Electrocatalytic Oxidation of 5‐(Hydroxymethyl)furfural Using High‐Surface‐Area Nickel Boride

The electrochemical oxidation of the biorefinery product 5‐(hydroxymethyl)furfural (HMF) to 2,5‐furandicarboxylic acid (FDCA), an important platform chemical for the polymer industry, is receiving increasing interest. FDCA‐based polymers such as polyethylene 2,5‐furandicarboxylate (PEF) are sustainable candidates for replacing polyethylene terephthalate (PET). Herein, we report the highly efficient electrocatalytic oxidation of HMF to FDCA, using Ni foam modified with high‐surface‐area nickel boride (Ni_xB) as the electrode. Constant potential electrolysis in combination with HPLC revealed a high faradaic efficiency of close to 100 % towards the production of FDCA with a yield of 98.5 %. Operando electrochemistry coupled to ATR‐IR spectroscopy indicated that HMF is oxidized preferentially via 5‐hydroxymethyl‐2‐furancarboxylic acid rather than via 2,5‐diformylfuran, which is in agreement with HPLC results. This study not only reports a low‐cost active electrocatalyst material for the electrochemical oxidation of HMF to FDCA, but additionally provides insight into the reaction pathway.     

Transition‐Metal π‐Ligation of a Tetrahalodiborane

The reaction of tetraiododiborane (B₂I₄) with trans‐[Pt(BI₂)I(PCy₃)₂] gives rise to the diplatinum(II) complex [{(Cy₃P)(I₂B)Pt}₂(μ₂:η³:η³‐B₂I₄)], which is supported by a bridging diboranyl dianion ligand [B₂I₄]^2?. This complex is the first transition‐metal complex of a diboranyl dianion, as well as the first example of intact coordination of a B₂X₄ (X=halide) unit of any type to a metal center.     

Molecular dynamics effects on luminescence properties of oligothiophene derivatives: a molecular mechanics-response theory study based on the CHARMM force field and density functional theory

CHARMM force field parameter values for a class of oligothiophene derivatives have been derived with reference to density functional theory/B3LYP potential energy surfaces. The force field parametrization of these luminescent conjugated polyelectrolytes includes the electronic ground state as well as the strongly light absorbing first excited state. In conjunction with quantum chemical response theory calculations of transition state properties, a molecular dynamical model of the Stokes shift is obtained. The theoretical model is benchmarked against experimental data recorded at room temperature which refer to sodium salts of p-HTAA and p-FTAA with distilled water as a solvent. For p-HTAA the theoretically predicted Stokes shift of 112 nm is in good agreement with the experimental result of 124 nm, given the approximations about exciton localization that were introduced to obtain a force field for the excited state.     

Micro- and nanostructures and their application in gas chromatography

This mini-review focuses on the latest developments in the field of micro- and nanostructures in gas chromatography (GC). Significant progress has been made in recent years in designing miniaturized structures, for example, structures based on cyclodextrins. These are now commercially available and thus not the topic of this short review. Rather, we concentrate here on on-going research activities on nanoparticles, micro-electromechanical systems (MEMS) and metal-organic framework (MOF) supports as well as state-of-the-art column geometries, with particular emphasis on lab-on-a-chip columns, which undoubtedly will find their way into regular GC developments in the future.     

Hyphenation of capillary high-performance liquid chromatography with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for nano-scale screening of single-bead combinatorial libraries

This paper focuses on the technical aspects of chemical screening from 384-well plate nano-scale single-bead combinatorial libraries. The analytical technique utilized is a combination of capillary liquid chromatography with ultraviolet detection and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The HPLC/MALDI-MS hyphenation is achieved by means of a micro-fraction collector with a peak detection system that automatically collects the peaks onto the MALDI targets for subsequent characterization. Several experimental parameters such as type of 384-well plate, well-plate sealing foils, and a column-switching procedure were investigated using a small test library of nine components. Additionally, the influence of different MALDI matrices, different MALDI targets and sample-spotting techniques on the MALDI detection sensitivity as well as the ruggedness and sample throughput capacity of this technique were studied. Optimum results for the analytes investigated were obtained with 2,5-dihydroxybenzoic acid using on-line mixing of HPLC effluent and matrix solution. To demonstrate the potential of this capillary HPLC/MALDI-TOFMS method, its application to several single-bead libraries was investigated. The instrumental method allowed for the rapid identification and purity assessment of combinatorial libraries with detection limits down to the higher femtomole level using both UV detection and MALDI mass spectrometry.     

Thermal evaluation of cashew nutshell liquid as new bioadditives for poly(methyl methacrylate)

In this study, the thermal-oxidative stability of poly(methyl methacrylate), PMMA, 1 % additivated with replenishable phenolic lipids is evaluated by thermogravimetric (TG/DTG) analyses and differential scanning calorimetry (DSC) analyses. Since technical cashew nutshell liquid (CNSL), a byproduct from the cashew industry, is composed basically of two phenolic lipids, cardanol and cardol, the utilization of this industrial waste and its main components as a new source of bioadditives for use as antioxidants is evaluated. The TG analyses revealed that addition of the phenolic constituent of CNSL increased the thermal stability of PMMA films considerably. The results obtained were also confirmed by DSC analyses.     

Influence of hydrolyzable metal ions on the interfacial chemistry, particle interactions, and dewatering behavior of kaolinite dispersions

The influence of hydrolyzable metal ions (Mn(II) and Ca(II)) adsorption on the surface chemistry, particle interactions, flocculation, and dewatering behavior of kaolinite dispersions has been investigated at pH 7.5 and 10.5. Metal ion adsorption was strongly cation type- and pH-dependent and significantly influenced the zeta potential, anionic polyacrylamide-acrylate flocculant (PAM) adsorption, shear yield stress, settling rate, and consolidation of kaolinite slurries. The presence of Mn(II) and Ca(II) ions alone led to a systematic reduction in zeta potential due to specific adsorption of positively charged metal ion-based hydrolysis products at the kaolinite-water interface. Metal ion-mediated zeta potential changes were reflected by lower dispersion shear yield stresses and improved clarification (higher settling rates) but had no detectable effect on dispersion consolidation. The adsorption of PAM was significantly improved by prior addition of the metal ions. In the presence of Mn(II) or Ca(II) ions, the flocculant adsorption density was enhanced at pH 7.5 for Mn(II) and pH 10.5 for Ca(II). Optimum flocculation conditions, involving partial rather than complete particle surface coverage by both metal ions and flocculant, were identified. As a consequence, the metal ions and flocculant acted synergistically to enhance dewatering, producing particle interactions that were more conducive to high settling rates and greater consolidation of kaolinite dispersions at pH 7.5 than 10.5.     

Basal Histamine H4 Receptor Activation: Agonist Mimicry by the Diphenylalanine Motif

Histamine H₄ receptor (H₄R) orthologues are G-protein-coupled receptors (GPCRs) that exhibit species-dependent basal activity. In contrast to the basally inactive mouse H₄R (mH₄R), human H₄R (hH₄R) shows a high degree of basal activity. We have performed long-timescale molecular dynamics simulations and rigidity analyses on wild-type hH₄R, the experimentally characterized hH₄R variants S179M, F169V, F169V+S179M, F168A, and on mH₄R to investigate the molecular nature of the differential basal activity. H₄R variant-dependent differences between essential motifs of GPCR activation and structural stabilities correlate with experimentally determined basal activities and provide a molecular explanation for the differences in basal activation. Strikingly, during the MD simulations, F169^45.55 dips into the orthosteric binding pocket only in the case of hH₄R, thus adopting the role of an agonist and contributing to the stabilization of the active state. The results shed new light on the molecular mechanism of basal H₄R activation that are of importance for other GPCRs.