Synthesis of an advanced intermediate en route to the mitomycin natural products

[Structure: see text] An advanced intermediate in our planned synthesis of mitomycin C has been acquired in nine steps from tert-butyl glyoxylate. The aziridinyl pyrrolidine and quinone subunits are coupled regioselectively to arrive at an enamine that is prepared for C10 homologation.     

Design of liquid crystals with ‘de Vries-like’ properties: the effect of an ethynyl spacer in the core structure

We investigate the origins of ‘de Vries-like’ liquid crystalline behaviour by introducing an ethynyl spacer in the core of the tricarbosilane-terminated 5-phenylpyrimidine mesogens QL16-6 and QL17-6. The rationale for this structural change is based on the assumption that an ethynyl spacer would create more free volume in the core sub-layer and therefore decrease the orientational order parameter S₂ in the SmA phase. The tricarbosilane-terminated mesogens WL41-5 and WL42-6 with a 5-(phenylethynyl)pyrimidine core in either a normal or inverted orientation were synthesised, and their mesomorphic and ‘de Vries-like’ properties characterised using polarised optical microscopy, differential scanning calorimetry, birefringence measurements, small–angle (SAXS) and 2D X-ray scattering. Reduction factors R derived from SAXS and optical tilt angle measurements suggest that neither WL41-5 (R = 0.49) nor WL42-6 (R = 0.80) exhibit ‘de Vries-like’ properties. The S₂(T) profiles show an increase in orientational order with decreasing temperature and a sharp discontinuity at the SmA-SmC transition, which is consistent with ‘de Vries-like’ behaviour. However, the L_eff(T) profiles suggest an increase in interdigitation that reduces the positive effect of increasing S₂ in compensating for the molecular tilt.     

Cell‐Laden Hydrogels for Multikingdom 3D Printing

Living materials are created through the embedding of live, whole cells into a matrix that can house and sustain the viability of the encapsulated cells. Through the immobilization of these cells, their bioactivity can be harnessed for applications such as bioreactors for the production of high‐value chemicals. While the interest in living materials is growing, many existing materials lack robust structure and are difficult to pattern. Furthermore, many living materials employ only one type of microorganism, or microbial consortia with little control over the arrangement of the various cell types. In this work, a Pluronic F127‐based hydrogel system is characterized for the encapsulation of algae, yeast, and bacteria to create living materials. This hydrogel system is also demonstrated to be an excellent material for additive manufacturing in the form of direct write 3D‐printing to spatially arrange the cells within a single printed construct. These living materials allow for the development of incredibly complex, immobilized consortia, and the results detailed herein further enhance the understanding of how cells behave within living material matrices. The utilization of these materials allows for interesting applications of multikingdom microbial cultures in immobilized bioreactor or biosensing technologies.     

Computational design, synthesis and biological evaluation of para-quinone-based inhibitors for redox regulation of the dual-specificity phosphatase Cdc25B

Quinoid inhibitors of Cdc25B were designed based on the Linear Combination of Atomic Potentials (LCAP) methodology. In contrast to a published hypothesis, the biological activities and hydrogen peroxide generation in reducing media of three synthetic models did not correlate with the quinone half-wave potential, E(1/2).     

Free radical-mediated aryl amination: convergent two- and three-component couplings to chiral 2,3-disubstituted indolines

5-exo-trig Cyclization of an aryl radical to the nitrogen of an azomethine is used as the key annulating step in a modular preparation of 2,3-cis- and trans-disubstituted indolines. The precursors are readily prepared by phase-transfer-catalyzed Michael addition of a glycine Schiff base to a variety of acceptors. When the more reactive alkylidene malonate Michael acceptors are implemented, a one-pot three-component coupling is possible. The net result is a convergent [3 + 2] coupling strategy for the construction of highly functionalized indolines, a substructure occurring in numerous biologically active natural products.     

Bimolecular radical termination: New perspectives and insights

The reversible addition‐fragmentation chain transfer‐chain length dependent termination (RAFT‐CLD‐T) method has allowed us to answer a number of fundamental questions regarding the mechanism of diffusion‐controlled bimolecular termination in free‐radical polymerization (FRP). We carried out RAFT‐mediated polymerizations of methyl acrylate (MA) in the presence of a star matrix to develop an understanding of the effect of polymer matrix architecture on the termination of linear polyMA radicals and compared this to polystyrene, polymethyl methacrylate, and polyvinyl acetate systems. It was found that the matrix architecture had little or no influence on termination in the dilute regime. However, due to the smaller hydrodynamic volumes of the stars in solution compared to linear polymer of the same molecular weight, the gel onset point occurred at greater conversions, and supported the postulate that chain overlap (or c*) is the main cause for the observed autoacceleration observed in FRP. Other theories based on “short–long” termination or free‐volume should be disregarded. Additionally, since our systems are well below the entanglement molecular weight, entanglements should also be disregarded as the cause of the gel onset. The semidilute regime occurs over a small conversion range and is difficult to quantify. However, we obtain accurate dependencies for termination in the concentrated regime, and observed that the star polymers (through the tethering of the arms) provided constriction points in the matrix that significantly slow the diffusion of linear polymeric radicals. Although, this could at first sight be postulated to be due to reptation, the dependencies showed that reptation could be considered only at very high conversions (close to the glass transition regime). In general, we find from our data that the polymer matrix is much more mobile than what is expected if reptation were to dominate. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3155–3173, 2008     

Ruthenium porphyrin functionalized single-walled carbon nanotube arrays--a step toward light harvesting antenna and multibit information storage

Ruthenium porphyrin functionalized single-walled carbon nanotube arrays have been prepared using coordination of the axial position of the metal ion onto 4-aminopyridine preassembled single-walled carbon nanotubes directly anchored to a silicon(100) surface (SWCNTs-Si). The formation of these ruthenium porphyrin functionalized single-walled carbon nanotube array electrodes (RuTPP-SWCNTs-Si) has been monitored using infrared spectroscopy (IR), differential pulse voltammetry (DPV), atomic force microscopy (AFM), laser desorption time-of-flight mass spectroscopy (LDI-TOF-MS), UV-vis spectroscopy, fluorescence spectroscopy, and cyclic voltammetry. Electrochemical results show two successive one-electron reversible redox waves. The surface concentration of the ruthenium porphyrin molecules is 3.44 x 10 (-8) mol cm (-2). Optical results indicate that the immobilization of ruthenium porphyrin enhances the light absorption of SWCNTs-Si surfaces in the visible light region. Moreover mixed assembly of ferrocene/porphyrin onto carbon nanotube arrays has been achieved by altering the ratio of two redox-active species in the deposition solution. These results suggest the ruthenium porphyrin modified electrodes are excellent candidates for molecular memory devices and light harvesting antennae.     

A diastereo- and enantioselective synthesis of alpha-substituted syn-alpha,beta-diamino acids

Highly diastereo- and enantioselective additions of substituted alpha-nitroesters to imines have been developed. High diastereoselection relies on the finding that the combination of chiral proton catalyst 2b and alpha-nitro aryl esters bearing 2,6-disubstitution combine to raise substrate-controlled diastereoselection to >20:1 in favor of the syn diastereomer. Furthermore, the chiral catalyst provides enantioselection to the 99% level through control of the addition step in which the azomethine pi-faces are differentiated. The bifunctional chiral protic acid catalyst enables these reactions to proceed without separate preactivation of either substrate, leading to a straightforward synthetic protocol for the formation of alpha,beta-diamino phenyl alanine derivatives.     

<Superscript>57</Superscript>Fe emission Mössbauer spectroscopy following dilute implantation of <Superscript>57</Superscript>Mn into In <Subscript>2</Subscript>O<Subscript>3</Subscript>

Emission Mössbauer spectroscopy has been utilised to characterize dilute ⁵⁷Fe impurities in In ₂O₃ following implantation of ⁵⁷Mn (T _1/2 = 1.5 min.) at the ISOLDE facility at CERN. From stoichiometry considerations, one would expect Fe to adopt the valence state 3 + , substituting In ³⁺, however the spectra are dominated by spectral lines due to paramagnetic Fe²⁺. Using first principle calculations in the framework of density functional theory (DFT), the density of states of dilute Fe and the hyperfine parameters have been determined. The hybridization between the 3d-band of Fe and the 2p band of oxygen induces a spin-polarized hole on the O site close to the Fe site, which is found to be the cause of the Fe²⁺ state in In ₂O₃. Comparison of experimental data to calculated hyperfine parameters suggests that Fe predominantly enters the 8b site rather than the 24d site of the cation site in the Bixbyite structure of In ₂O₃. A gradual transition from an amorphous to a crystalline state is observed with increasing implantation/annealing temperature.