of uranium and plutonium can be recovered through a re-extraction technology.     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

Cross-flow heat transfer in fixed bed

Radial flow reactor operated at cross-flow heat transfer is focused for large scale methanol synthesis. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer were investigated and results show that the temperature profile of the area in front of the heating pipe is slightly affected by all the operating conditions. The main area whose temperature profile is influenced is located behind the heating pipe. The heat transfer direction is related to the direction of the flow. In order to obtain the basic parameters for radial flow reactor designing calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which were calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated values shows that the calculated values fit the experimental data satisfactorily and the formulas can be used for reactor designing calculation.     

Coupled intramolecular/heterointerfacial electron transfer in polyelectrolyte-shielded Iso-type black phosphorus hetero-structure boosts oxygen reduction kinetics

Searching new structured black phosphorus (BP) and exploring intriguing functions and applications have become a hot topic so far.Here,we introduce a novel Iso-...