Ueber die Titration der Schwefels?ure mit Benzidinchlorhydrat

Zusammenfassung In Vorstehendem wurde zunächst die Ausführung der von einem von uns ausgearbeiteten Schwefelsäuretitration mittelst Benzidinchlorhydrats nochmals genau beschrieben, sodann wurden die Bedingungen festgestellt, unter denen verschiedene Schwefelsäuremengen am genauesten zu bestimmen waren. Es hat sich dabei herausgestellt, dass die Schwefelsäure bis zu 0,01g H₂SO₄ herunter nach der beshriebenen Methode auf 1–2 genau bestimmt werden kann. Die Anwendung der Methode auf verschiedene Fälle (Ammoniumsulfat, Alaun, Zinksulfat-heptahydrat, Mohr'sches Salz, Mangansulfat-tetrahydrat), wobei die Metalle in einigen Fällen vorher ausgefällt wurden, bestätigten die zuvor festgestellten Regeln; ausserdem wurde gezeigt, dass beim Ausfällen von Zink, Eisen und Mangan nach dem angegebenen Verfahren Schwefelsäure nicht mitgerissen wird. Die Zeit, welche eine derartige Bestimmung, auch wenn die beschriebenen Ausfällungen vorgenommen werden müssen, bei einiger Uebung erfordert, ist sehr kurz, weil alles Auswaschen und so weiter in Fortfall kommt, so dass auch hier ein Vortheil gegenüber dem gewichtsanalytischen Verfahren vorhanden ist.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Über grünes Bis-(2-Iminoisopropyl-thiophenolato)-nickel(II) und weitere, ähnliche NiII-Komplexe

Green Bis-(2-iminoisopropyl-thiophenolato)nickel(II) and other Similar Ni^II Complexes The compounds [Ni^II(iitp)₂] 1 (iitp = 2-iminoisopropyl-thiophenolate), [Ni(imptp)₂] · 2 CH₃OH 2 , a dinuclear compound with an Ni? Ni distance of 276 pm, and [PPh₄] · [Ni^II(imptp)(SCN)] 3 (imptp = 2-(2-iminopentane-4-on)-thiophenolate) have been prepared by the reaction of nickel(II)-acetate-tetrahydrate with 2-iminoisopropyl-thiophenole and 2-(2-iminopentane-4-on)-thiophenole in methanol, respectively. They have been characterized by single-crystal X-ray structure analysis and other physical methods. The redox behaviour of 1–3 has been studied in detail (chemically as well as by cyclovoltammetry and ESR spectroscopy). Particularly interesting are the electronic properties of 1 and its reduction with NaBH₄ and the following reaction of the product with O₂. The complexes are model compounds for some Ni-containing enzymes. For details of the crystal structure determination see “Inhaltsübersicht”.     

Nitrogen binding to the FeMo-cofactor of nitrogenase

Density functional calculations are presented to unravel the first steps of nitrogen fixation of nitrogenase. The individual steps leading from the resting state to nitrogen binding at the FeMo-cofactor with a central nitrogen ligand are characterized. The calculations indicate that the Fe-Mo cage opens as dinitrogen binds to the cluster. In the resting state, the central cage is overall neutral. Electrons and protons are transferred in an alternating manner. Upon dinitrogen binding, one protonated sulfur bridge is broken. An axial and a bridged binding mode of dinitrogen have been identified. Adsorption at the Mo site has been investigated but appears to be less favorable than binding at Fe sites.     

Binucleare Nickel(0)-Komplexe mit „Schlangenliganden”︁ vom 1-Azadientyp: Modellsysteme der oxidativen Kopplung von 1-Azadienen und 1,3-Dienen am Nickel(0)

Binuclear Nickel(0) Complexes with “Snake Ligands” of 1-Azadiene Type: Model Systems of the Oxidative Coupling of 1-Azadienes and 1.3-Dienes at Nickel(0) Synthesis, properties, and reactions of dimeric nickel(0) complexes with special 1-azadiene typ ligands (“snake ligands”) are described. The X-ray analysis of a typical compound (Bis-(bis-cinnamaldehyde-N,N'-propylendiimine)-dinickel(0)) shows that both central atoms have the coordination number 3. The four 1-azadiene groups are coordinated in a different way: unidendate coordination by N-Ni(1) bond and bidendate coordination by N-Ni(1) and olefine-Ni(2) bond. The compound is a good model system for the oxidative coupling reaction of 1-azadienes with 1.3-dienes at 2 nickel(0) centres. IR and electronic spectra show other complexes with this type of ligands to have an analogous coordination sphere.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Nuclear‐Spin Polarization in Electron‐Transfer Reactions of Amines

Chemically induced dynamic nuclear polarization (CIDNP) observed during electron transfer (ET) reactions of tertiary amines such as DABCO ( 1 ) or Et₃N ( 2 ) with a wide range of electron acceptors support the involvement of amine radical‐cations (e.g., 1^{. +} or 2^{. +} ) as key intermediates. Radical ions such as 2^{. +} may be deprotonated, generating neutral aminoalkyl radicals (e.g., 2^. ). When generated by reaction with an electron acceptor of energetically low triplet state such as naphthalene (¹Naph*), the resulting pair 2^{. +} /Naph^.? reacts mostly by reverse electron transfer (RET) from triplet pairs populating the naphthalene triplet state.     

Computer-Assisted Solution of Chemical Problems—The Historical Development and the Present State of the Art of a New Discipline of Chemistry

The topic of this article is the development and the present state of the art of computer chemistry, the computer-assisted solution of chemical problems. Initially the problems in computer chemistry were confined to structure elucidation on the basis of spectroscopic data, then programs for synthesis design based on libraries of reaction data for relatively narrow classes of target compounds were developed, and now computer programs for the solution of a great variety of chemical problems are available or are under development. Previously it was an achievement when any solution of a chemical problem could be generated by computer assistance. Today, the main task is the efficient, transparent, and non-arbitrary selection of meaningful results from the immense set of potential solutions—that also may contain innovative proposals. Chemistry has two aspects, constitutional chemistry and stereochemistry, which are interrelated, but still require different approaches. As a result, about twenty years ago, an algebraic model of the logical structure of chemistry was presented that consisted of two parts: the constitution-oriented algebra of be- and r-matrices, and the theory of the stereochemistry of the chemical identity group. New chemical definitions, concepts, and perspectives are characteristic of this logic-oriented model, as well as the direct mathematical representation of chemical processes. This model enables the implementation of formal reaction generators that can produce conceivable solutions to chemical problems—including unprecedented solutions—without detailed empirical chemical information. New formal selection procedures for computer-generated chemical information are also possible through the above model. It is expedient to combine these with interactive methods of selection. In this review, the Munich project is presented and discussed in detail. It encompasses the further development and implementation of the mathematical model of the logical structure of chemistry as well as the experimental verification of the computer-generated results. The article concludes with a review of new reactions, reagents, and reaction mechanisms that have been found with the PC-programs IGOR and RAIN.     

Determination of picogram amounts of lipoxin A4 and lipoxin B4 by high-performance liquid chromatography with electrochemical detection

A new method for the determination of lipoxins with electrochemical detection after high-performance liquid chromatography is described. The half-wave potentials of lipoxin A4 and lipoxin B4 at a glassy carbon electrode and a mobile phase of methanol-water (65:35 v/v) and 1 mM trifluoroacetic acid was found to be +1.14 V versus an Ag/AgCl reference electrode. The use of trifluoroacetic acid instead of sulphuric acid and lithium perchlorate led to a background current of 6-8 nA at +1.20 V. The detection limits for both lipoxins, based on a signal-to-noise ratio of 3:1 were found to be 5-10 pg (15-30 fmol). The new method was applied to an extract of human polymorphonuclear granulocytes, preincubated with 15-hydroxyeicosatetraenoic acid and stimulated with Ca2+ ionophore A23187.     

Bead injection for surface enhanced Raman spectroscopy: automated on-line monitoring of substrate generation and application in quantitative analysis

The technique of bead injection has been adapted for surface enhanced Raman scattering (SERS) to substantially improve precision, long term stability and sensitivity of SERS detection in analytical chemistry. For this purpose a fully automated flow system comprising a dedicated flow-cell has been developed and tested. With the developed flow-cell, which contains two inlet and two outlet channels, it is possible to retain, perfuse and discharge minute amounts of polymer beads while monitoring all steps by Raman spectroscopy. First, beads carrying cation exchanger moieties were retained in the flow-cell and subsequently perfused with a silver nitrate and a hydroxylamine solution using one inlet of the flow cell. By this sequence homogeneous SERS active silver layers were formed on the beads. The uniformity of the achieved silver layer was studied by secondary electron microscopy. For measurement, the analyte was then introduced from the second inlet channel such that the interaction between the activated SERS beads and analyte occurred in close proximity and within the focus of the laser excitation beam. Due to the complete computer control of all experimental steps, including bead entrapment, SERS layer generation, sample introduction and final bead removal, highly reproducible conditions for SERS were achieved. The method was developed using 9-aminoacridine as a test molecule. Quantitative studies were carried out for 9-aminoacridine and acridine showing linear calibrations from 1-100 nmol l(-1) and 50-1,000 nmol l(-1), respectively, using a sample volume of 200 microl each. Typical relative standard deviations were 4.7% for 9-aminoacrine and 5.8% for acridine.