Determination of cefotaxime and desacetylcefotaxime in cerebrospinal fluid by solid-phase extraction and high-performance liquid chromatography

A microfluidic analytical system for the separation and detection of organic peroxides, based on a microchip capillary electrophoresis device with an integrated amperometric detector, was developed. The new microsystem relies on the reductive detection of both organic acid peroxides and hydroperoxides at -700 mV (vs. Ag wire/AgCl). Factors influencing the separation and detection processes were examined and optimized. The integrated microsystem offers rapid measurements (within 130 s) of these organic-peroxide compounds, down to micromolar levels. A highly stable response for repetitive injections (RSD 0.35-3.12%; n = 12) reflects the negligible electrode passivation. Such a "lab-on-a-chip" device should be attractive for on-site analysis of organic peroxides, as desired for environmental screening and industrial monitoring.     

Solid phase reactivity of sodium oxosalts of manganese

The observed relationships are presented of the solid phase reactivity of the following salts: NaMnO₄, Na₂MnO₄, Na₃MnO₄, Na₄MnO₄, Na₂MnO₃, Na₂Mn₂O₅, Na₅MnO₄, Na₄Mn₂O₅, NaMnO₂, Na₄MnO₃, Na₂MnO₂ and Na₂Mn₂O₃.     

RP-LC for Determination of Plastochromanol, Tocotrienols and Tocopherols in Plant Oils

An isocratic high performance liquid chromatographic method, with the application of C₁₈ and C₃₀ reverse-phase column and fluorescence detection, is described for the analysis of plastochromanol, tocotrienols and tocopherols in plant seed oils. The solvent systems have been optimized to obtain high resolution for all tocochromanols and relatively short analysis time. The use of reverse-phase columns for plastochromanol analysis, previously not reported, enables very sensitive and selective detection of plastochromanol which under the described separation conditions did not interfere with tocochromanols or any other compounds. The sample extraction method is fast, simple and highly efficient. The obtained results show that plastochromanol was present in most of the investigated seed oils. Its level was the highest in flax (17–30 mg/100 g oil), rape (8.5–9), camelina (4.3), peanut (1.95), corn (1.69) and grape (1.31) seed oils. Its level in the other investigated oils was below 1 mg/100 g oil, and only in sesame and coconut oils it was not detected. Tocotrienols were found in most of the oils but their content was usually very low (<<1 mg/100 g oil) with the exception of grape, milk thistle and corn oils where it reached >1 mg/100 g oil. Tocopherol content and isomer composition was within the earlier reported literature values for the investigated oils.     

Electrochemical Sensing of Pb2+ and Cd2+ Ions with the Use of Electrode Modified with Carbon-Covered Halloysite and Carbon Nanotubes

A novel voltammetric method for the sensitive and selective determination of cadmium and lead ions using screen-printed carbon electrodes (SPCEs) modified with carbon-deposited natural halloysite (C_Hal) and multi-walled carbon nanotubes (MWCNTs) was developed. The electrochemical properties of the proposed sensor were investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), while the morphology and structure were established by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). A two-factorial central composite design (CCD) was employed to select the composition of the nanocomposite modifying the electrode surface. The optimal measuring parameters of differential pulse anodic stripping voltammetry (DPASV) used for quantitative analysis were established with the Nelder–Mead simplex method. In the analytical investigation of Cd(II) and Pb(II) ions by DPASV, the MWCNTs/C_Hal/Nafion/SPCE exhibited a linear response in the concentration range of 0.1–10.0 µmol L⁻¹ (for both ions) with a detection limit of 0.0051 and 0.0106 µmol L⁻¹ for Pb(II) and Cd(II), respectively. The proposed sensor was successfully applied for the determination of metal ions in different natural water and honey samples with recovery values of 96.4–101.6%.     

Cebranopadol as a Novel Promising Agent for the Treatment of Pain

Opioids are used to treat pain, but despite their effectiveness, they possess several side effects such as respiratory depression, tolerance and physical dependence. Cebranopadol has been evaluated as a solution to this problem. The compound acts on the mu opioid receptor and the nociceptin/orphanin receptor and these receptors co-activation can reduce opioid side-effects without compromising analgesia. In the present review, we have compiled information on the effects of cebranopadol, its pharmacokinetics, and clinical trials involving cebranopadol, to further explore its promise in pain management.     

Engineering Gram Selectivity of Mixed‐Charge Gold Nanoparticles by Tuning the Balance of Surface Charges

Nanoparticles covered with ligand shells comprising both positively and negatively charged ligands exhibit Gram‐selective antibacterial action controlled by a single experimental parameter, namely the proportion of [+] and [?] ligands tethered onto these particles. Gram selectivity is attributed to the interplay between polyvalent electrostatic and non‐covalent interactions that work in unison to disrupt the bacterial cell wall. The [+/?] nanoparticles are effective in low doses, are non‐toxic to mammalian cells, and are tolerated well in mice. These results constitute the first example of rational engineering of Gram selectivity at the (macro)molecular level.     

Azo and azoxythiacrown ethers: synthesis and properties

A series of 16- and 18-membered azo- and azoxythiacrown ethers have been synthesized by reductive macrocyclization of the respective bis(nitrophenoxy)oxaalkanes. The aromatic residues located in the polyether region of the molecule were introduced to macrocyclic skeletons and their affinities toward different groups of metal cations in ion-selective electrodes were described. X-ray structures for one dinitropodand and one azoxybenzothiacrown exhibiting strong π–π and π–H interactions have been found.     

Physical and Sensory Properties of Japanese Quince Chips Obtained by Osmotic Dehydration in Fruit Juice Concentrates and Hybrid Drying

Japanese quince has high health value, but due to its taste and texture, it is difficult to eat raw. The use of innovative drying methods to produce dried snack foods from these fruits may be of interest to producers and consumers. The physicochemical and sensory properties of 3 mm slices of Japanese quince fruit (with skin, without seeds) obtained by osmotic pre-treatment in chokeberry and apple juice concentrates, and with the use of convection (convective drying, C-D), freeze-drying (F-D), and convection-microwave-vacuum drying (hybrid) are assessed. The methods of drying osmo-dehydrated slices do not affect the dry matter content. In most dried quince, the water activity is 0.40 or lower. Pre-osmotic dehydration and drying have a significant impact on the mechanical and acoustic properties of quince chips. Sensory attractive chips emit loud acoustic emission (AE) during the breaking test. Chips that are osmo-dehydrated in a mixture of chokeberry juice concentrate and sucrose and dried by a hybrid method are attractive. They have a dark red color given by chokeberry concentrate and a slight sweet (with a slight sour-bitter) taste. The sensory evaluation was useful for determining the quality of the chips in terms of their texture (crispness) tested by mechanical methods. Their sensory ratings (overall desirability as weight of color, taste, crispness, and flavor) are high and similar (from 3.8 to 4.1). The use of innovative drying methods with pre-osmotic treatment allows obtaining dried material with properties comparable to those obtained by the F-D method, but in a much shorter time, i.e., with lower energy and using a simple method.     

Emission Characteristics of the D.C., 100 kHz and 13.5 MHz Hollow Cathode Discharges

Hollow cathode discharges in argon at various pressures and currents have been studied by optical emission spectroscopy. The cathodes were made of copper, bronze and brass. The discharges were supplied by direct, 100 kHz and 13.5 MHz currents. Atomic and ionic spectra of plasma gas and elements of cathode materials and molecular bands of ZnH and PN formed due chemical reactions between plasma components have been excited and measured. Relations between emission intensities, excitation temperatures and discharge conditions have been analysed and discussed.