Isomeric identification by laser control mass spectrometry

The influence shaped femtosecond laser pulses have on molecular photofragmentation and ionization, coupled with the intrinsic sensitivity of mass spectrometry, results in a powerful tool for fast, accurate, reproducible and quantitative isomeric identification. Complex phase functions are introduced to enhance differences during the laser-molecule interactions, which depend on geometric structure, resulting in different fragmentation fingerprints. A full account is given on the setup and results leading to a technique that can be used to distinguish between compounds normally indistinguishable by conventional electron ionization mass spectrometry. We demonstrate geometric and structural isomer identification of cis-/trans-3-heptene, cis-/trans-4-methyl-2-pentene, o-/p-cresol and o-/p-xylene. For the positional isomers of xylene we present a complete dataset consisting of 1024 different phases to explore phase complexity. A selection of two phases from that data can then be used to achieve quantitative identification in mixtures of xylene isomers. Finally, we evaluate receiver operational curves obtained from our experimental data to demonstrate the reliability that can be achieved by femtosecond laser control mass spectrometry.     

Dispersed lipid liquid crystalline phases stabilized by a hydrophobically modified cellulose

Aqueous dispersions of monoolein (MO) with a commercial hydrophobically modified ethyl hydroxyethyl cellulose ether (HMEHEC) have been investigated with respect to the morphologies of the liquid crystalline nanoparticles. Only very low proportions of HMEHEC are accepted in the cubic and lamellar phases of the monoolein-water system. Due to the broad variation of composition and size of the commercial polymer, no other single-phase regions were found in the quasi-ternary system. Interactions of MO with different fractions of the HMEHEC sample induced the formation of lamellar and reversed hexagonal phases, identified from SAXD, polarization microscopy, and cryogenic TEM examinations. In excess water (more than 90 wt %) coarse dispersions are formed more or less spontaneously, containing particles of cubic phase from a size visible by the naked eye to small particles observed by cryoTEM. At high polymer/MO ratios, vesicles were frequently observed, often oligo-lamellar with inter-lamellar connections. After homogenization of the coarse dispersions in a microfluidizer, the large particles disappeared, apparently replaced by smaller cubic particles, often with vesicular attachments on the surfaces, and by vesicles or vesicular particles with a disordered interior. At the largest polymer contents no proper cubic particles were found directly after homogenization but mainly single-walled defected vesicles with a peculiar edgy appearance. During storage for 2 weeks, the dispersed particles changed toward more well-shaped cubic particles, even in dispersions with the highest polymer contents. In some of the samples with low polymer/MO ratio, dispersed particles of the reversed hexagonal type were found. A few of the homogenized samples were freeze-dried and rehydrated. Particles of essentially the same types, but with a less well-developed cubic character, were found after this treatment.     

Forces between silica surfaces with adsorbed cationic surfactants: influence of salt and added nonionic surfactants

Forces have been measured between silica surfaces with adsorbed surfactants by means of a bimorph surface force apparatus. The surfactants used are the cationic surfactant tetradecyltrimethylammonium bromide (TTAB) and the nonionic surfactant hexakis(ethylene glycol) mono-n-tetradecyl ether (C(14)E(6)) as well as mixtures of these two surfactants. The measurements were made at elevated pH, and the effect of salt was studied. At high pH the glass surface is highly charged, which increases the adsorption of TTAB. Despite the low adsorption generally seen for nonionic surfactants on silica at high pH, addition of C(14)E(6) has a considerable effect on the surface forces between two glass surfaces in a TTAB solution. The barrier force is hardly affected, but the adhesion is reduced remarkably. Also, addition of salt decreases the adhesion, but increases the barrier force. In the presence of salt, addition of C(14)E(6) also increases the thickness of the adsorbed layer. The force barrier height is also shown to be related to literature values for surface pressure data in these systems.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Quantitative mass spectrometric identification of isomers applying coherent laser control

Mass spectrometry (MS) is one of the oldest and most trusted analytical methods for chemical identification. Advances in biology, such as metabolic analysis and proteomics, have fueled a growing number of refinements in this method. Unfortunately, isomers, for example, o- and p-xylene, are seldom identifiable by MS because they produce identical spectra. Time-consuming and less sensitive multidimensional methods are subsequently required for structural determination. The sensitivity of MS coupled with shaped femtosecond laser pulses that control molecular fragmentation and ionization results in a new, fast, and reproducible method for molecular identification which is used here to distinguish positional and geometric isomer compounds and quantify their relative concentration in mixtures.     

Pure and binary adsorption of CO2, H2, and N2 on activated carbon

A new developing field of application for pressure swing adsorption (PSA) processes is the capture of CO₂ to mitigate climate change, especially the separation of CO₂ and H₂ in a pre-combustion context. In this process scheme the conditions of the feed to the separation step, namely a pressure of 3.5 to 4.5 MPa and a CO₂ fraction of around 40% are favorable for an adsorption based separation process and make PSA a promising technology. Among the commercial adsorbent materials, activated carbon is most suitable for this application. To evaluate the potential, to benchmark new materials, and for process development a sound basis of the activated carbon thermodynamic data is required, namely equilibrium adsorption isotherms of the relevant pure components and mixtures, Henry’s constants and isosteric heats.     

A new polymorph of physcion

The structure of the title compound, 7‐methoxy‐2‐methyl‐4,5‐dihydroxyanthracene‐9,10‐dione, C₁₆H₁₂O₅, was originally reported by Ulickýet al. [Acta Cryst. (1991). C 47 , 1879–1881] in the space group P2₁2₁2₁ [polymorph (Io)]. The new polymorph, (Im), crystallizes in the space group P2₁/c. The molecular structures are closely similar, with both –OH groups forming intramolecular hydrogen bonds to one of the neighbouring quinone O atoms, thus slightly lengthening this C=O bond; the pattern of C—C bond lengths in the ring system is consistent with some contribution from a resonance form with a negative charge at the hydrogen‐bonded quinone O atom and an aromatic region around its neighbouring C atoms. The packing of (Im) is simpler than the extensively crosslinked pattern of (Io), with molecular tapes connected by classical (but three‐centre) and `weak' hydrogen bonds, parallel to [20].     

Annexin A6 is highly abundant in monocytes of obese and type 2 diabetic individuals and is downregulated by adiponectin in vitro

Adiponectin stimulates cholesterol efflux in macrophages and low adiponectin may in part contribute to disturbed reverse cholesterol transport in type 2 diabetes. Monocytes express high levels of annexin A6 that could inhibit cholesterol efflux and it was investigated whether the atheroprotective effects of adiponectin are accompanied by changes in annexin A6 levels. Adiponectin reduces annexin A6 protein whereas mRNA levels are not affected. Adiponectin-mediated activation of peroxisome proliferator-activated receptor α (PPARα) and AMP-activated protein kinase (AMPK) does not account for reduced annexin A6 expression. Further, fatty acids and lipopolysaccharide that are elevated in obesity do not influence annexin A6 protein levels. Annexin A6 in monocytes from overweight probands or type 2 diabetic patients is significantly elevated compared to monocytes of normal-weight controls. Monocytic annexin A6 positively correlates with body mass index and negatively with systemic adiponectin of the blood donors. Therefore, the current study demonstrates that adiponectin reduces annexin A6 in monocytes and thereby may enhance cholesterol efflux. In agreement with these in vitro finding an increase of monocytic annexin A6 in type 2 diabetes monocytes was observed.     

Poly(amidoamine) Conjugates Containing Doxorubicin Bound via an Acid‐Sensitive Linker

Poly(amidoamine)s with amino pendant groups were prepared by hydrogen‐transfer polyaddition of primary and secondary amines to bis‐acrylamines. Dansyl cadaverine (DC) doxorubicin (Dox) were bound to the polymers via a cis‐aconityl spacer to give conjugates containing 3 µg of DC per mg of polymer and 28 to 35 µg of Dox per mg of polymer. Release of DC and Dox at physiological and acidic pH varied from 0 to 35% over 48 h and was pH dependent. Although the ISA1Dox conjugate (IC₅₀ = 6 µg Dox · mL^?1) presented similar toxicity as the parent polymer without Dox, ISA23Dox showed increased toxicity (IC₅₀ = 10 µg Dox · mL^?1). These results suggest that ISA23Dox is able to release biologically active Dox in vitro and that this conjugate might be suitable for further development.