Computer experiments on crystalline nylons: structural analysis of nylons with large aliphatic segments

A theoretical study based on force-field calculations has been performed to investigate the structural preferences of crystalline even nylons n with large and very large aliphatic segments. Atomistic energy calculations and Monte Carlo simulations were carried out considering the conventional and forms of nylons 10, 12, 18, 24, and 32. Results indicated that the form is the most favored for nylons 10, 12, 18, and 24. However, the structure was unstable for nylon 32, a polymer in which the density of hydrogen bonds is almost negligible. In this case, the arrangement is energetically more favored than the one.     

Simultaneous multichannel mass-specific detection for high-performance liquid chromatography using an array detector sector-field mass spectrometer

The use of a separation step, such as liquid chromatography, prior to inductively coupled plasma mass spectrometry (ICP–MS) has become a common tool for highly selective and sensitive analyses. This type of coupling has several benefits including the ability to perform speciation analysis or to remove isobaric interferences. Several limitations of conventional instruments result from the necessity to scan or pulse the mass spectrometer to obtain a complete mass spectrum. When the instrument is operated in such a non-continuous manner, duty cycle is reduced, resulting in poorer absolute limits of detection. Additionally, with scanning instruments, spectral skew can be introduced into the measurement, limiting quantitation accuracy. To address these shortcomings, a high-performance liquid chromatograph has been coupled to an ICP–MS capable of continuous sample introduction and simultaneous multimass detection. These features have been realized with a novel detector array, the focal plane camera. Instrument performance has been tested for both speciation analysis and for the elimination of isobaric interferences. Absolute limits of detection in the sub picogram to tens of picograms regime are obtainable, while the added mass dimension introduced by simultaneous detection dramatically increases chromatographic peak capacity.     

Identification of 4-amino-4-deoxychorismate synthase as the molecular target for the antimicrobial action of (6s)-6-fluoroshikimate

(6S)-6-Fluoroshikimate has antimicrobial activity. The molecular basis of this effect had not been identified, but there was speculation that (6S)-6-fluoroshikimate is first converted in vivo into 2-fluorochorismate, which then could inhibit 4-amino-4-deoxychorismate synthase (ADCS). 2-Fluorochorismate was prepared from E-fluorophosphoenolpyruvate and erythose-4-phosphate by the sequential reactions of DAHP synthase, dehydroquinate synthase, dehydroquinase, shikimate dehydrogenase, EPSP synthase, and chorismate synthase. Inhibition studies on ADCS showed that it was inhibited rapidly and irreversibly by 2-fluorochorismate. Electrospray mass spectrometry of the inactivated enzyme showed an additional mass of 198 +/- 10 Da. A novel peptide of 1087.6 Da was identified in the HPLC trace for the tryptic digest of 2-fluorochorismate-inactivated ADCS. Sequencing of this peptide by MS/MS showed that the peptide corresponded to residues 272-279 with a modification of 206.1 Da on Lys-274. This observation is particularly exciting in the context of a recent proposal for the catalytic mechanism of ADCS.     

On the solid state structure of 4-iodobenzoic acid

The solid-state structure of 4-iodobenzoic acid has been confirmed by variable temperature X-ray diffraction, variable temperature solid-state NMR and differential scanning calorimetry. 4-iodobenzoic acid crystallizes in the space group P2(1)/n, and dimerizes in the solid state about a center of inversion. Using extensive X-ray crystallographic data collections, the placement of the carboxylate H atoms from the residual electron density in difference Fourier maps was determined. The position of the electron density associated with the proton is found to vary with temperature in that the population of the disordered sites changes with varying temperature. Determination of the crystal structure between the temperatures of 248 and 198 K was not possible due to a phase transition, an endothermic event occurring at 230.77 K. The phase transition is also indicated by a change in the relaxation time of the ring carbon atoms in the solid-state NMR data. Though the dominating force in the dimeric unit in the solid state is the presence of strong hydrogen bonds, there are also van der Waals forces present between the iodine atoms. In the layered structure, the iodine-iodine distance is within the van der Waals contact radii, an interaction which causes a deformation in the electron density of the iodine atoms.     

The Saunders-Bell Analysis of Tunnel Effects in Reactions with Kinetic Isotope Effects

The primary kinetic isotope effects of deuterium were investigated in 22 hydrogen and deuterium transfer reactions, including enzymatic and nonenzymatic hydride transfer reactions, elimination reactions, and reactions catalyzed by enzymes lipooxygenase, amine dehydrogenase, and methylmalonyl-CoA mutase. In each case, the Saunders-Bell analysis was applied to calculate the tunnel effects and the corresponding thermodynamic parameters. The Saunders-Bell analysis was effective in 14 cases out of 22. A high degree of correlation was found between the barrier factor, the tunnel factor, and the entropy factor among all reactions studied. From this, a general relationship between the three factors was derived, based on the Saunders-Bell analysis of the Bell equation; the Saunders-Bell analysis is valid within certain limits of the barrier factor. This general relationship is universally valid for all hydrogen/deuterium transfer reactions in nature with moderate tunneling, when the Saunders-Bell analysis applies.     

Phase morphology of iPP/aPS/SEP blends

Supermolecular structure and phase morphology of the ternary isotactic polypropylene/atactic polystyrene/poly(styrene-b-ethylene-co-propylene) (iPP/aPS/SEP) compression molded blends with 100/0, 90/10, 70/30, and 50/50 iPP/aPS weight ratios and with different amounts of added SEP compatibilizer were studied by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD). SEP significantly reduced the size of dispersed aPS particles that enabled better spherulitization in the iPP matrix. Furthermore, iPP spherulites in ternary blends with 90/10 iPP/aPS weight ratio became larger in comparison with the pure iPP. TEM revealed that the SEP formed continuous interface layer around the dispersed aPS particles even when only 2.5 wt.% of SEP was added. Particle size distribution was distinctly bimodal. When the SEP content was increased to 10 wt.%, joining together smaller and bigger aPS and SEP particles formed dispersed aggregates. Additionally, both amorphous components (aPS and SEP) influenced crystallization process of iPP matrix and so modified, to some extent, its final supermolecular structure. SEP compatibilizer did not significantly affect crystallite orientation. The increase of crystallite sizes, which was more affected by the addition of aPS than by the addition of SEP, seemed to be influenced by the solidification effect rather than by the phase morphology of the blends.     

The de novo methylation activity of Dnmt3a is distinctly different than that of Dnmt1

Background  

Though Dnmt1 is considered the primary maintenance methyltransferase and Dnmt3a and Dnmt3b are considered de novo methyltransferases in mammals, these three enzymes may work together in maintaining as well as establishing DNA methylation patterns. It has been proposed that Dnmt1 may carry out de novo methylation at sites in the genome with transient single-stranded regions, such as replication origins, and then spread methylation from these nucleation sites in vivo, even though such activity has not been reported.     

Exciton dissociation dynamics in model donor-acceptor polymer heterojunctions. I. Energetics and spectra

In this paper we consider the essential electronic excited states in parallel chains of semiconducting polymers that are currently being explored for photovoltaic and light-emitting diode applications. In particular, we focus upon various type II donor-acceptor heterojunctions and explore the relation between the exciton binding energy to the band offset in determining the device characteristic of a particular type II heterojunction material. As a general rule, when the exciton binding energy is greater than the band offset at the heterojunction, the exciton will remain the lowest-energy excited state and the junction will make an efficient light-emitting diode. On the other hand, if the offset is greater than the exciton binding energy, either the electron or hole can be transferred from one chain to the other. Here we use a two-band exciton to predict the vibronic absorption and emission spectra of model polymer heterojunctions. Our results underscore the role of vibrational relaxation and suggest that intersystem crossings may play some part in the formation of charge-transfer states following photoexcitation in certain cases.     

Reference materials for marine science

Summary The second edition of the catalog of reference materials suited for use in marine science, originally compiled in 1986 for NOAA, IOC and UNEP, has been recently completed. The catalog lists more than 900 reference materials from thirteen producers and contains information about their proper use, sources, availability, and analyte concentrations. The reference material matrices include ashes, airborne particulate matter, gases, oils, rocks and sediments, sludges, tissues and waters. Reference materials used for the evaluation of instruments and the determination of sample physical properties are also included. Indices are available for elements, isotopes and organic compounds, as are cross references to CAS registry numbers, and alternate names and chemical structures of selected organic compounds.     

Backbone cleavages of [M - H](-) anions of peptides. Cyclisation of citropin 1 peptides involving reactions between the C-terminal [CONH](-) residue and backbone amide carbonyl groups. A new type of beta cleavage: a joint experimental and theoretical study

This paper reports the study of backbone cleavages in the collision-induced negative-ion mass spectra of the [M - H](-) anions of some synthetic modifications of the bioactive amphibian peptide citropin 1 (GLFDVIKKVASVIGGL-NH(2)). The peptides chosen for study contain no amino acid residues which could effect facile side-chain cleavage, i.e. Ser (-CH(2)O, side-chain cleavage) and Asp (-H(2)O) are replaced by Ala or Lys. We expected that such peptides should exhibit standard and pronounced peaks due to alpha cleavage ions (and to a lesser extent beta cleavage ions) in their collision-induced negative-ion spectra. This expectation was realised, but the spectra also contained peaks formed by a new series of cleavage anions. These are produced following cyclisation of the C-terminal CONH(-) moiety at carbonyl functions of amide groups along the peptide backbone; effectively transferring the NH of the C-terminal CONH(-) group to other amino acid residues. We have called the product anions of these processes beta' ions, in order to distinguish them from standard beta ions. Some beta' ions also fragment directly to some other beta' ions of smaller mass. The reaction coordinates of alpha,beta and beta' backbone processes have been calculated at the HF/6-31G*//AM1 level theory for simple model systems. The initial cyclisation step of the beta' sequence is barrierless and exothermic. Subsequent steps have a maximum barrier of +40 kcal mol(-1), with the overall reaction being endothermic by some 30 kcal mol(-1) at the level of theory used. These calculations take no account of the complexity of the conformationally flexible peptide system, and it is surprising that each of the two reacting centres can 'find' each other in such a large system.