Surface layering in ionic liquids: an X-ray reflectivity study

The surface structure and thermodynamics of two ionic liquids, based on the 1-alkyl-3-methylimidazolium cations, were studied by X-ray reflectivity and surface tensiometry. A molecular layer of a density approximately 18% higher than that of the bulk is found to form at the free surface of these liquids. In common with surface layering in liquid metals and surface freezing in melts of organic chain molecules, this effect is induced by the lower dimensionality of the surface. The concentrations of the oppositely charged ions within the surface layer are determined by chemical substitution of the anion. The temperature-dependent surface tension measurements reveal a normal, negative-slope temperature dependence. The different possible molecular arrangements within the enhanced-density surface layer are discussed.     

A general microcantilever surface modification method using a multilayer for biospecific recognition

The key to microcantilever surface modification technology is to selectively modify one side of a microcantilever surface with molecular recognition layers. In this paper, we report a general microcantilever modification method using a multilayer film.     

Direct observation of eta 2-imine formation through beta-H abstraction between amide ligands. Neutron and X-ray diffraction structure of a dihydride imine ditantalum complex

Reactions of Ta(NMe2)5 with D2SiR'Ph (R' = Me, Ph) were found to give a dideuteride eta 2-imine complex (Me2N)3Ta(mu-D)2(mu-N-eta 2-N,C-CH2NMe)Ta(NMe2)3(1-d2) through C-H activation of an amide ligand via beta-H abstraction, and the structure of 1 was confirmed by single crystal neutron and X-ray diffraction.     

Substituted pyridines

5-Methyl-4-phenyl-2-styryipyridine has been oxidized to 5-methyl-4-phenylpyridinie-2-carboxylic acid. The decarboxylation of this acid has given 3-methyl-4-phenylpyrldine. To prove the structure of -(5-methyl-4-phenyl-2-pyridyl)acetophenone, it has been converted into 2, 5-dimethyl-4-phenylpyridine. The reaction of benzyl chloride with the lithium derivative of 2, 5-dimethyl-4-phenylpyridine has been studied. 3,7-Dimethyl-2-azafluorene has been obtained from 2,5-dimethyl-4-p-tolylpyridine.     

Laser spectroscopy of Si3C

The C 1B1<--X 1A1 band system of the potential interstellar species Si3C has been recorded in a silane/acetylene discharge by resonant two-color two-photon ionization spectroscopy. The origin band is located near 24,925 cm-1 (3.09 eV). Several other features in the spectrum are assigned to progressions in the Si-Si stretching modes as well as to sequence and hot band transitions. The assignment was facilitated by ab initio calculations, which also indicate that this is the strongest electronic transition of Si3C in the visible region of the spectrum. Features in the spectrum are broadened considerably (ca. 10 cm-1), and suggest an excited state lifetime of a few picoseconds. Possible reasons for the short-lived nature of the excited state are discussed.     

Aerial oxidation of primary alcohols and amines catalyzed by Cu(II) complexes of 2,2'-selenobis(4,6-di-tert-butylphenol) providing [O,Se,O]-donor atoms

Seven copper(II)-complexes 1-7 with the ligand 2,2'-selenobis(4,6-di-tert-butylphenol) providing [O,Se,O]-donor atoms have been isolated and characterized. Three of them 1, 2 and 3 are mononuclear, two 4 and 7 dinuclear and 5, 6 are trinuclear. The crystal structures of the complexes were determined by X-ray diffraction and the electronic structures were established by various physical methods including EPR and variable temperature (2-290 K) susceptibility measurements. The magnetic behaviour of the compounds 4-6 exhibits antiferromagnetic exchange coupling resulting in well-isolated S(t)= 1/2 ground state for 5 and 6 and a diamagnetic spin state for 4. Complexes 5 and 6 belong to the class of asymmetric trinuclear copper(II) complexes modelling the trinuclear copper site in multicopper oxidases. Complex 1 is a catalyst in the presence of a strong base for the aerial oxidation of primary alcohols to the corresponding aldehydes. A dinuclear complex, seemed to be 4, prepared in situ has been found to be a catalyst for the aerial oxidation of primary amines containing alpha-C-H atoms. Primary kinetic isotope effects show that H-abstraction from the alpha-carbon atom of a coordinated substrate (alcoholato or amine) is the rate-determining step in both cases. Two functional models for the metalloenzymes galactose oxidase and amine oxidases are thus described.     

Organic molecular beam deposition of oligophenyls on Au111: A study by X-ray absorption spectroscopy.

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy has been applied to reveal the molecular arrangement of ultrathin oligophenyl films [p-quaterphenyl (4P) and p-hexaphenyl (6P)] on Au(111). In the half-monolayer films the molecules lie flat on the surface but still have a considerable inter-ring twist of 30 degrees -40 degrees , similar to the gas-phase conformation. In the saturated monolayer film the second half of the molecules is side-tilted by an angle of less than 66 degrees with respect to the surface. This arrangement is already similar to that in bulk net planes of thicker films parallel to the surface, that is, the 4P(211) and 6P(21-3) planes, respectively.     

The measurement of high proton affinities for a variety of metallic compounds: a new approach by flame-ion mass spectrometry

A small amount (≤ 10⁻⁶ mol fraction) of four alkaline earth metals, tin and yttrium were introduced into five, premixed, fuel-rich, H₂–O₂–N₂ flames at atmospheric pressure in the temperature range 1820–2400 K. Aqueous salt solutions of the metals were sprayed into the premixed flame gas as an aerosol using an atomizer technique. Ions in a flame were observed by sampling flame gas through a nozzle into a mass spectrometer. The concentrations of the major neutral metallic species present in the flame were calculated from thermodynamic data currently available. The principal metallic ions observed were AOH⁺ (A = Mg, Ca, Sr, Ba, Sn) and A(OH)₂⁺ (A = Y), formed initially by proton transfer to AO and OAOH from H₃O⁺, a natural flame ion. Except for Mg, the ions were also produced by chemi-ionization processes. By adjusting the concentration(s) of the salt solution in the atomizer, it was found that a pair of ions could be brought into equilibrium within the time scale of the flame; the pairs included H₃O⁺ with a metal ion or two metallic ions. Because water is a major product of combustion, a very large difference in proton affinity PA⁰(AO) − PA⁰(H₂O) ≤ 490 kJ mol⁻¹ (117 kcal mol⁻¹) could be attempted for the proton transfer equilibrium. Using PA⁰(H₂O) = 691.0 kJ mol⁻¹ (165.2 kcal mol⁻¹) as a reference base to anchor the proton affinity scale, ion ratio measurements led to proton affinity PA⁰ values of 766, 912, 1004, 1184, 1201, and 1222 kJ mol⁻¹ (183, 218, 240, 283, 287, and 292 kcal mol⁻¹) corrected to 298 K for OYOH, SnO, MgO, CaO, SrO, and BaO, respectively; of these, only the value for OYOH has not been reported previously. If it is assumed that the neutral thermodynamic data are correct (although some appear to be in error), the uncertainties in the PA results reported here are ± 21 kJ mol⁻¹ (5 kcal mol⁻¹). The realization that these equilibria can be achieved in flames provides a new approach to consolidate and build the high end of the proton affinity ladder, primarily of metallic species which are not accessible at lower temperatures.     

Quantitative millimetre wavelength spectrometry at pressures approaching atmospheric: II. Determination of oxygen at atmospheric pressure

A millimetre wavelength (MMW) Fabry-Perot cavity spectrometer described in earlier work has been applied to the measurement of oxygen absorption at 60 GHz and atmospheric pressure in a gas matrix of nitrogen. The spectrometer has also been modified such that the MMW source is stabilised by a sub-harmonic microwave signal transmitted by an infrared carrier on a single mode telecommunications fibre optic. This is a step towards developing an instrument comprising minimal electronic components that can perform MMW spectrometry remotely. Oxygen determinations were achieved by monitoring the change in the quality factor (Q) of a resonant Fabry-Perot cavity due to the presence of an absorbing sample. The MMW absorption of the sample was determined by incrementing the frequency modulation (FM) deviation of the source frequency scanning the cavity resonance profile. The response curve of absorption signal versus fraction of oxygen in nitrogen was found to be linear throughout the working range of 1-100% O₂ (v/v) in N₂ with a slope of (1.407±0.007)×10⁻⁴ m⁻¹ (% O₂)⁻¹. The detection limit (3× standard deviation of the background) was found to be ∼0.8% (v/v). The MMW technique employed is advantageous since, unlike common MMW techniques, there is no vacuum requirement. Application of this method, to the monitoring of oxygen in gas mixtures of practical importance, is proposed. Values of the oxygen spectral absorption coefficients of lines between 55 and 60 GHz were measured at reduced pressure and found to be within ±2% of previous literature values. A pressure correction coefficient for O₂ absorption at 60 GHz in the 45-121 kPa range was obtained and found to be (1.354±0.014)×10⁻⁴ m⁻¹ kPa⁻¹.     

Quantum chemical evaluation of protein control over heme ligation: CO/O2 discrimination in myoglobin

Control of O2 versus CO binding in myoglobin (Mb) is tuned by a distal histidine residue through steric and H-bonding interactions. These interactions have been evaluated via Car-Parrinello DFT calculations, whose efficiency allows full quantum mechanical treatment of the 13 closest residues surrounding the heme. The small (8 degrees ) deviation of the Fe-C-O bond angle from linearity results from the steric influence of a distal valine residue and not the distal histidine. H-bond energies were evaluated by replacing the distal histidine with the non-H-bonding residue isoleucine. Binding energies for CO and O2 decreased by 0.8 and 4.1 kcal/mol for MbCO and MbO2, in good agreement with experimental H-bond estimates. Ligand discrimination is dominated by distal histidine H-bonding, which is also found to stabilize a metastable side-on isomer of MbO2 that may play a key role in MbO2 photodynamics.