The gas dynamics of current-limiting devices during immobility time

The aim of this paper is to extend our knowledge about the gas-dynamic processes in arcs during immobility time. For this purpose, the conservation equations in a magnetohydrodynamic approximation were coupled with the thermochemical and Maxwell equations. Special features arc the introduction of dissociation and ionization of nitrogen and oxygen, and the simultaneous calculation of the distributions of current density and magnetic induction in the arc. Numerical calculations were performed with a reduced two-dimensional (2-D) time-dependent model. Results of the calculations were compared with measurements. The development in time of the measured and calculated are voltage and arc chamber pressure show very good agreement. The pumping effect of the double vortex in the arc region was confirmed by optical measurements. It is concluded that the three-layer model is a good representation for the main physical features during the immobility time, and that the presence of highly conducting gas in the downstream region of the arc is essential for its downstream movement     

Classical versus Jennings model for the ground state of H near a metallic surface

We show that, contrary to earlier reports, application of the one-parameter variational technique to the classical (image) model for H in front of an Al surface leads to energy shifts for the ground state which are very close to those obtained numerically with a more sophisticated model of the system.     

Three-dimensional integrable models and associated tangle invariants

In this paper we show that the Boltzmann weights of the three-dimensional Baxter-Bazhanov model give representations of the braid group if some suitable spectral limits are taken. In the trigonometric case we classify all possible spectral limits which produce braid group representations. Furthermore, we prove that for some of them we get cyclotomic invariants of links and for others we obtain tangle invariants generalizing the cyclotomic ones.     

Measurement of cathode spot parameters with pulsed laserdiagnostics

The cathode spot formation in air within the first 170 ns was investigated by laser absorption photography and ps-pulse interferometry. The discharge was initiated between electrodes made from Ag or Pd with cathode-anode distance below 300 μm, the arc duration was some milliseconds, and the arc current 5-10 A. Picosecond holographic interferometry and momentary absorption photography yielded spatial-temporal density distributions in the ignition phase of the cathode spot. An absolute electron density value on the order of 4×10²⁶ m^-3 has been found. In contrast to vacuum, the cathode spot plasmas broaden little with increasing distance from the cathode, thus narrow plasma channels are observed in the vicinity of the cathode surface having diameters <20 μm     

The effect of radiofrequency modulation of 57Fe hyperfine interaction by rotating magnetic field

The effect of ⁵⁷Fe hyperfine interaction radiofrequency (rf) modulation by external rotating magnetic field was studied in thin Permalloy foil by means of Mössbauer spectroscopy. The rf effect was investigated as a function of intensity for several rf field frequencies. The experiments show that the external rotating rf field causes considerable changes in the hyperfine pattern. The obtained spectra are in disagreement with those obtained by Perlow [Phys. Rev. 172 (1968) 319]. They also are inconsistent with magnetostriction hypothesis. Proceeding from the Mössbauer spectrum analysis one may conclude that the magnetization of investigated foil changes its direction in a complex manner. However, the undertaken experiments show that the essential number of Mössbauer nuclei experience the rotating magnetic field influence.     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

The anomalous 3-boson couplings as an implication of the Higgs sector

We discuss the possible new electroweak interactions which may be generated by the Higgs sector at the scale of theZ mass. For this purpose, we give a set ofSU(2)×U(1) gauge invariant operators constructed in terms ofW, Z, γ and Higgs fields which in the unitary gauge describe all possible γWW andZWW anomalous couplings. The dimension of these operators varies from 6 to 12. This fact allows us to consider various scenaria for the manifestations of the New Physics. We conclude that the underlying dynamics induced by the Higgs sector can be tested through a model-independent amplitude analysis of gauge boson pair production at LEP2 and future colliders.     

Observation of ionic thermocurrents in zirconia-based solid electrolytes

In ionic conductors, long range-migrating charges are a main cause of polarization processes. This has complicated, up to date, the study of ionic thermocurrents (ITC) in solid electrolytes. However, the method is appealing, as it probes directly charge-formation phenomena that are important both from a scientific point of view and for applications. This work reports on the observation of ITC in solid electrolytes. Under appropriate experimental conditions, the ITC response of a zirconia sample electroded with platinum is a reproducible one, thus opening the way to a new characterization method that may complement other well established methods, such as Impedance Spectroscopy and a number of electrochemical techniques. The general trends of the response, which is composed of two well resolved ITC peaks, is discussed. One of them, taking place at higher temperatures, conforms to the standard shape of a first order kinetics depolarization process. Paper presented at the 2nd Euroconference on Solid State Ionics, Funchal, Madeira, Portugal, Sept. 10–16, 1995     

MO analysis of macroscopic supercurrent flow in MgB 2

We present results from an extended magneto-optical (MO) analysis of two samples cut from high-density pellets of MgB₂. The first sample was studied in order to show that no matter how large the sample is and despite the bulk granularity, the material enters into a critical state in a crystal-like fashion. The second sample was chosen for the quantitative analysis. A numerical approach based on an inverted 2D Biot-Savart model was used to calculate the current paths across the homogeneous polycrystalline bulk, as well as in the vicinity and across some morphological defects. Local current densities in the homogeneous part were estimated as a function of the applied magnetic field at different temperatures, in three regimes: below full penetration, at full penetration and above full penetration, respectively. A hypothesis of interpretation of the apparent absence of magnetic granularity inside the polycrystalline microstructure is presented. It is related to a critical state likely reached by a network of strongly coupled Josephson junctions. Received 31 May 2001 and Received in final form 5 December 2001     

A planar XeCl-exilamp pumped by a low-pressure glow discharge

The energy characteristics of an XeCl exciplex lamp with planar construction pumped by a low-pressure gas discharge are investigated experimentally. When a discharge gap of width 2 cm and a Xe-Cl₂ mixture were used, average radiation powers up to 20 mW were obtained in the wavelength interval 200–380 nm at efficiencies of ∼0.4%. In this case the total efficiency of radiation into an angle of 4π exceeded 4%. It is shown that increasing the working pressure and using low discharge currents can lead to “point” radiation sources. Zh. Tekh. Fiz. 67, 43–46 (December 1997)