Modelling relation between oxidation resistance and tribological properties of non-toxic lubricants with the use of artificial neural networks

The lubricants based on vegetable oils, as environmental friendly, are urgently sought. However, in addition to ecological characteristics, the lubricating properties have to be met. To meet these requirements the active additives influencing the lubricating properties and oxidation resistance are used. The useful lifetime of lubricants is determined largely by their abilities to resist oxidation. The article presented the results of new, ecological lubricants development. The oxidation performances of different developed lubricants have been tested. The experimentally determined oxidation stability of the compositions based on vegetable oils are presented. Analysed oxidation onset temperature was obtained from the differential scanning calorimetry (DSC) curves, which provides the rapid prediction of the oxidative stability of lubricants. Besides the lubricating composition based on vegetable oils, the developed greases-based mineral, or synthetic oil were investigated. The properties of these greases were evaluated using the measurement of parameters describing structure (penetration) and resistance to high temperature (dropping point). The lubricating properties of both the greases and vegetable oil compositions were tested on four-ball testing machine. In the results of the modelling of the lubricating properties the neural network models for the both types of the lubricants were developed. A discussion of the research results and analysis of models validity is given below. The experimental results are compared with the calculated using the neural models. An acceptable agreement was achieved.     

Volumetric and Surface Properties of Short Chain Alcohols in Aqueous Solution–Air Systems at 293?K

From measurements of the surface tension, density, viscosity and light scattering of aqueous solutions of methanol, ethanol and propanol at 293?K, their activity in the surface monolayer, surface excess concentration, and apparent and partial molar volume were determined. The surface excess concentration of alcohols at the water?Cair interface was determined from the Gibbs equation by using both the alcohol's activity and their molar fraction in the bulk phase and recalculated by using the Guggenheim?CAdam equation. The values of the surface excess concentration determined from the Gibbs equation were also applied to determine the standard Gibbs energy of alcohol adsorption at the water?Cair interface from Langmuir??s equation and compared to those determined from that of Aronson and Rosen.     

Molecular Weight Distribution in Living Polymerization Proceeding with Reshuffling of Polymer Segments due to Chain Transfer to Polymer with Chain Scission, 2. Monte Carlo Simulation of Polymer Reshuffling Proceeding with Disproportionation of Chain Functionalities

The method for analyzing the reshuffling of polymer segments developed previously has been extended to systems involving the disproportionation of chain functionalities. The effect of interchain exchange reactions of this type, leading to the redistribution of chain lengths and of the chain functionalities (redistribution of living and dead chain ends), was analyzed by means of the Monte Carlo simulations. In the systems, in which no propagation occurs (monomer concentration equal to zero), a set of polymer chains containing one living and one dead end was taken as an initial material. A series of simulations were performed for systems with differing molecular weight distributions of the starting macromolecules. Uniform (no chain length distribution polymer – all chains are of the same length), Poisson, and the most probable (geometric) distributions were taken into consideration. Although the molecular weight distributions (MWDs) of functionally different chains of the same polymer were different apart from the eventual equilibrium conditions, the overall MWD was very close to that observed in analogous systems without disproportionation. The same was observed concerning MWDs in modeled polymerization systems, in which reshuffling and disproportionation accompanied propagation. Consequently, a method of estimating the ratio of rate constants of propagation and reshuffling (i. e. k_p /k _tr) in the relevant polymerization systems, using the observed polydispersity indexes, was proposed. The extent of disproportionation can be evaluated from the determined relationships of the polydispersity index and of the monofunctional chains fraction as functions of the average number of chain transformations.     

Regioselective N-vinylation of cyclic thionocarbamates through a vinyl bis-sulfone methodology

A vinyl bis-sulfone Michael type approach towards heteroatom vinylation was applied on nitrogen derivatives. Cyclic thionocarbamates--mainly 1,3-oxazolidine-2-thiones--were converted into their N-vinyl counterparts; the procedure proved particularly efficient in the case of carbohydrate-derived complex structures.     

Chiral polymers containing a carbohydrate moiety: synthesis

This paper reports the preparation of poly(acetal-ethers) by two alternative synthetic pathways (alkaline and acid-catalyzed conditions). Polycondensations of methyl 2,3:4,6-di-O-salicylidene-alpha-D-mannopyranoside (3) (mixtures of endo-H and exo-H dioxolan-2-yl-diastereomers) with 1,4-dibromobutane (4) (method I a and I b) were performed in solvents (DMF, butyl acetate/DMF, DMSO) and were catalyzed by K2CO3/KI or KOH. A similar polymer (6) was formed by the reaction of methyl alpha-D-mannopyranoside (1) and 1,4-bis(2-formylphenoxy)butane (7), catalyzed by p-toluenesulfonic acid (method II). Regardless of conversion or initial comonomer feed ratios, the composition of the polycondensates depended on the reaction conditions, leading to the formation of macrocyclic [1 + 1] (5) and [2 + 2] compounds, which were macromolecules with diverse molecular weights and optical properties. The regioselective polycondensation was examined by 1H NMR spectroscopy of selected polymers. In the case of 5-membered cyclic acetal units, mixtures of the endo-H and exo-H dioxolan-2-yl system, diastereomers were formed in the polymer chain. The macrocycles and linear oligomers were identified by NMR and electrospray mass spectrometry (ESI-MS). Thermodynamically controlled reactions for making macrocycles as well as oligomers in the absence of templates are also discussed.     

Thermal degradation of copolymers based on selected alkyl methacrylates

The thermal stability and thermal degradation of copolymers based on selected alkyl methacrylates at temperatures between 250 and 400?°C have been studied using pyrolysis?Cgas chromatography. The type and composition of thermal degradation products gave useful information about the mechanism of pyrolysis of copolymers synthesized by using typical commercially available alkyl methacrylates. It was observed that the main thermal degradation products from alkyl methacrylate copolymers are monomers of alkyl methacrylates using by synthesis. Other pyrolysis by-products formed during thermal degradation were carbon dioxide, carbon monoxide, methane, ethane, methanol, ethanol, and propanol-1.     

A QM/MM study on the reaction pathway leading to 2‐Aceto‐2‐hydroxybutyrate in the catalytic cycle of AHAS

The reaction between the intermediate 2‐hydroxyethyl‐thiamin diphosphate (HEThDP^?) and 2‐ketobutyrate, in the third step of the catalytic cycle of acetodydroxy acid synthase, is addressed from a theoretical point of view by means of hybrid quantum/molecular mechanical calculations. The QM region includes one molecule of 2‐ketobutyrate, the HEThDP^? intermediate, and the residues Arg 380 y Glu 139; whereas the MM region includes the rest of the protein. The study includes potential energy surface scans to identify and characterize critical points on it, transition state search and activation barrier calculations. The results show that the reaction occurs via a two‐step mechanism corresponding to the carboligation and proton transfer in the first stage; and the product release in the second step. © 2014 Wiley Periodicals, Inc.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).