Long-Term Impact of Wind Erosion on the Particle Size Distribution of Soils in the Eastern Part of the European Union

Wind erosion is the leading cause of soil degradation and air pollution in many regions of the world. As wind erosion is controlled by climatic factors, research on this phenomenon is urgently needed in soil and land management in order to better adapt to climate change. In this paper, the impact of wind erosion on the soil surface in relation to particle size distribution was investigated. Changes in percentage of sand, silt and clay fractions based on historical KPP data (1961–1970), LUCAS data base (2009), and field measurements (2016) were analysed in five cadastral areas impacted by wind erosion (Záhorie Lowlands, Slovakia). With the use of GIS tools, models of spatial distribution of sand, silt, clay and erodible fraction (EF) content were developed based on those measurements. Our findings proved that soil texture change driven by wind erosion could happen relatively quickly, and a significant proportion of soil fine particles may be carried away within a few years. The results indicate that the soil surface became much rougher over the period of more than 50 years, but also that the accumulation of fraction of the silt particles occurred in most of the areas affected by the erosive effect.     

Microwave‐Assisted Solvent‐Free Synthesis of Ipsapirone

The currently applied synthetic methods of serotonin receptor ligands belonging to the group of long‐chain arylpiperazines, including ipsapirone, require the use of toxic solvents and comprise numerous synthetic steps. Moreover, the reaction yield does not exceed 60% in the majority of cases. These factors lead to an increased energy consumption and negatively impact the environment. This paper describes a more environmentally friendly method of ipsapirone synthesis that we decided to use. Ipsapirone was obtained in two different methods. The first method involved N‐alkylation of bromobutyl saccharin with 1‐(2‐pyrimidyl)piperazine dihydrochloride, while the second was a one‐pot method. Neither of these requires the use of toxic and expensive solvents. A shortened synthesis time, not exceeding 10 min due to the use of microwave radiation, is also another advantage of these methods. The yield of the final product, ipsapirone, was 85% and 67% in the first and the second method, respectively. We also attempted to obtain ipsapirone using saccharin and arylpiperazine salt (method III) as starting materials, but to no avail in the tested conditions. As described herein, the green chemistry method for ipsapirone synthesis is rapid, cost‐effective, and environment friendly.     

Surface properties of ionomers based on styrene-b-acrylic acid copolymers obtained by copolymerization in emulsion

Surface properties of styrene-b-acrylic acid copolymers obtained in emulsion and suitable ionomers before and after UV-irradiation were studied by measurements of contact angles and FTIR-ATR spectroscopy.The research focused on the influence of different content of carboxylic acid groups in copolymers, of various types and contents of alkali metal salts in ionomers and of cesium acrylate or methacrylate in ionomers on hydrophilicity of the surfaces of these samples and the course of photodegradation in them.Hydrophilicity of initial copolymer surfaces was higher than this of polystyrene as a result of presence of carboxylic acid groups, which also made the surfaces of these copolymers more sensitive to UV-irradiation.Hydrophilicity of the surfaces of ionomers containing cesium acrylates depended on the content of cesium salt in the samples. The course of ionomer photooxidation was also dependent on the content of this salt.The surface of ionomer containing cesium methacrylate was more polar than this of ionomer containing cesium acrylate.Styrene-based ionomers containing 3.7 mol% of various alkali metal acrylates had less polar surfaces than initial copolymer and they were also more resistant to UV-irradiation in comparison to the initial copolymer.Copolymers obtained in emulsion and suitable ionomers had more polar surfaces and they were more sensitive to UV-light compared to copolymers obtained in bulk and their ionomers.     

The formation of a cyclic diacetal of methyl alpha-D-mannopyranoside with a 16-membered macrocyclic loop

The X-ray structure of a diacetal with a 16-membered macrocyclic loop, which was obtained as a product of the condensation of methyl alpha-D-mannopyranoside and 1,4-bis(2-formylphenoxy)butane is presented together with polymeric compounds resulting from polycondensation; a similar polymer was formed in the reaction of methyl 2,3:4,6-di-O-salicylidene-alpha-D-mannopyranoside with 1,4-dibromobutane.     

A hydrocarbon anchored peptide that forms a chloride-selective channel in liposomes

The heptapeptide sequence Gly-Gly-Gly-Pro-Gly-Gly-Gly, when anchored to diglycolic acid derived (C18H37)2NCOCH2OCH2COOH, forms chloride-selective ion channels in phospholipid liposomes but the related heptapeptide Gly-Gly-Gly-Leu-Gly-Gly-Gly, and tripeptide Gly-Gly-Gly do not.     

An improved catalyst for ring-closing alkyne metathesis based on molybdenum hexacarbonyl/2-fluorophenol

[reaction: see text] An improved "instant" catalyst for ring-closing alkyne metathesis reaction is described. Catalyst formed in situ from molybdenum hexacarbonyl and 2-fluorophenol can be used without exclusion of air and moisture and shows high activity in metathesis of functionalized diynes. This system allows cyclization of substrates which were incompatible with previously known Mo(CO)(6)/phenol catalysts.     

Solute diffusion in fractured porous media with memory effects due to adsorption

Modelling of solute transport in fractured porous media is a subject of intensive research in many engineering disciplines, such as petroleum engineering, water resources management, civil engineering. Recent field and laboratory experiments show that, in presence of strong adsorption, the behaviour of solute penetrating into the fractured porous medium diverges from classical hypotheses, rendering impossible the adjustment of classical transport models. The aim of this paper is to develop a mathematical continuous model of solute transport, when strong adsorption of solute occurs on the grains of the porous matrix. The macroscopic model is obtained by upscaling the pore and the fracture behaviours, by using the multiple scale expansion method. We obtain a non-standard diffusion behaviour of solute which shows local non-equilibrium between transport in the fractures and in the porous matrix, as well as memory effects. To cite this article: J. Lewandowska et al., C. R. Mecanique 330 (2002) 879–884.     

Oxidative Effects during Irreversible Electroporation of Melanoma Cells—In Vitro Study

Irreversible electroporation (IRE) is today used as an alternative to surgery for the excision of cancer lesions. This study aimed to investigate the oxidative and cytotoxic effects the cells undergo during irreversible electroporation using IRE protocols. To do so, we used IRE-inducing pulsed electric fields (PEFs) (eight pulses of 0.1 ms duration and 2–4 kV/cm intensity) and compared their effects to those of PEFs of intensities below the electroporation threshold (eight pulses, 0.1 ms, 0.2–0.4 kV/cm) and the PEFs involving elongated pulses (eight pulses, 10 ms, 0.2–0.4 kV/cm). Next, to follow the morphology of the melanoma cell membranes after treatment with the PEFs, we analyzed the permeability and integrity of their membranes and analyzed the radical oxygen species (ROS) bursts and the membrane lipids’ oxidation. Our data showed that IRE-induced high cytotoxic effect is associated both with irreversible cell membrane disruption and ROS-associated oxidation, which is occurrent also in the low electric field range. It was shown that the viability of melanoma cells characterized by similar ROS content and lipid membrane oxidation after PEF treatment depends on the integrity of the membrane system. Namely, when the effects of the PEF on the membrane are reversible, aside from the high level of ROS and membrane oxidation, the cell does not undergo cell death.     

Comparison of the Effects of Conching Parameters on the Contents of Three Dominant Flavan3-ols,Rheological Properties and Sensory Quality in Chocolate Milk Mass Based on Liquor from Unroasted Cocoa Beans

The content of polyphenols in chocolate depends on many factors related to the properties of raw material and manufacturing parameters. The trend toward developing chocolates made from unroasted cocoa beans encourages research in this area. In addition, modern customers attach great importance to how the food they consume benefits their bodies. One such benefit that consumers value is the preservation of natural antioxidant compounds in food products (e.g., polyphenols). Therefore, in our study we attempted to determine the relationship between variable parameters at the conching stage (i.e., temperature and time of) and the content of dominant polyphenols (i.e.,catechins, epicatechins, and procyanidin B2) in chocolate milk mass (CMM) obtained from unroasted cocoa beans. Increasing the conching temperature from 50 to 60 °C decreased the content of three basic flavan-3-ols. The highest number of these compounds was determined when the process was carried out at 50 °C. However, the time that caused the least degradation of these compounds differed. For catechin, it was 2 h; for epicatechin it was 1 h; and for procyanidin it was 3 h. The influence of both the temperature and conching time on the rheological properties of chocolate milk mass was demonstrated. At 50 °C, the viscosity and the yield stress of the conched mass showed its highest value.     

Immobilisation of tyrosinase on siliceous cellular foams affording highly effective and stable biocatalysts

Tyrosinase from Agaricus bisporus was immobilised covalently on mesostructured siliceous foam (MCF) and three mesoporous silicas of SBA-15 type of different pore sizes, regarded as the reference, to reveal that MCF was the superior enzyme support. All the carriers were functionalised using 3-aminopropyltrimethoxysilane and the enzyme was attached covalently via glutaraldehyde or by simple adsorption and it was also cross-linked with glutaraldehyde in selected samples. The experiments indicated that only tyrosinase attached covalently was highly active and that postimmobilisation cross-linking slightly reduced its activity with no improvement in stability. MCF-bound tyrosinase was the best biocatalyst with monophenolase and diphenolase activities of 3627 U mL^?1 and 53040 U mL^?1 of carrier sediment, respectively. Inactivation studies at 55°C showed that MCF-bound tyrosinase was 20 times more stable than the native enzyme, whereas for typical SBA-15 it was only 12 times. A comparative study with other, non-siliceous enzyme supports indicated that aminated MCF appeared to be the carrier of choice for the covalent attachment of tyrosinase.