A field deployable method for a rapid screening analysis of inorganic arsenic in seaweed

Inorganic arsenic (iAs) in 13 store-bought edible seaweed samples and 34 dried kelp (Laminaria digitata) samples was determined by a newly developed, field-deployable method (FDM) with the aid of a field test kit for arsenic in water. Results from the FDM were compared to results from speciation analysis achieved by using high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The FDM consisted of a simple extraction method using diluted HNO₃ to quantitatively extract iAs without decomposing the organoarsenicals to iAs followed by the selective volatilisation of iAs as arsine (AsH₃) and subsequent chemo-trapping on a filter paper soaked in mercury bromide (HgBr₂) solution. Method optimization with a sub-set of samples showed 80–94% iAs recovery with the FDM with no matrix effect from organo-arsenic species in the form of dimethylarsinic acid (DMA) on the iAs concentration. The method displayed good reproducibility with an average error of ±19% and validation by HPLC-ICP-MS showed that the results from the FDM were comparable (slope = 1.03, R² = 0.70) to those from speciation analysis with no bias. The FDM can be conducted within an hour and the observed limit of quantification was around 0.05 mg kg^?1 (dry weight). This method is well suited for on-site monitoring of iAs in seaweed before it is harvested and can thus be recommended for use as a screening method for iAs in seaweed.

Open image in new window

Graphical abstract Screening seaweed for their inorganic arsenic concentration within one hour without bias has been made possible in the field by using a field deployable arsenic kit. Its accuracy and precision was compared to HPLC-ICPMS.

     

Protein deformation of lipid hybrid bilayer membranes studied by sum frequency generation vibrational spectroscopy

Structural deformations of lipid hybrid bilayer membranes induced by signal peptideless (SPL) proteins have been studied for the first time using the inherently surface specific nonlinear optical technique of sum frequency generation vibrational spectroscopy. Specifically, deformations of 1,2-distearoylphosphatidylglycerol(DSPG) membranes induced by interaction with FGF-1, a SPL protein which is released asa function of cellular stress through a nonclassical pathway, have been investigated. FGF-1 was found to induce lipid alkyl chain deformations in previously highly ordered DSPG membranes at the extremely low concentration of 1 nM at 60 degrees C. The deformation process was shown to exhibit a degree of reversibility upon removal of the protein by rinsing with buffer solution.     

Electrical transport and noise in semiconducting carbon nanotubes

We investigate electrical transport and noise in semiconducting carbon nanotubes. By studying carbon nanotube devices with various diameters and contact metals, we show that the ON-currents of CNFETs are governed by the heights of the Schottky barriers at the metal/nanotube interfaces. The current fluctuations are dominated by 1/f noise at low-frequencies and correlate with the number of transport carriers in the device regardless of contact metal.     

On the asymptotic behavior of the Laurent coefficients of a class of Dirichlet series

Matsuoka showed an asymptotic formula for the coefficients of the Laurent expansion of ζ (s) at s = 1. In the present paper we extend this result to a large class of Dirichlet series which was first studied by Chandrasekharan and Narasimhan. Our proofs are based on a saddle point argument and use the fact that the Dirichlet series under consideration admit a functional equation. The second author was supported by the FWF project S381O.     

Super‐Resolution Imaging of the Golgi in Live Cells with a Bioorthogonal Ceramide Probe

We report a lipid‐based strategy to visualize Golgi structure and dynamics at super‐resolution in live cells. The method is based on two novel reagents: a trans‐cyclooctene‐containing ceramide lipid (Cer‐TCO) and a highly reactive, tetrazine‐tagged near‐IR dye (SiR‐Tz). These reagents assemble via an extremely rapid “tetrazine‐click” reaction into Cer‐SiR, a highly photostable “vital dye” that enables prolonged live‐cell imaging of the Golgi apparatus by 3D confocal and STED microscopy. Cer‐SiR is nontoxic at concentrations as high as 2 μM and does not perturb the mobility of Golgi‐resident enzymes or the traffic of cargo from the endoplasmic reticulum through the Golgi and to the plasma membrane.     

Synthesis and Structure of Ionic Liquids Containing the ­[Al(OC6H4CN)4]– Anion

The synthesis, structure, and physical properties of ionic liquids (IL) bearing the novel [Al(O–C₆H₄–CN)₄]^– ion as counterion to the commonly used [NR₄]⁺, [PR₄]⁺ and imidazolium ions are reported. Both the influence of the alkyl chain length as well as the functionalization with cyano groups is studied. These ILs are easily obtained by reaction of Ag[Al(O–C₆H₄–CN)₄] with the corresponding ammonium, phosphonium, and imidazolium halides. The stability towards electrophilic cations was investigated. All prepared salts have a window for the liquid phase of ca. 200 °C and are thermally stable up to 450 °C. The solid‐state structures reveal only weak cation ··· anion and anion ··· anion interactions in accord with the observed low melting points (glass transition points).     

STM manipulation of a subphthalocyanine double-wheel molecule on Au(111)

A new class of double-wheel molecules is manipulated on a Au(111) surface by the tip of a scanning tunneling microscope (STM) at low temperature. The double-wheel molecule consists of two subphthalocyanine wheels connected by a central rotation carbon axis. Each of the subphthalocyanine wheels has a nitrogen tag to monitor its intramolecular rolling during an STM manipulation sequence. The position of the tag can be followed by STM, allowing us to distinguish between the different lateral movements of the molecule on the surface when manipulated by the STM tip.     

Acoustic Radiation Force Impulse-Imaging for the evaluation of the thyroid gland: a limited patient feasibility study

Purpose

Real-time tissue elastography, a qualitative elastography method, has shown promising results in the diagnostic work up of thyroid nodules. However, to our knowledge no study has evaluated a quantitative elastography method in the thyroid gland. The present study is a feasibility study evaluating Acoustic Radiation Force Impulse-Imaging, a novel quantitative elastography method in the thyroid gland.

Methods

ARFI-imaging involves the mechanical excitation of tissue using short-duration acoustic pulses to generate localized displacements in tissue. The displacements induce a lateral shear-wave propagation which is tracked using multiple laterally positioned ultrasound “tracking“ beams. Inclusion criteria were: thyroid nodules ?1 cm, non-functioning or hypo-functioning on radionuclide scanning, and cytological/histological assessment of thyroid nodule as reference method. All patients received conventional ultrasound, and examination of the thyroid gland including Power Doppler Ultrasound using a 9 MHz linear transducer, in addition real-time elastography (RTE) was performed at 9 MHz frequency and ARFI-imaging was performed at 4 MHz using Siemens (ACUSON S2000) B-mode-ARFI combination transducer.

Results

Sixty nodules in 55 patients were analyzed. Three nodules were papillary carcinoma. The stiffer the tissue the faster the shear wave propagates. The results obtained indicated that the shear wave velocity in thyroid lobes ranged between 0.5 and 4.9 m/s. The median velocity of ARFI-imaging in the healthy nodule-free thyroid gland, as well as in benign and malignant thyroid nodules was 1.98 m/s (range: 1.20-3.63 m/s), 2.02 m/s (range: 0.92-3.97 m/s), and 4.30 m/s (range: 2.40-4.50 m/s), respectively. While no significant difference in median velocity was found between healthy thyroid tissue and benign thyroid nodules, a significant difference was found between malignant thyroid nodules on the one hand and healthy thyroid tissue (p = 0.018) or benign thyroid nodules (p = 0.014) on the other hand. Specificity of ARFI-imaging for the differentiation of benign and malignant thyroid nodules was comparable with RTE (91-95%).

Conclusions

ARFI can be performed in the thyroid tissue with reliable results.     

Reflections on spontaneous asymmetric synthesis by amplifying autocatalysis

Spontaneous generation of chirality was observed in the course of studying the mechanism of asymmetric autocatalysis by NMR in ZnR2 alkylation of pyrimidin-5-aldehydes. A systematic study was carried out in order to discover its origins. Even in clean fresh non-glass reaction vessels spontaneous ee was clearly observed, and was not dependent on any single reaction parameter. For comparison it was demonstrated that enantiomerically pure Zn alkoxide catalyst could control the configuration of the reaction product even when present at below micromolar concentrations. The high propensity of the Soai reaction system to produce an enantiomerically enriched product without initial bias is suggested to result from stochastic effects. These are especially important in autocatalysis because all the final products can be derived by breeding from a small number of initial events. The statistical excess of one enantiomer in that set is sufficient to generate a measurable ee in the product. The process is aided by the requirement for dimerisation before the product is an active catalyst. An enumeration that rationalises these observations is provided.