Phase shift moiré studies of processing-induced residual strains in Nickel 200 spot welds

Processing-induced residual strains in solid cylinders of Nickel 200 were investigated using phase shifting moiré interferometry. Two different experimental approaches were used to study the strains produced during Tungsten-inert gas spot welding. A comparison of results for a ‘hot/fast’ and a ‘cool/slow’ weld demonstrate the capabilities of the general approach. Both experimental methods revealed distinct differences in the residual displacement and strain fields between the two types of welds.     

Investigation of acceptor centers in semiconductors with the diamond crystal structure by the μ − SR method

The residual polarization of negative muons in crystal silicon samples with phosphorus (P: 1.6×10¹³ cm⁻³) and antimony (Sb: 2×10¹⁸ cm⁻³) impurities is investigated. The measurements are made in a 1000 G magnetic field oriented in a direction transverse to the muon spin in the temperature range 4–300 K. The relaxation rate and shift of the precession frequency in the silicon sample with the phosphorus impurity are measured more accurately than previously. It is found that in antimony-doped silicon the acceptor center _μ A1 at temperatures below 30 K can be in both ionized and neutral states. The experimental data are interpreted on the basis of spin-lattice relaxation of the magnetic moment of an acceptor center, formation of acceptor-donor pairs, and recombination of charge carriers at the acceptor. Preliminary measurements showed a nonzero residual polarization of negative muons in germanium. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 1, 61–66 (10 July 1998)     

The electronic spectrum of a three-dimensional quasicrystal

The electronic spectrum of an icosahedral quasicrystal with a central-atom decoration of the Amman-Mackay network is investigated in the tight-binding approximation. The quasicrystal is described as a structural limit of the optimal cubic approximants with increasing period. The electronic spectra for the first four optimal cubic approximants do not contain the hierarchical gap structure which is typical for the Cantor set of the spectrum of a one-dimensional quasicrystal. At the same time, as the order of the approximant increases, the spectrum becomes singular throughout the entire energy scale. Pis’ma Zh. éksp. Teor. Fiz. 67, No. 8, 557–562 (25 April 1998) Published in English in the original Russian journal. Edited by Steve Torstveit.     

Investigation of microbial—mineral interactions by Mössbauer spectroscopy

Mössbauer spectroscopy was used to investigate the reactions of microbes with iron minerals in aqueous solutions and as components of rocks in banded iron formations and granite. A microbial biofilm that formed on a wall of an excavated granite vault in a deep underground laboratory initiated this research. At the aerobic face of the biofilm, iron was found in a form of ferrihydrite; in the anaerobic face against the rock, iron was found as very small siderite particles. Laboratory incubations of the biofilm microbial consortium showed different mineral species could be formed. When the microbial consortium from the biofilm was incubated with magnetite grains, up to about 10% of the iron was altered in three weeks to hematite. The ability of the consortium to precipitate iron both as Fe²⁺ and Fe³⁺ in close proximity may have a bearing on the deposition of banded iron formations. These reactions could also be important in microbially induced corrosion.     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

Inclusive production of neutral vector mesons in hadronic Z decays

A data sample of about 3.0 million hadronicZ decays collected by the ALEPH experiment at LEP in the years 1991 through 1994 is used to make an inclusive selection of B hadron events. In this event sample 4227±140±252B* mesons in the decayB*→Bγ and 1944±108±161B** _u,d mesons decaying into a B meson and a charged pion are reconstructed. Here and in the followingB** _u,d denotes the eightL=1(bū) and (bd) states and their charge conjugate. For the well establishedB* meson the following quantities are obtained:ΔM=M _B*−M_B=(45.30±0.35±0.87) MeV/c² andN _B*/(N _B+N _B*)=(77.1±2.6±7.0)%. The angular distribution of the photons in theB* rest frame is used to measure the relative contribution of longitudinalB* polarization states to beσ _L/(σ _L+σ _T)=(33±6±5)%.     

Vibrational control of crystal growth from liquid phase

Modeling and numerical simulations of the convective flows induced by the vibration of the monocrystal during crystal growth have been performed for two configurations simulating the Cz and FZ methods. This permitted to emphasize the role of different vibrational mechanisms in the formation of the average flows. It is shown that an appropriate combination of these mechanisms can be used to counteract the usual convective flows (buoyancy- and/or thermocapillary-driven) inherent to crystal growth processes from the liquid phase. While vibrational convection is rather complex due to these identified mechanisms, the new modeling used in the present paper opens up very promising perspectives to efficiently control heat and mass transfer during real industrial applications of crystal growth from the liquid phase.