An unprecedented tetranuclear niobium aqua ion with a capping mu4-sulfido ligand

The aqueous solution chemistry of niobium is rather unexplored, and well characterized aqua complexes are scarce. In this work, a new niobium aqua ion is obtained upon treatment of Zn-reduced ethanolic solutions of NbCl5 with HCl in the presence of a sulfide source. The red aqua ion, obtained upon cation-exchange chromatography, forms readily the thiocyanate complex which has been crystallized as Cs(4.26)Na(1.74)[Nb4SO5(NCS)10] . 0.33H2O. X-ray crystallography revealed an unprecedented metal-metal bonded tetranuclear Nb4(mu4-S)(mu2-O)5(4+) core with a capping mu4-S ligand.     

Some fundamental and technical aspects of the quantitative analysis of pharmaceutical drugs by matrix-assisted laser desorption/ionization mass spectrometry

The purpose of the present paper was to study some of the underlying physical and technical aspects of high-throughput quantitative matrix-assisted laser desorption/ionization (MALDI) of small drug molecules. A prototype MALDI-triple quadrupole instrument equipped with a high repetition rate laser was employed. Initially, the detection limits and dynamic ranges for the quantitation of four drugs (quinidine, danofloxacin, ramipril and nadolol) were determined. Internal standards were carefully chosen for each of these analytes in terms of structure similarity and fragmentation pathways. Three organic matrices were tested for these assays, resulting in different crystallization behaviors and measurement reproducibilities. alpha-Cyano-4-hydroxycinnamic acid yielded the best results and was subsequently employed for the quantitative determination of all four analytes. Further experiments considered the role of laser energy and pulse rate on the ablated areas as well as ion signals. Light microscope and scanning electron microscope images allowed the examination of the ablated area of the MALDI spots. The images showed convincing evidence that the ablated area was virtually void of crystals after analysis, with no preferential removal of material in the center of the laser's path. Average values for the amount of material ablated were determined to be 3.9+/-0.5% of the total spot size, and as low as 19.5 attomoles of analyte were detectable for our most sensitive analyte, ramipril. It was calculated that, under these assay conditions, it was possible to accurately quantify less than 1 femtomole of all analytes with the use of appropriately pure internal standards. These studies showed very promising results for the quantitative nature of MALDI for small molecules with molecular weights less than 500 Da.     

Structural snapshots of a flexible Cu2P2 core that accommodates the oxidation states Cu(I)Cu(I), Cu1.5Cu1.5, and Cu(II)Cu(II)

The phosphido-bridged dicopper(I) complex {(PPP)Cu}2 has been synthesized and structurally characterized ([PPP]- = bis(2-di-iso-propylphosphinophenyl)phosphide). Cyclic voltammetry of {(PPP)Cu}2 in THF shows fully reversible oxidations at -1.02 V (Cu1.5Cu1.5/CuICuI) and -0.423 V (CuIICuII/Cu1.5Cu1.5). Chemical oxidation of {(PPP)Cu}2 by one electron yields the class III mixed-valence species [{(PPP)Cu}2]+ (EPR, UV-vis). Structural data establish an unexpectedly large change (0.538 A) in the Cu...Cu distance upon oxidation state. Oxidation of {(PPP)Cu}2 by two electrons yields the dication [{(PPP)Cu}2]2+, an antiferromagnetically coupled dicopper(II) complex. Maintenance of a pseudotetrahedral geometry that is midway between a square plane and an ideal tetrahedron at the copper centers, along with a high degree of flexibility at the phosphide hinges, allows for efficient access to CuICuI, Cu1.5Cu1.5, and CuIICuII redox states without the need for ligand exchange, substitution, or redistribution processes.     

The influence of Al(III) supersaturation and NaOH concentration on the rate of crystallization of Al(OH)3 precursor particles from sodium aluminate solutions

The growth kinetics of colloidal Al(III)-containing particles (diameter<1000 nm), nucleated in optically clear, supersaturated sodium aluminate solutions as a precursor to Al(OH)(3) crystals, has been studied using dynamic light scattering. Two series of solutions were examined at 22 degrees C to determine the influence of Al(III) supersaturation and NaOH concentration on the initial particle growth behavior. One solution series consisted of solutions with constant Al(III) absolute supersaturation (DeltaC) of 1.48 M and [NaOH] range 1.83-4.00 M ([NaOH]/[Al(III)]=1.13-2.15) and Al(III) relative supersaturation (sigma)=3.86-10.36. The other solution series had a constant sigma of 7.55 and [NaOH] range of 1.50-4.27 M ([NaOH]/[Al(III)]=1.18-1.54) and DeltaC=0.86-3.19. The correlation between the initial particle growth rates and supersaturation (DeltaC or sigma) revealed marked anomalies over the entire supersaturation range studied. The growth rate remained substantially constant in the DeltaC range 0.86-2.55 M (for the constant sigma solution series), before increasing sharply upon a further increase of DeltaC beyond 2.55 M. The variation of the growth rate with sigma in the range 3.86-9.00 (for the constant DeltaC solution series) was remarkably weak, contrary to expectation. At higher sigma (>9.00), however, a marked increase in growth rate with increasing sigma was displayed. At constant DeltaC or sigma, the growth rate showed a strong variation with NaOH concentration, indicating that Na(+) and OH(-) species play a pivotal role in the Al(OH) precursor particles (nuclei) growth process. Furthermore, the kinetics of growth displayed by these nanosized particles are an order of magnitude slower than those observed for macroscopic gibbsite (gamma-Al(OH)(3)) crystals at similar supersaturations and temperature. The difference may be rationalized in terms of particle size and Al(OH)(3) dimorphic phase dependent solubility effects. An empirically adequate growth kinetics modeling was achieved when the growth rates were correlated with the Al(III) supersaturation (DeltaC or sigma) and the excess (free) NaOH concentration, rather than the former alone, as is commonly the case. A critical [NaOH]/[Al(III)] molar ratio of 1.27-1.35, below which the particle growth rate increased markedly and above which the rate was significantly reduced, was observed. This behavior is believed to be linked to solution speciation change that occurs at certain Al(III) and NaOH compositions.     

A comparison of data analysis methods for determining gas phase stabilities by cid: Alkali metal complexes of polyether ionophore antibiotics

The gas phase stabilities of Group I metal complexes of the polyether ionophore antibiotics lasalocid and monensin were investigated by collision induced dissociation mass spectrometry. Electrospray ionization was used with a triple quadrupole mass spectrometer for the determination of threshold dissociation energies upon application of increasing collision energies. Various data analysis techniques for the determination of dissociation energies are discussed to assess the most suitable method for determining the stabilities of the ionophore-metal complexes studied here. In all cases only the relative stabilities of different complexes may be obtained by the method presented in this study, which does not assess absolute gas phase dissociation energies. Correction factors have been applied, however, to account for the energy conversion during collisions of different metal complexes and the varying degrees of freedom of different sized ligands, allowing for the comparison of the stabilities of different ionophores with like-metals. The measured threshold dissociation energies were compared with respect to the ionic radius of the metal cation, revealing a maximum stability for the K+ complexes of both lasalocid and monensin. A striking decrease in the stabilities of the Rb+ and Cs+ complexes was observed and is believed to be related to a decreasing degree of coordination that the ionophores can accomplish with the larger metals.     

Thermospray liquid chromatographic—mass spectrometric multi-residue determination of 128 polar pesticides in aqueous environmental samples

Thermospray (TSP) ionization was evaluated with respect to its suitability in the LC-MS determination of a broad range of pesticides. The sensitivity and the selectivity of this method for the determination of 128 pesticides having a wide range of structures and polarities were investigated. An LC separation in combination with postcolumn addition of a volatile salt solution was developed, which permits the analysis of 95 pesticides with a single LC-MS method using reversed-phase gradient caution. The retention data and TSP mass spectra of these compounds are presented. The advantages of TSP postcolumn techniques in comparison with conventional systems are discussed. The application of this method to the analysis of an environmental sample (river water) spiked with eight phenylureas is demonstrated. lie method was evaluated with respect to detection limit, linearity and reproducibility. In addition, a simple method for enhancing the structural information from TSP spectra is reported, which makes use of specific instabilities found with many pesticides. As an example, possibilities for the confirmatory analysis of carbamates are described.