Structure and mechanism of action of isopentenylpyrophosphate-dimethylallylpyrophosphate isomerase

We have obtained the three-dimensional X-ray crystallographic structure of a C67A mutant Escherichia coli isopentenylpyrophosphate-dimethylallylpyrophosphate isomerase (EC 5.3.3.2) complexed with the bromohydrin of isopentenylpyrophosphate, at 1.93 A resolution. The overall backbone fold is very similar to that obtained previously for the wild-type enzyme in the presence of a divalent metal cation (Mn2+ or Mg2+). However, in the new structure, there are two metal binding sites, not just one. The first metal binding site is occupied by Mn2+, coordinated to three histidine and two glutamate residues, while the second is occupied by Mg2+, coordinated to two bromohydrin-ligand phosphate oxygens, the carbonyl oxygen of A67, a carboxyl oxygen of E87, and two water molecules. The C3 hydroxyl group of the bromohydrin inhibitor is involved in a short hydrogen bond to the carboxyl group of E116, one of the two Mn-bound glutamates. The structure obtained is consistent with a mechanism of action of the enzyme in which the carboxyl group of E116 protonates the double bond in isopentenylpyrophosphate, forming a carbocation, followed by removal of a C2 proton by the thiolate of C67, in the wild-type enzyme. The inhibition of the enzyme by a wide variety of other potent inhibitors is also readily explained on the basis of the bromohydrin inhibitor structure.     

Performance of the diffusive gradients in thin films technique for measuring Ca and Mg in freshwater

Measurements of the major cations Ca and Mg by the technique of diffusive gradients in thin films (DGTs) were systematically evaluated. The concentration in solution was calculated using Fick’s first law of diffusion from the directly measured flux to the DGT device. A selective cation exchange resin (Bio-Rad Chelex^®100), which has been used extensively with DGT for trace metals, such as Cd²⁺, Cu²⁺ and Ni²⁺, was used for this work.

Elution of Ca and Mg from the resin with 1 M HNO₃ was very reproducible. Measurements of Ca and Mg concentrations in synthetic solutions agreed well with the theoretical predictions. The negative response on uptake caused by lowered pH was investigated. Uptake was found to decline below pH 5. The capacity of the DGT device for Ca and Mg was also investigated to establish maximum deployment times for given concentrations.

Experiments with filtered and modified lake water show that DGT can be used to measure Ca and Mg when trace metals are present in the solution. An in situ deployment of DGT combined with an ultrafiltration study suggest that the Mg concentration measured by DGT is similar to the concentration found in the fraction <1 kDa.     

The rate of homolysis of adducts of peroxynitrite to the C=O double bond.

Nucleophilic addition of the peroxynitrite anion, ONOO(-), to the two prototypical carbonyl compounds, acetaldehyde and acetone, was investigated in the pH interval 7.4-14. The process is initiated by fast equilibration between the reactants and the corresponding tetrahedral adduct anion, the equilibrium being strongly shifted to the reactant side. The adduct anion also undergoes fast protonation by water and added buffers. Consequently, the rate of the bimolecular reaction between ONOO(-) and the carbonyl is strongly dependent on the pH and on the concentration of the buffer. The pK(a) of the carbonyl-ONOO adduct was estimated to be approximately 11.8 and approximately 12.3 for acetone and acetaldehyde, respectively. It is shown that both the anionic and the neutral adducts suffer fast homolysis along the weak O-O bond to yield free alkoxyl and nitrogen dioxide radicals. The yield of free radicals was determined to be about 15% with both carbonyl compounds at low and high pH, while the remainder collapses to molecular products in the solvent cage. The rate constants for the homolysis of the adducts vary from ca. 3 x 10(5) to ca. 5 x 10(6) s(-1), suggesting that they cannot act as oxidants in biological systems. This small variation around a mean value of about 10(6) s(-1) suggests that the O-O bond in the adduct is rather insensitive to its protonation state and to the nature of its carbonyl precursor. An overall reaction scheme was proposed, and all the corresponding rate constants were evaluated. Finally, thermokinetic considerations were employed to argue that the formation of dioxirane as an intermediate in the reaction of ONOO(-) with acetone is an unlikely process.     

Capillary electrophoretic detection in apolipoprotein E genotyping

We describe the application of capillary electrophoresis to detect DNA fragments, obtained after amplifying a part of the apolipoprotein E (apoE) gene with polymerase chain reaction (PCR). Compared to conventional agarose slab gel electrophoresis (AGE), CE appears the method of choice with regard to resolution and sensitivity, to detect DNA fragments in the range of 20-100 base pairs. Especially discrimination between apoE2/E2 and apoE2/E3 genotypes is more reliable with CE than with AGE, this being of great clinical value in the diagnosis of familiary dysbetalipoproteinemia.     

A model explaining declining rate in hydrolysis of lignocellulose substrates with cellobiohydrolase I (cel7A) and endoglucanase I (cel7B) of Trichoderma reesei

It is commonly observed that the rate of enzymatic hydrolysis of solid cellulose substrates declines markedly with time. In this work the mechanism behind the rate reduction was investigated using two dominant cellulases of Trichoderma reesei: exoglucanase Cel7A (formerly known as CBHI) and endoglucanase Cel7B (formerly EGI). Hydrolysis of steam-pretreated spruce (SPS) was performed with Cel7A and Cel7B alone, and in reconstituted mixtures. Throughout the 48-h hydrolysis, soluble products, hydrolysis rates, and enzyme adsorption to the substrate were measured. The hydrolysis rate for both enzymes decreases rapidly with hydrolysis time. Both enzymes adsorbed rapidly to the substrate during hydrolysis. Cel7A and Cel7B cooperate synergistically, and synergism was approximately constant during the SPS hydrolysis. Thermal instability of the enzymes and product inhibition was not the main cause of reduced hydrolysis rates. Adding fresh substrate to substrate previously hydrolyzed for 24 h with Cel7A slightly increased the hydrolysis of SPS; however, the rate increased even more by adding fresh Cel7A. This suggests that enzymes become inactivated while adsorbed to the substrate and that unproductive binding is the main cause of hydrolysis rate reduction. The strongest increase in hydrolysis rate was achieved by adding Cel7B. An improved model is proposed that extends the standard endo-exo synergy model and explains the rapid decrease in hydrolysis rate. It appears that the processive action of Cel7A becomes hindered by obstacles in the lignocellulose substrate. Obstacles created by disordered cellulose chains can be removed by the endo activity of Cel7B, which explains some of the observed synergism between Cel7A and Cel7B. The improved model is supported by adsorption studies during hydrolysis.     

Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Polymer-assisted laser desorption/ionization analysis of small molecular weight compounds

The use of non-polar, small polymers as matrices for the analysis of low molecular weight compounds in polymer-assisted laser desorption/ionization mass spectrometry (PALDI-MS) is demonstrated. The matrices evaluated were either based on an oligothiophene or a benzodioxin backbone. Metallocenes, polycyclic hydrocarbons, a fluorosurfactant, and a subset of small organic compounds with various functionalities, served as model analytes. The mechanism of ionization charge transfer is discussed and ionization potentials for the matrices in the study have been estimated using density functional theory (DFT) calculations. Some of the results are possibly contradictory to the generally accepted limiting conditions for gas-phase charge-transfer reactions. These results are interpreted in the light of energy pooling. Also a new mass calibration procedure for the low-mass region in positive ion mode is presented, and some aspects of the ionization/desorption process leading to radical cations are studied.     

Cellular Fucosylation Inhibitors Based on Fluorinated Fucose-1-phosphates**

Fucosylation of glycans impacts a myriad of physiological and pathological processes. Inhibition of fucose expression emerges as a potential therapeutic avenue for example in cancer, inflammation, and infection. In this study, we found that protected 2-fluorofucose 1-phosphate efficiently inhibits cellular fucosylation with a four to seven times higher potency than known inhibitor 2FF, independently of the anomeric stereochemistry. Nucleotide sugar analysis revealed that both the α- and β-GDP-2FF anomers are formed inside the cell. In conclusion, we developed A2FF1P and B2FF1P as potent new tools for studying the role of fucosylation in health and disease and they are potential therapeutic candidates.     

Continuous synthesis process of hexagonal nanoplates of P6m ordered mesoporous silica

Hexagonally ordered mesoporous silica coined COK-12 was synthesized in a continuous process by combining streams of sodium silicate and citric acid/sodium citrate buffered solution of (ethylene oxide)(20)-(propylene oxide)(70)-(ethylene oxide)(20) triblock copolymer (Pluronic P123) from separate reservoirs. COK-12 precipitated spontaneously upon combining both streams at nearly neutral pH and ambient temperature. Stable intermediates of the COK-12 formation process could be prepared by limiting sodium silicate addition. Investigation of these intermediates using small-angle X-ray scattering revealed COK-12 formed via an assembly process departing from spherical uncharged core-shell P123-silica micelles. The sterical stabilization of these micelles decreased upon accumulation of silicate oligomers in their shell. Aggregation of the spherical micelles led to cylindrical micelles, which aligned and adopted the final hexagonal organization. This unprecedentedly fast formation of P6m ordered mesoporous silica was caused by two factors in the synthesis medium: the neutral pH favoring uncharged silicate oligomers and the high salt concentration promoting hydrophobic interactions with surfactant micelles leading to silica accumulation in the PEO shell. The easy continuous synthesis process is convenient for large-scale production. The platelet particle morphology with short and identical internal channels will be advantageous for many applications such as pore replication, nanotube or fiber growth, catalytic functionalization, drug delivery, film and sensor development, and in nano dyes as well as for investigation of pore diffusion phenomena.