The comparison of detailed chemical kinetic mechanisms: Application to the combustion of methane

Detailed chemical kinetic mechanisms of complex chemical phenomena may be composed of hundreds of species and thousands of individual elementary reactions. It can be an extremely laborious and error‐prone procedure to compare two of these mechanisms, particularly if they come from different sources. We have created software tools which help to highlight the differences between mechanisms written in a Chemkin format and demonstrate their applicability to five literature mechanisms describing the high temperature oxidation of methane. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36:467–471, 2004     

A new set of high speed matrix addressing schemes for ferroelectric liquid crystal displays

A new set of matrix addressing schemes for ferroelectric liquid crystal displays is reported. The schemes use the minimum in the response time-voltage characteristic found in certain mixtures and deliver improved operating speed and contrast ratio compared with previously reported schemes operating in this mode.     

Large-scale computer simulation of fully developed turbulent channel flow with heat transfer

Recently, with the advent of supercomputers, there has been considerable interest in the use of direct numerical simulation to obtain information about turbulent shear flow at low Reynolds number. This paper presents a pseudospectral technique to solve the full three-dimensional time-dependent Navier-Stokes and advection-diffusion equations without the use of subgrid-scale modelling. The technique has not been previously used for fully developed turbulent channel flow simulation and is based on methods applied in other contexts. The emphasis of this paper is to provide a reasonably detailed account of how the simulation is done rather than to present new calculations of turbulence. The details of an algorithm for turbulent channel flow simulation and the grid and time step sizes needed to integrate through transient behaviour to steady state turbulence have not been published before and are presented here. Results from a Cray-2 simulation of fully developed turbulent flow in a channel with heat transfer are presented along with a critical comparison between experiment and computation. The first- and second-order moments agree well with experimental measurements; the agreement is poor for higher-order moments such as the skewness and flatness near the walls of the channel. Detailed information given about the effects of spatial grid resolution on a computed results is important for estimating the size of the computation required to study various aspects of a turbulent flow.     

The completely positive and doubly nonnegative completion problems

We prove the following. Let G be an undirected graph. Every partially specified symmetric matrix, the graph of whose specified entries is G and each of whose fully specified submatrices is completely positive (equal to BB^T for some entrywise nonnegative matrix B), may be completed to a completely positive matrix if and only if G is a block-clique graph (a chordal graph in which distinct maximal cliques overlap in at most one vertex). The same result holds for matrices that are doubly nonnegative (entrywise nonnegative and positive semidefinite).     

Fiber formation via solution spinning of the cellulose/ammonia/ammonium thiocyanate system

Fiber formation via the cellulose/ammonia/ammonium thiocyanate system by wet spinning has been investigated. This report presents a characterization of the structure and tensile properties of fibers spun under various coagulation conditions. Microscopic observations showed that the molecular size of coagulant was the dominant factor governing the crosssectional shape of the fibers. Density, birefringence, and crystallinity data indicated that a higher cellulose concentration and lower coagulation temperature favored development of a fiber with a denser and more oriented structure. Under optimum conditions, a welldefined fibrillar structure was obtained. Fiber tensile property measurements suggested the existence of a linear relationship between the fiber breaking tenacity and the product of the square of the Hermans' orientation factor and the infrared crystallinity index.     

Alternating copolyfluorenevinyles with polynuclear aromatic moieties: Synthesis,photophysics, and electroluminescence

Three new copolymers, namely poly(fluorenevinylene‐alt‐naphthalenevinylene) ( N ), poly(fluorenevinylene‐alt‐anthracenevinylene) ( A ) and poly(fluorenevinylene‐alt‐pyrenevinylene) ( P ), were synthesized by Heck coupling of 9,9‐dihexyl‐2, 7‐divinylfluorene with a polynuclear aromatic dibromide. The 9,10‐disubstituted anthracene was obtained exclusively for A while N and P were obtained as a mixture of two isomers with predominant the 1,4‐disubstituted naphthalene and 1,8‐disubstituted pyrene, respectively. The polymers were soluble in common organic solvents and decomposed above 370 °C. Their glass transition temperature increased from 58 to 110 °C by increasing the number of the phenyl rings of the polynuclear aromatic moiety. Rather high‐efficiency blue and blue‐greenish photoluminescence (PL) of these copolymers in solution was largely decreased in their films, indicating the presence of concentration quenching in the solid state. The OLED using these polymers demonstrated green EL in the case of copolymers N and A , and red EL in the P derivative with η_EL = 0.26–0.31%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4661–4670, 2007     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Kinetics of methylchlorosilane formation on Zn-promoted Cu3Si

The kinetics of the direct synthesis reaction (Si + 2CH₃Cl → (CH₃)₂SiCl₂) were measured on a Cu₃Si alloy containing 1.2 atom % Zn. Reaction was carried out in a differential reactor (520–595 K, 1 atm) attached to an ultrahigh vacuum (UHV) system. Auger spectroscopy was used to characterize the surface before and after reaction. Zinc does not significantly change the overall rate of reaction, but it changes selectivity to dimethyldichlorosilane (the desired product), surface composition, activation energies, and induction times. The rate of silicon diffusion to the surface is not limiting in the presence of zinc. Zinc is found to be a promoter for improved selectivity only in low concentrations, and only a fraction of the surface appears to be active for reaction. The kinetics appear relatively insensitive to the surface composition or the form of surface carbon. A Cu₃Si surface with Zn is shown to be a good model catalyst for the direct synthesis reaction.     

Coordinate transform invariance

A four-dimensional operator is shown to contain the operator-generators for rotation, scale, reflections, and boosts. The hypothesis is advanced that a physical system changes under this operator by at most a complex phase factor due to invariance against the choice of menial frame. A canonical transform gives a simple relation between space-time and energy-momentum. The basic conserved quantity is a four-dimensional angular momentum and/or coupling constant. The differential of this function contains a second-order differential product which is constrained as a power series in the independent variable. The analysis explores the consequences of the model and shows its degree of correspondence to the standard models.