Melting and crystallization DSC profiles of milk fat depending on selected factors

The aim of this study was to test selected factors, such as sample preparation and measurement procedure, potentially influencing repeatability of DSC analysis of milk fat melting and crystallization. The study investigated the effect of such factors as scanning rate, type of sample pans, method of butter dehydration, and final temperature in the cooling experiment. Based on recorded results, it was observed that cooling rate has a considerable effect on temperature, enthalpy, and height of peaks in the process of milk fat crystallization, as well as peak height and enthalpy in the melting process. By contrast, in the melting process no significant differences were observed in all measured temperatures in the range of heating rate of 2–20 °C min^?1 (p > 0.05). No statistically significant effect on thermodynamic parameters was found for sample pan type, the applied butter dehydration method and various final cooling temperatures (?60, ?50, and ?40 °C) either in the melting or crystallization processes. Only temperature of the second peak (T _c2) in the crystallization process constituted an exception in this respect, with significant differences (p ≤ 0.05) being recorded depending on the applied pan and dehydration method. With regard to the dehydration method, for the extraction and centrifugation methods the first peak forming during crystallization was characterized by high instability, manifested by various peak shape. Generally, it was found that the analysis of the melting and crystallization processes in milk fat, despite its complex composition, is characterized by high repeatability. Mean values of RSD calculated from all the experiments were very low, i.e., 1.8 % for the temperature in the melting process and 1.5 % in crystallization, 0.9 % for melting enthalpy, and 3.2 % for crystallization enthalpy, whereas for peak heights in melting it was 2.9 % and for crystallization it was 9.3 %, respectively.     

Quotients of peripherally continuous functions

We characterize the family of quotients of peripherally continuous functions. Moreover, we study cardinal invariants related to quotients in the case of peripherally continuous functions and the complement of this family.     

Comparison of ground and excited state polarizabilities of thiophene,cyclopentadiene, and fulvene oligomers and their cyano substituted derivatives—Ab initio study

Ab Initio study of the ground and excited state polarizabilities of thiophene, fulvene, and cyclopentadiene based conducting oligomers and their cyano derivatives have been performed using the restricted Hartree–Fock (RHF) and the configuration interaction singles (CIS) approaches, respectively, with 3‐21G* basis set. For comparison purposes, for some small oligomers (monomers and dimers), higher basis sets (6‐31G*, 6‐31+G*, aug‐cc‐pVTZ) were also employed in the computations of polarizabilities. The trends in polarizability as a function of oligomer length were investigated. For all systems, the RHF polarizability increases as n^1.2–1.3 as n gets larger and the CIS polarizability increases as n^1.4–1.6 for n less than seven or eight rings and then increases approximately linearly with n for larger n. For the thiophene based systems the dependence of the polarizability on bond length alternation (BLA) along the backbone of the oligomers was also investigated using the RHF, density functional (DFT), and CIS theories (with 3‐21G* basis set). For thiophene dimer, we also performed RHF/aug‐cc‐pVTZ calculations of polarizabilities versus BLA. We found that the polarizability is largest when BLA is near zero (for both ground and excited states), which correlates with the lowest excitation energy. Comparison with experimental results has been made where possible. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1983–1995, 2007     

A Mechanism of Efficient G6PD Inhibition by a Molecular Clip

Triple duty : A synthetic molecular clip traps nicotinamide adenine dinucleotide phosphate (NADP⁺; see picture) as well as occupying both the cofactor‐ and the substrate‐binding site in glucose‐6‐phosphate (G6P) dehydrogenase. This combination of two inhibition mechanisms makes the clip highly effective and selective for this enzyme over other dehydrogenases.

     

Determination of β-blockers and β-agonists using gas chromatography and gas chromatography-mass spectrometry--a comparative study of the derivatization step

There is a growing demand for the rapid screening of multiple β-blockers and β-agonists in a single analytical run in clinical toxicology, antidoping control, forensic and environmental science. Although GC-MS is very often used to determine pharmaceuticals from these groups of drugs, the literature data on the derivatization and MS analysis of mixtures of these compounds is limited. This paper compares and evaluates derivatization procedures for the determination of six β-blockers (acebutolol, atenolol, metoprolol, nadolol, propranolol, pindolol) and two β-agonists (salbutamol, terbutaline) using GC techniques. Nineteen different derivatizing reagents (nine of them used for the first time with almost all the drugs) were employed in order to obtain a single derivative for each target compound with the greatest effectiveness of this reaction. Trimethylsilylation, tert-butyldimethylsilylation, acylation (e.g. trifluoroacetylation), combined trimethylsilylation and acylation, and the formation of cyclized silyl derivatives were carried out and the mass spectra (EI, 70 eV) recorded. The influence of the reaction time and temperature on these procedures was investigated. Additionally, the effects of the type of solvent and the amount of added trimethylchlorosilane (TMCS) on the silylation of the target compounds using N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) were tested. Among of the five mentioned above derivatization procedures applied - trimethylsilylation was found to be the most effective for derivatizing the analytes. The best results were obtained with a 1:1 (v/v) mixture of 99% BSTFA+1% TMCS and ethyl acetate at 60 °C for 30 min. The MS data for different types of β-blocker and β-agonist derivatives is presented. The information in this paper is valuable for scientists working on the determination of β-blockers and β-agonists in biological and environmental matrices.     

The electrodeposition and properties of Zn-Ni + Ni composite coatings

The Zn-Ni+Ni coatings were deposited under galvanostatic conditions at the current density range from 20 to 60 mA cm^?2. The influence of deposition current density on surface morphology, chemical and phase composition and corrosion resistance of obtained coatings, was investigated. Structural investigations were conducted by X-ray diffraction method. Surface morphology and surface chemical composition of the obtained coatings were determined by a scanning electron microscope. Studies of electrochemical corrosion resistance were carried out in the 5% NaCl solution, using potentiodynamic and Scanning Kelvin Probe (SKP) methods. A possibility of incorporation of nickel powder from a suspension bath to the Zn-Ni matrix, during galvanostatic deposition was demonstrated. The results of chemical composition analysis show that the Zn-Ni + Ni coatings contain approximately 15?C18% at Ni. It was found that surface morphology, surface chemical and phase composition of Zn-Ni + Ni coatings depend in small degree on deposition current density. However, the current density influences distribution of nickel powder on the surface of these coatings. The optimal values of current density on account of corrosion resistance, are found to be j = 40?C50 mA cm^?2.     

Mechanisms of reaction in cytochrome P450: Hydroxylation of camphor in P450cam

The fundamental nature of reactivity in cytochrome P450 enzymes is currently controversial. Modelling of bacterial P450cam has suggested an important role for the haem propionates in the catalysis, though this finding has been questioned. Understanding the mechanisms of this enzyme family is important both in terms of basic biochemistry and potentially in the prediction of drug metabolism. We have modelled the hydroxylation of camphor by P450cam, using combined quantum mechanics/molecular mechanics (QM/MM) methods. A set of reaction pathways in the enzyme was determined. We were able to pinpoint the source of the discrepancies in the previous results. We show that when a correct ionization state is assigned to Asp297, no spin density appears on the haem propionates and the protein structure in this region remains preserved. These results indicate that the haem propionates are not involved in catalysis.     

Antiviral Potential of Plants against Noroviruses

Human noroviruses, which belong to the enterovirus family, are one of the most common etiological agents of food-borne diseases. In recent years, intensive research has been carried out regarding the antiviral activity of plant metabolites that could be used for the preservation of fresh food, because they are safer for consumption when compared to synthetic chemicals. Plant preparations with proven antimicrobial activity differ in their chemical compositions, which significantly affects their biological activity. Our review aimed to present the results of research related to the characteristics, applicability, and mechanisms of the action of various plant-based preparations and metabolites against norovirus. New strategies to combat intestinal viruses are necessary, not only to ensure food safety and reduce infections in humans but also to lower the direct health costs associated with them.     

Precompact,Totally Bounded and Bounded Filters

In this paper we examine various types filters that appear in the context of continuous relations, pseudo-uniform spaces and pseudotopological spaces. There arise compactoid, precompact, totally bounded, bounded and other filters. We study their properties and relationships among them.