Controllable synthesis of high aspect ratio Mg_2B_2O_5 nanowires and their applications in reinforced polyhydroxyalkanoate composites

Highly pure magnesium borate （Mg2B2O5） nanowires with an average diameter of - 30 nm, an average length of 15 μm, and a high aspect ratio of - 500 have been synthesized on a large scale via a two-step method. MgBO2（OH） nanowires with high aspect ratios were first prepared via a PVP-assisted hydrothermal technique. Using these nanowires as precursors, single crystalline Mg2B205 nanowires were synthesized by post-annealing treatment at a relatively low temperature of 700 ℃. The important effect of the MgBO2（OH）-Mg2B2O5 conversion process on the morphology of the Mg2B2O5 nanowires was investigated and it was indicated that the recrystallization process plays an important role in the protection of the one-dimensional （1D） nanostructure. Moreover, the rigidity and the toughness of the Mg2B2O5 nanowire- reinforced PHA composites were tremendously improved compared to those of the pure PHA. Our results demonstrate the effectiveness of Mg2B2O5 nanowires for reinforcement applications in polymer composites.     

Dark soliton in one-dimensional Bose–Einstein condensate under a periodic perturbation of trap

The perturbation of a confining trap leads to the collective oscillation of a Bose--Einstein condensate, thereby the propagation of a dark soliton in the condensate is affected. In this study, periodic perturbation is employed to match the soliton oscillation. We find that the soliton dynamics depends sensitively on the coupling between the moving direction of the trap and that of the soliton. The soliton energy/depth evolves periodically, and a relevant shift in the soliton trajectory occurs as compared with the unperturbed case. Overall, the soliton oscillation frequency changes little even if the perturbation amplitude and frequency vary.     

The giant dielectric tunability effect in bulk Y<Subscript>2</Subscript>NiMnO<Subscript>6</Subscript> around room temperature

The effect of applied dc bias electric field on dielectric permittivity in bulk Y₂NiMnO₆ is investigated in this paper. It is found that a small bias field of 40 V/cm can greatly reduce the dielectric permittivity around the room temperature, compared to the much larger electric field that is required for conventional ferroelectric materials. The observed giant dielectric tunability is retained over a broad range of around room temperature and is most likely related to the charge ordering of Ni²⁺ and Mn⁴⁺ ions. This may further confirm the existence of electronic ferroelectricity in Y₂NiMnO₆.     

A new car-following model with consideration of roadside memorial

In this Letter, a car-following model with consideration of roadside memorial is proposed. The numerical results show that the proposed model can qualitatively describe the impacts of roadside memorial on traffic flow and the traffic risk coefficient. It is also shown that roadside memorial can enhance the traffic safety.     

Full scale model investigation on the acoustical protection of a balcony-like façade device (L)

The acoustical insertion losses produced by a balcony-like structure in front of a window are examined experimentally. The results suggest that the balcony ceiling is the most appropriate location for the installation of artificial sound absorption for the purpose of improving the broadband insertion loss, while the side walls are found to be the second best. Results also indicate that the acoustic modes of the balcony opening and the balcony cavity resonance in a direction normal to the window could have a great impact on the one-third octave band insertion losses. The maximum broadband road traffic noise insertion loss achieved is about 7 dB.     

Non-specular reflection of self-collimated beams in photonic-crystal-made prism and waveguide system

We demonstrate a dual-beam-reflection phenomenon for a Gaussian beam illuminating at a Kretschmann configuration composed of a photonic-crystal-made prism and a dielectric waveguide. One reflection beam has a positive shift and the other has a negative shift. The finite-difference time-domain (FDTD) shows that the specific phenomenon takes place only when the corresponding quasi-guided mode supported in the Kretschmann configuration is excited. Field profile of the quasi-guided mode demonstrates a strong localized stationary field in the dielectric waveguide. We found that the maximum positive lateral shift (LS) is 14.27a (where a is the lattice constant), corresponding to 3.07 times of the incident wavelength, which is 0.7135 times of the beam waist and much larger than that in some previous reports.     

膜厚监控系统的光谱宽度对窄带滤光片性能的影响

讨论了膜厚监控系统的光谱宽度对波分复用窄带滤光片特性的影响,分析了监控过程中所出现的信号异常现象,其主要原因是控制光光谱宽度以及控制波长与滤光片中心波长不一致,所以控制光光谱分辨率必须小于单个法布里-珀罗滤光片最后2层膜折转点波长宽度的一半,即对100GHz的滤光片,监控系统的光谱宽度必须小于0．2nm。一旦产生中心波长偏离,就必定产生厚度控制误差。讨论了高折射率膜和低折射率膜的信号变化规律,发现当中心波长比监控波长长时,虽然信号变化规律正确,但判读到极值时的膜厚变薄。中心波长偏离越长,厚度将越薄。而当中心波长比监控波长短时,信号将出现反转。中心波长越短,反转量越大。最后指出了监控误差对滤光片Tmax和半峰全宽的影响。     

Surface grafting density analysis of high anti-clotting PU-Si-g-P(MPC) films

Well-defined zwitterionic polymer brushes with good blood compatibility were studied, grafted from polyurethane (PU) substrate (PU-Si-g-P(MPC)) by surface-initiated reverse atom transfer radical polymerization (SI-RATRP). We found that the structure of polymer brushes and hence their properties greatly depend on the grafting density. To solve the problems of the normal method for grafting density measurement, i.e., more requirements for qualified and proficient instrument operator, we established an effective and feasible way instead of the conventional method of spectroscopic ellipsometer combined with gel permeation chromatograph (ELM/GPC) to calculate the grafting density of PU-Si-g-P(MPC) films by using a software named ImageJ 1.44e in combination with scanning electronic microscope (SEM) or atomic microscope (AFM). X-ray photoelectron spectroscopy (XPS), SEM and AFM were employed to analyze the surface topography and changes of elements before and after graft modification of the synthetic PU-Si-g-P(MPC) biofilms.     

MECO超导磁体支撑和冷屏的热流体计算

μ介子转化为电子实验装置(MECO)是美国能源部目前在建的一个高能物理项目。本文提出了MECO中的PS、TS1、TS2、DS四个超导螺线管磁体支撑和冷屏新的冷却方案,设计了支撑和冷屏的冷却结构。采用三维仿真方法,计算得到新方案下磁体冷质量的热负荷,并计算了50K冷却氦流质量流量、压降的大小以及冷屏上温度分布。从而为冷却结构设计和制定的新方案提供可靠的理论依据。     

成对力做功问题

设有两个质点，质量分别为m1和m2，F1为质点1受到质点2的作用力，F2为质点2受到质点1的的位移是dr2，由矢量合成法则，可以看出dr2=dr1 dr’，dr’表示质点2对于质点1的相对位移，如图1所示．用dA1与dA2表示F1与F2所做的元功，