Zwitterionic and cationic bis(phosphine) platinum(II) complexes: structural,electronic, and mechanistic comparisons relevant to ligand exchange and benzene C-H activation processes

Structurally similar but charge-differentiated platinum complexes have been prepared using the bidentate phosphine ligands [Ph(2)B(CH(2)PPh(2))(2)], ([Ph(2)BP(2)], [1]), Ph(2)Si(CH(2)PPh(2))(2), (Ph(2)SiP(2), 2), and H(2)C(CH(2)PPh(2))(2), (dppp, 3). The relative electronic impact of each ligand with respect to a coordinated metal center's electron-richness has been examined using comparative molybdenum and platinum model carbonyl and alkyl complexes. Complexes supported by anionic [1] are shown to be more electron-rich than those supported by 2 and 3. A study of the temperature and THF dependence of the rate of THF self-exchange between neutral, formally zwitterionic [Ph(2)BP(2)]Pt(Me)(THF) (13) and its cationic relative [(Ph(2)SiP(2))Pt(Me)(THF)][B(C(6)F(5))(4)] (14) demonstrates that different exchange mechanisms are operative for the two systems. Whereas cationic 14 displays THF-dependent, associative THF exchange in benzene, the mechanism of THF exchange for neutral 13 appears to be a THF independent, ligand-assisted process involving an anchimeric, eta(3)-binding mode of the [Ph(2)BP(2)] ligand. The methyl solvento species 13, 14, and [(dppp)Pt(Me)(THF)][B(C(6)F(5))(4)] (15), each undergo a C-H bond activation reaction with benzene that generates their corresponding phenyl solvento complexes [Ph(2)BP(2)]Pt(Ph)(THF) (16), [(Ph(2)SiP(2))Pt(Ph)(THF)][B(C(6)F(5))(4)] (17), and [(dppp)Pt(Ph)(THF)][B(C(6)F(5))(4)] (18). Examination of the kinetics of each C-H bond activation process shows that neutral 13 reacts faster than both of the cations 14 and 15. The magnitude of the primary kinetic isotope effect measured for the neutral versus the cationic systems also differs markedly (k(C(6)H(6))/k(C(6)D(6)): 13 = 1.26; 14 = 6.52; 15 approximately 6). THF inhibits the rate of the thermolysis reaction in all three cases. Extended thermolysis of 17 and 18 results in an aryl coupling process that produces the dicationic, biphenyl-bridged platinum dimers [[(Ph(2)SiP(2))Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (19) and [[(dppp)Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (20). Extended thermolysis of neutral [Ph(2)BP(2)]Pt(Ph)(THF) (16) results primarily in a disproportionation into the complex molecular salt [[Ph(2)BP(2)]PtPh(2)](-)[[Ph(2)BP(2)]Pt(THF)(2)](+). The bulky phosphine adducts [Ph(2)BP(2)]Pt(Me)[P(C(6)F(5))(3)] (25) and [(Ph(2)SiP(2))Pt(Me)[P(C(6)F(5))(3)]][B(C(6)F(5))(4)] (29) also undergo thermolysis in benzene to produce their respective phenyl complexes, but at a much slower rate than for 13-15. Inspection of the methane byproducts from thermolysis of 13, 14, 15, 25, and 29 in benzene-d(6) shows only CH(4) and CH(3)D. Whereas CH(3)D is the dominant byproduct for 14, 15, 25, and 29, CH(4) is the dominant byproduct for 13. Solution NMR data obtained for 13, its (13)C-labeled derivative [Ph(2)BP(2)]Pt((13)CH(3))(THF) (13-(13)()CH(3)()), and its deuterium-labeled derivative [Ph(2)B(CH(2)P(C(6)D(5))(2))(2)]Pt(Me)(THF) (13-d(20)()), establish that reversible [Ph(2)BP(2)]-metalation processes are operative in benzene solution. Comparison of the rate of first-order decay of 13 versus the decay of d(20)-labeled 13-d(20)() in benzene-d(6) affords k(13)()/k(13-d20)() approximately 3. The NMR data obtained for 13, 13-(13)()CH(3)(), and 13-d(20)() suggest that ligand metalation processes involve both the diphenylborate and the arylphosphine positions of the [Ph(2)BP(2)] auxiliary. The former type leads to a moderately stable and spectroscopically detectable platinum(IV) intermediate. All of these data provide a mechanistic outline of the benzene solution chemistries for the zwitterionic and the cationic systems that highlights their key similarities and differences.     

A 3D QSAR study on a set of dopamine D4 receptor antagonists

The molecular alignments obtained from a previously reported pharmacophore model have been employed in a three-dimensional quantitative structure-activity relationship (3D QSAR) study, to obtain a more detailed insight into the structure-activity relationships for D(2) and D(4) receptor antagonists. The frequently applied CoMFA method and the related CoMSIA method were used. Statistically significant models have been derived with these two methods, based on a set of 32 structurally diverse D(2) and D(4) receptor antagonists. The CoMSIA and the CoMFA methods produced equally good models expressed in terms of q(2) values. The predictive power of the derived models were demonstrated to be high. Graphical interpretation of the results, provided by the CoMSIA method, brings to light important structural features of the compounds related to either low- or high-affinity D(2) or D(4) antagonism. The results of the 3D QSAR studies indicate that bulky N-substituents decrease D(2) binding, whereas D(4) binding is enhanced. Electrostatically favorable and unfavorable regions exclusive to D(2) receptor binding were identified. Likewise, certain hydrogen-bond acceptors can be used to lower D(2) affinity. These observations may be exploited for the design of novel dopamine D(4) selective antagonists.     

Selective determination of organophosphate flame retardants and plasticizers in indoor air by gas chromatography, positive-ion chemical ionization and collision-induced dissociation mass spectrometry

Gas chromatography/ion trap mass spectrometry with in-source ionization and dissociation was used in positive-ion chemical ionization (PICI) mode for the determination of organophosphate triesters in indoor air. These compounds are widely used as additive flame retardants and plasticizers in different types of materials and have become ubiquitous pollutants in indoor environments. When using collision-induced dissociation in PICI mode the fragmentation of the organophosphate triesters can be performed in a more controllable way than in electron ionization (EI) mode. The developed selected-reaction monitoring method provided high selectivity for the investigated compounds. For 8-h air measurements (corresponding to 1.5 m3 of sampled air) the limit of detection of the method was determined to be in the range 0.1-1.4 ng m(-3), which is comparable with nitrogen-phosphorus detection and about 50-fold lower than when using EI in selected-ion monitoring mode. The presented method was applied to samples from three common indoor environments, in which a number of organophosphate triesters were identified and quantified. The dominating compound was found to be tris(2-chloropropyl) phosphate, which occurred at levels up to 0.8 microg m(-3).     

Polymer-assisted laser desorption/ionization analysis of small molecular weight compounds

The use of non-polar, small polymers as matrices for the analysis of low molecular weight compounds in polymer-assisted laser desorption/ionization mass spectrometry (PALDI-MS) is demonstrated. The matrices evaluated were either based on an oligothiophene or a benzodioxin backbone. Metallocenes, polycyclic hydrocarbons, a fluorosurfactant, and a subset of small organic compounds with various functionalities, served as model analytes. The mechanism of ionization charge transfer is discussed and ionization potentials for the matrices in the study have been estimated using density functional theory (DFT) calculations. Some of the results are possibly contradictory to the generally accepted limiting conditions for gas-phase charge-transfer reactions. These results are interpreted in the light of energy pooling. Also a new mass calibration procedure for the low-mass region in positive ion mode is presented, and some aspects of the ionization/desorption process leading to radical cations are studied.     

Pseudooctahedral complexes of vanadium(III): electronic structure investigation by magnetic and electronic spectroscopy

A variety of physical methods has been used to probe the non-Kramers, S = 1, V(III) ion in two types of pseudooctahedral complexes: V(acac)(3), where acac = anion of 2,4-pentanedione, and VX(3)(thf)(3), where thf = tetrahydrofuran and X = Cl and Br. These methods include tunable frequency and high-field electron paramagnetic resonance (HFEPR) spectroscopy (using frequencies of approximately 95-700 GHz and fields up to 25 T) in conjunction with electronic absorption, magnetic circular dichroism (MCD), and variable-temperature variable-field MCD (VTVH-MCD) spectroscopies. Variable-temperature magnetic susceptibility and field-dependent magnetization measurements were also performed. All measurements were conducted on complexes in the solid state (powder or mull samples). The field versus sub-THz wave quantum energy dependence of observed HFEPR resonances yielded the following spin Hamiltonian parameters for V(acac)(3): D = +7.470(1) cm(-1); E = +1.916(1) cm(-1); g(x) = 1.833(4); g(y) = 1.72(2); g(z) = 2.03(2). For VCl(3)(thf)(3), HFEPR detected a single zero-field transition at 15.8 cm(-1) (474 GHz), which was insufficient to determine the complete set of spin Hamiltonian parameters. For VBr(3)(thf)(3), however, a particularly rich data set was obtained using tunable-frequency HFEPR, and analysis of this data set gave the folowing: D = -16.162(6) cm(-1); E = -3.694(4) cm(-1); g(x) = 1.86(1); g(y) = 1.90(1); g(z) = 1.710(4). Analysis of the VTVH-MCD data gave spin Hamiltonian parameters in good agreement with those determined by HFEPR for both V(acac)(3) and VBr(3)(thf)(3) and in rough agreement with the estimate for VCl(3)(thf)(3) (D approximately 10 cm(-1), |E/D| approximately 0.18), together with the finding that the value of D is negative for both thf complexes. The electronic structures of these V(III) complexes are discussed in terms of their molecular structures and the electronic transitions observed by electronic absorption and MCD spectroscopies.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

Cd(II) determination in the presence of aqueous micellar solutions

The equilibrium constants and molar absorptivities for the fast formation of a 1:3 complex between cadmium(II) (Cd(II)) and dithizonate anion, in the presence of cationic and non-ionic surfactants, allowed a simple and fast spectrophotometric determination of total cadmium. Indeed, the molar absorptivities of the Cd(II)-dithizone (Dz) complex formed in the presence of the neutral Triton X-100 and cationic cetyltrimethylammonium bromide (CTAB) surfactants are almost twice the value observed in the standard method and the maxima of absorption are shifted by about 40 nm when compared with the standard method. Clearly, the use of neutral and cationic surfactants promotes a higher value of the molar absorptivities of the complex, resulting in an increase in the sensitivity of the method. Application of the method to the desorption of Cd(II) ions from clays is illustrated.     

Raman spectroscopy in liquids at high pressure

The pressure dependence of the reorientational correlation function for chloroform has been measured by analysis of the Raman 3019 cm^{? 1} A₁ CH stretching lineshape at 1, 1000, and 2000 bar and 23°C. These reorientational correlation functions were obtained using the method of spectral Fourier deconvolution introduced by Bratos. The results are compared to the correlation times obtained from the NMR deuteron T₁ relaxation times for CDCl₃ and those calculated from high pressure viscosity measurements.     

A highly emissive Cu2N2 diamond core complex supported by a [PNP]- ligand

A Cu2N2 diamond core structure, {(PNP)CuI}2 (2), supported by a [PNP]- ligand (1) ([PNP]- = bis(2-(diisobutylphosphino)phenyl)amide) has been prepared. 2 is highly emissive at ambient temperature in both the solid and solution states and is characterized by a relatively long-lived excited state (tau > 10 mus) and an unusually high quantum yield (phi > 0.65). These observations are consistent with a low degree of structural reorganization between the ground state of 2 and its excited state *2, and also with a high degree of steric protection of the two copper centers of 2 afforded by the bulky [PNP]- ligand. An estimate for the excited-state reduction potential of *2 (ca. -3.2 V vs Fc+/Fc), and the availability of two well-separated and reversible ground-state redox processes, suggests that bimetallic copper systems of these types may be interesting candidates to consider for photochemically driving multielectron redox transformations.